Explain the principle and construction of Planetary Mixer.

Explain the principle and construction of Planetary Mixer.
by

1 Answer

Answer :

Principle :- 

• The planetary mixer consists of stationary vessel & anchor shape blade which has planetary motion.

• The anchor shape blade rotates on its axis & axis moves around .

Construction:- 

i) It consists of a stationary vessel which is made up of stainless steel.

ii) The vessel can be removed either by lowering it beneath the blade or raising the blade above the vessel

iii) The moving blade mounted from the top of the vessel.

iv) The mixing shaft is driven by planetary gear connected to an electric meter.

Diagram

image

by

Related questions

Explain the construction and working of silverson mixer homogenizer.

Description : Explain the construction and working of silverson mixer homogenizer. 

Last Answer : Construction It consists of emulsified head which is covered with fine meshed stainless steel sieve. The emulsifier head consist of a number of blades which rotates at a very high speed, to produce ... blades. So a fine emulsion is produced which is then expelled out. Diagram:

Describe the principle, construction, working and uses of cyclone separator.

Description : Describe the principle, construction, working and uses of cyclone separator.

Last Answer : Principle: Centrifugal force   Construction-  1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of the vessel is fitted ... the suspension of a solid in gas 2. It can be used with liquid suspension of solid

Write the principle, construction, working and uses of the disintegrator.

Description : Write the principle, construction, working and uses of the disintegrator.

Last Answer : Principle: The Disintegrator works on the principle of impact.  Construction:  The Disintegrator consists of steel drum having a shaft in the centre. The shaft contains a disc, on which four beaters are ... Use:   This mill is used to powder all types of drugs including very hard drugs.

Give principle construction and working of hammer mill with neat diagram.

Description : Give principle construction and working of hammer mill with neat diagram.

Last Answer : PRINCIPLE: Impact CONSTRUCTION: It consists of a stout metal casing enclosing to which four or more swinging hammer are attached. The lower part of the casing consists of a screen , through which ... are not fixed . The mill can produce coarse to moderately fine powder. DIAGRAM:

Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Description : Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Last Answer : 1. BCG vaccine: It is freeze- dried preparation containing live culture of the bacillus Calmette and Guerin strain of Mycobacterium tuberculosis. Method of preparation : The bacilli are grown on a ... Use: Useful for the preparation of fine emulsion and suspension. Diagram:

What are the equipments used for mixing of liquids? Give in detail about ‘Propeller Mixer’.

Description : What are the equipments used for mixing of liquids? Give in detail about ‘Propeller Mixer’.

Last Answer : Equipments used for mixing of Liquids i .Propeller mixer ii .Turbine mixer iii .Paddle mixer Propeller Mixers Construction: .It consists of vessel and propeller, Propeller usually operates at ... : Application: It is used for mixing of liquids having low viscosity.

Explain construction and working of “Evaporation Still”

Description : Explain construction and working of “Evaporation Still”

Last Answer : Construction:  It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to the ... liquid is evaporated and condensed into the condenser 4) The product is collected through product outlet.

Explain construction and working of filter candle.

Description : Explain construction and working of filter candle.

Last Answer : Construction: These are cylindrical candles with an opening, The opening is connected to vacuum pump for reducing pressure under it, durin filtration process. The candles are made up of ... thick wall of the candle & gets collected inside the candle from where it is removed. 

Explain the construction and working of ‘Meta Filter’.

Description : Explain the construction and working of ‘Meta Filter’.

Last Answer : Construction: i. It consists of grooved, drainage rod on which a number of metallic ring are packed. ii. The rings are usually of stainless steel and have 0.8 mm outer thickness, 15 mm inside ... pack of ring act as a base on which the fine filtration medium is supported Diagram: 

Explain the construction and working of cyclone separator.

Description : Explain the construction and working of cyclone separator.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram

Explain the construction and working of filter press.

Description : Explain the construction and working of filter press.

Last Answer : Construction: It consists of alternative plate and frame mounted on two parallel support bars. The pressure can be applied through screw thread so that the plate and frame are rigidly fixed between ... Thickness of cake can be varied by using frame of different thickness. Diagram:

Explain theory and construction of FBD.

Description : Explain theory and construction of FBD.

Last Answer : Theory of FBD: The equipment works on a principle of fluidization of the feed materials. In fluidization process, hot air is introduced at high pressure through a perforated bed of moist solid particulate. The wet solids ... from 5 kg to 200 kg with an average drying time of about 20-40 min.   

With a well labeled diagram explain the construction of Autoclave.

Description : With a well labeled diagram explain the construction of Autoclave.

Last Answer : Construction: It consists of a strong metallic chamber usually made of stainless steel.  It has a cover fitted with a steam vent, pressure gauze and a safety valve. Rubber gasket is ... inner chamber is place on the stand. The material to be sterilized is loosely packed into it.

Explain construction and application of tray dryer.

Description : Explain construction and application of tray dryer.

Last Answer : Construction of tray dryer.   The simplest form of dryer , the source of heat ( electric heater or steam coil) is at floor level & relies on natural convection. Therefore no efficient ... of crude drugs 2)For chemicals 3)For powders 4)For Granules used in tablet manufacturing 

Explain construction and working of ball mill.

