______ has zero temperature co-efficient of resistance.

 ______ has zero temperature co-efficient of resistance.
by

1 Answer

Answer :

 Manganin has zero temperature co-efficient of resistance.

by

Related questions

What is the temperature co-efficient of resistance?

Description : What is the temperature co-efficient of resistance?

Last Answer : Temperature co-efficient of the resistance of any substance is, change in its original resistance due to the change in temperature. The temperature co-efficient of resistance of material is the ratio of ... of the material (strictly at 0°C). Formula for the resistance measurement is,

The transducer with negative temperature co-efficient of resistance is

Description : The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

Temperature co-efficient of resistance is expressed in terms of?

Description : Temperature co-efficient of resistance is expressed in terms of?

Last Answer : Degree celsius

Substances whose specific resistance abruptly decreases at very low temperature are called

Last Answer : Substances whose specific resistance abruptly decreases at very low temperature are called superconductors.

The metal having the lowest temperature coefficient of resistance is

Description :  The metal having the lowest temperature coefficient of resistance is

Last Answer : The metal having the lowest temperature coefficient of resistance is gold.

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

. In a shell and tube heat exchanger, the tube side heat transfer co￾efficient just at the entrance of the tube is (A) Infinity (B) Zero (C) Same as average heat transfer co-efficient for tube side (D) None of these

Description : . In a shell and tube heat exchanger, the tube side heat transfer co￾efficient just at the entrance of the tube is (A) Infinity (B) Zero (C) Same as average heat transfer co-efficient for tube side (D) None of these

Last Answer : (A) Infinity

What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Description : What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Last Answer : (A) Zero

Joule-Thomson co-efficient for a perfect gas is (A) Zero (B) Positive (C) Negative(D) None of these

Description : Joule-Thomson co-efficient for a perfect gas is (A) Zero (B) Positive (C) Negative (D) None of these

Last Answer : (A) Zero

Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of a component is equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Description : Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of ... equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Last Answer : (D) The fugacity co-efficient is zero for an ideal gas

The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Description : The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Last Answer : (c) unity

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Description : Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Last Answer : (C) The largest

If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Description : If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Last Answer : (B) Always between h1 and h2

Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Description : Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Last Answer : (D) None of these

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Description : Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Last Answer : (C) Pyrex

Co-efficient of wind resistance of a circular surface, is (A) 1/2 (B) 1/3 (C) 2/3 (D) 3/2

Description : Co-efficient of wind resistance of a circular surface, is  (A) 1/2  (B) 1/3  (C) 2/3  (D) 3/2

Last Answer : (C) 2/3

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

______ is an example of piezoelectric material.

Last Answer :  Quartz is an example of piezoelectric material.

______ is most commonly used for making magnetic recording tape.

Description : ______ is most commonly used for making magnetic recording tape.

Last Answer : Ferric oxide is most commonly used for making magnetic recording tape.

The co-ordination number of a simple cubic structure is

Description : The co-ordination number of a simple cubic structure is

Last Answer : The co-ordination number of a simple cubic structure is 6.

For a particular material the Hall coefficient was found to be zero. The material is

Last Answer : For a particular material, the Hall coefficient was found to be zero. The material is metal.

Surface resistance of an insulating material is reduced due to the

Last Answer : Surface resistance of an insulating material is reduced due to the smoky and dirty atmosphere, humidity in the atmosphere.

If the resistance of a conductor does not vary in accordance with Ohm's law it is known as

Last Answer : If the resistance of a conductor does not vary in accordance with Ohm's law it is known as non-linear conductor

Prior to taking a resistance reading with a volt-ohm-milliammeter, the 'zero' setting must be adjusted. After clipping the two leads together, you find the adjustment knob will not return the pointer to 'zero'. This is most likely an indication of ______ A. an improper resistance range setting B. weak batteries C. a faulty zero ohms knob D. a faulty meter movement

Description : Prior to taking a resistance reading with a volt-ohm-milliammeter, the 'zero' setting must be adjusted. After clipping the two leads together, you find the adjustment knob will not return the pointer ... range setting B. weak batteries C. a faulty zero ohms knob D. a faulty meter movement

Last Answer : Answer: B

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Mass transfer co-efficient of liquid is (A) Affected more by temperature than that for gases (B) Affected much less by temperature than that for gases

Description : Mass transfer co-efficient of liquid is (A) Affected more by temperature than that for gases (B) Affected much less by temperature than that for gases

Last Answer : (A) Affected more by temperature than that for gases

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

As the difference between the wall temperature and bulk temperature increases, the boiling heat transfer co-efficient (A) Continues to increase (B) Continues to decrease (C) Goes through a minimum (D) Goes through a maximum

Description : As the difference between the wall temperature and bulk temperature increases, the boiling heat transfer co-efficient (A) Continues to increase (B) Continues to decrease (C) Goes through a minimum (D) Goes through a maximum

Last Answer : (C) Goes through a minimum

Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Description : Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Last Answer : (D) None of these

Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Description : Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Last Answer : (A) Increasing temperature

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Description : The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Last Answer : (C) Heat transfer area

It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Description : It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Last Answer : (C) Low film co-efficient

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Last Answer : (A) Large temperature differentials

The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Description : The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Last Answer : (A) Increasing temperature of the vapour

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Description : Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Last Answer : (A) Low co-efficient of expansion

Co-efficient of Performance (COP) of a refrigerator is the ratio of the (A) Work required to refrigeration obtained (B) Refrigeration obtained to the work required (C) Lower to higher temperature (D) Higher to lower temperature

Description : Co-efficient of Performance (COP) of a refrigerator is the ratio of the (A) Work required to refrigeration obtained (B) Refrigeration obtained to the work required (C) Lower to higher temperature (D) Higher to lower temperature

Last Answer : (B) Refrigeration obtained to the work required

Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Description : Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Last Answer : (B) Increases

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these