Description : Explain construction and working of ball mill.

Last Answer : Principle: Impact and Attrition. Construction: It consists of a hollow cylinder which is mounted on a metallic frame in such a way that it can be rotated on its longitudinal axis. The cylinder contains ... material is taken out and passed through a sieve to get powder of the required size. 

Explain the construction and working of triple roller mill.

Description : Explain the construction and working of triple roller mill.

Last Answer : Construction: It consists of 3 rollers. Rollers are made up of hard abrasion resistant material. Rollers are arranged very close to each other's. Rollers are rotated at different speed & in ... A Scraper is provided to remove the material from roller no.3 Diagram: 

Explain working,construction of filter leaf with neat diagram.

Description : Explain working,construction of filter leaf with neat diagram. 

Last Answer : Construction of filter leaf   It consists of metal frame enclosing a wire screen or a grooved plate. The screen is covered by filter cloth which is fitted in frame, to grip the cloth. The frame ... . The cake can be washed by immersing in a vessel containing water or reverse flow of air

Explain construction and working of cyclone separator with a well labelled diagram.

Description : Explain construction and working of cyclone separator with a well labelled diagram.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram  

Explain construction and working of Cutter mill or Hammer mill

Description : Explain construction and working of Cutter mill or Hammer mill

Last Answer : CONSTRUCTION: It consists of a hopper at top and metal casing enclosing two sets of knives i.e. stationary knives attached to stator and rotating are attached to rotor. The lower part of the casing consists ... are not fixed. The mill can produce coarse to moderately fine powder DIAGRAM:  

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Explain principle of freeze drying. Give its advantages.

Description : Explain principle of freeze drying. Give its advantages.

Last Answer : Principle:  i. The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. ii. ... it is properly sealed in an inert atmosphere. vii. The sterility of the product can be maintained. 

Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Description : Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Last Answer : which of the following mill works on the principle of combined impact and attrition

Describe construction and working of double cone blender.

Description : Describe construction and working of double cone blender.

Last Answer : Diagram: Construction: Double cone blender is made up of stainless steel and is available in different capacity ranging from 5 kg to 200 kg or even more. The efficiency of ... to produce shearing action and design is useful for mixing powders of different densities in small quantities.

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Describe the construction and working of evaporating pan with neat diagram.

Description : Describe the construction and working of evaporating pan with neat diagram.

Last Answer : Construction:  i. It consists of a hemispherical pan made from copper or stainless steel and surrounded by a steam jacket. ii. Hemispherical shape provides large surface area for evaporation. iii. ... . iv. After evaporation remove the product from product outlet. Diagram:

Discuss the theory, construction, and working of freeze drying apparatus

Description : Discuss the theory, construction, and working of freeze drying apparatus

Last Answer : Theory: Freeze drying or sublimation drying consists of simply reducing the temperature & pressure to values below the triple point .(4.579mm of Hg& temp. of 0.0099 c) Under these ... . 5. Packing: Biological products are dried packed in aseptic condition immediately after drying.

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Describe construction of autoclave with diagram.

Description : Describe construction of autoclave with diagram. 

Last Answer : Construction:   It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze and a safety valve. Rubber gasket is fitted on the inner side ... the stand. The material to be sterilized is loosely packed into it. Diagram:

Give application of simple distillation. What is the principle of fractional distillation?

Description : Give application of simple distillation. What is the principle of fractional distillation?

Last Answer : Applications of simple distillation:  i. It is used for the preparation of distilled water and water for injection. ii. Preparation of many volatile oils and aromatic water. iii. Purification ... becomes richer with the liquid having the lower boiling point which gets condensed in a condenser. 

Give the principle and working of Fluidised bed dryer.

Description : Give the principle and working of Fluidised bed dryer.

Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.

Give principle and working of “Fluid Energy mill”

Description : Give principle and working of “Fluid Energy mill”

Last Answer : Principle:  It works on the principle of combined impact and attrition. Working   1. The material which is to be size reduced is fed in the grinding chamber from the bottom through the feed ... -treated to reduce the particle size to the order of 100# and then passed through fluid energy mill

Give the principle, working and application of” Fractional distillation.

Description : Give the principle, working and application of” Fractional distillation.

Last Answer : Principle of fractional distillation:  It differs from simple distillation in that Partial condensation of vapour is allowed to occur in a fractionating column through which the vapour must pass before reaching ... , such as alcohol & water, acetone & water, Chloroform & Benzene.

Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Description : Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Last Answer : Homogenization is the process of preparing fine emulsion from a coarse emulsion by converting the large globules in to small globules. Principle: These work on the principal of braking large ... thus reduced to fine particle size The material is thrown outward due to centrifugal action

Give principle, method and application of sterilization using UV radiation.

Description : Give principle, method and application of sterilization using UV radiation.

Last Answer : Principle:   Direct sunlight can destroy the microorganism on account of its ultra-violet rays of longer wave length. UV light of shorter wavelength kills or inactivates microorganisms by ... . Sterilization of thermolabile material. Sterilization of surface of working table.

Give principle, working and use of autoclave

Description : Give principle, working and use of autoclave

Last Answer : Principle:  Moist heat sterilization is a method of sterilization in which steam is used for sterilization. The steam has more penetration power and more thermal capacity than dry heat. ... by autoclaving. o Used for sterilization of a majority of official injections and eye drops. 

Give principle, working and use of fluidized bed drier.

Description : Give principle, working and use of fluidized bed drier. 

Last Answer : Principle: If a gas is allowed to flow upward through a bed of solid particle at a velocity greater than the settling velocity of the particle, particle partially suspended in the gas stream. The ... process for tablet preparation It is used in coating. Used for drying of filter cake.

Explain the factors affecting evaporation of a liquid.

Description : Explain the factors affecting evaporation of a liquid.

Last Answer : Factor affecting evaporation  1. Temperature: The rate of evaporation is directly proportional to the temperature of the liquid. The evaporation can be accelerated by increasing the temperature but it ... of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Explain in detail evaporating still with its advantage and disadvantages.

Description : Explain in detail evaporating still with its advantage and disadvantages.

Last Answer : It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to condenser. Hemispherical shape ... heat transfer is poor. Heating surface is limited. Not suitable for thermolabile material.

State and explain the steps involved in sugar coating of tablet.

Description : State and explain the steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet: Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the fine ... on the canvas cloth. This gives a proper shining to the tablets Sugar coating is an art 

Explain The theory of freeze drying and state its application.

Description : Explain The theory of freeze drying and state its application.

Last Answer : Theory:-  i) In this process, the material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water vapours is ... antibiotics, blood products, vaccines, enzymes preparation, microbiological cultures & other thermo labile pharmaceutical substances.

State and explain the stages of simple Percolation

Description : State and explain the stages of simple Percolation

Last Answer : Stages of Percolation:- a) Imbibition b) Maceration c) Percolation a) Imbibition :-   1) Powders drug is moistened with a sufficient quantity of menstruum & allowed to stand for 4 hrs in ... constituents present in the drug by the slow passage of the menstruum through the column of the drug.

Explain the importance of closures.

Description : Explain the importance of closures.

Last Answer : Closures are used: To prevent loss of material. To avoid contamination. To prevent deterioration. To prevents spoilage. 

Explain the terms. a) Arka b) Svarasas

Description : Explain the terms. a) Arka b) Svarasas

Last Answer : Arka: It is the liquid preparation obtained by distillation of certain liquid or crude drug soaked in water using distillation unit. They are used in fever, dyspepsia and as cooling lotion when ... fresh medicinal plants in a mortar and expressed and then strained through a clean muslin cloth.

What are various ‘ Novel drug delivery systems’- explain implants.

Description : What are various ‘ Novel drug delivery systems’- explain implants. 

Last Answer : Various drug delivery systems are:  1. Implants 2. Liposome drug carriers 3. Nanoparticles 4. Prodrugs 5. Films and strips 6. Erythrocytes Implants: The hypodermic tablets are placed under the ... placed in the upper thigh at a depth of 5 mm. These implants are useful in hormone therapy.

Explain the theory of fractional distillation?

Description : Explain the theory of fractional distillation?

Last Answer : Theory of fractional distillation:  i. When substance dissolved in liquid, the vapour pressure of liquid is lowered. ii. When two miscible liquids are mixed together each will act as ... from two miscible liquids at boiling point is richer in component exerting the greater partial pressure.

Explain the factors which affect rate of filtration by Darcy’s law.

Description : Explain the factors which affect rate of filtration by Darcy’s law.

Last Answer : According to Darcy's Law, Where  v = volume of filtrate  K= permeability coefficient & is dependent on filter medium & filter cake.  A = Area of filter bed ... filtration. As the filtration process proceeds, thickness of cake increases which decreases the rate of filtration. 

Explain the objectives of mixing. Explain the different types of mixtures.

Description : Explain the objectives of mixing. Explain the different types of mixtures. 

Last Answer : Objective of mixing 1) To form a uniform mixture. 2)To promote chemical reaction to get uniform product 3) Help in formation of suspension/paste 4) Help in mixing of water and oil .e.g. emulsion. ... not have tendency to mix but once mix, don't separate after mixing. E.g. ointment, paste, cream.

Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Description : Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Last Answer : Evaporation Distillation:  1. Free escape of vapors from the surface of liquid below its boiling point. Evaporation takes place even at room temperature 1) Process of ... Concentration of liquid and to separate non volatile solid from the volatile liquid such as alcohol and ether.

Explain the different steps involved in sugar coating of tablet.

Description : Explain the different steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet:-  Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the ... the wax coated tablets are rubbed on the canvas cloth. This gives a proper shining to the tablets

Explain the factors which affect the rate of evaporation of a liquid.

Description : Explain the factors which affect the rate of evaporation of a liquid.

Last Answer : Factors affecting rate of evaporation: 1. Temperature: The rate of evaporation is directly proportional to the temperature of liquid. The evaporation can be accelerated by increasing the temp ... : The rate of evaporation is directly proportional to the vapour pressure of evaporating liquid.