The moving iron voltmeters are likely:

by

1 Answer

Answer :

The moving iron voltmeters are likely: To indicate lower value of ac than on dc.

by

Related questions

Two voltmeters have the same range 0-400V. The internal impedance ...

Description : Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are

Last Answer : Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are 360V and 240V.

Horizontally mounted moving iron instruments use

Description : Horizontally mounted moving iron instruments use   (a) Eddy current damping (b) Electromagnetic damping (c) Fluid friction damping (d) Air friction damping

Last Answer : Horizontally mounted moving iron instruments use Air friction damping

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

In a moving iron meter, the deflecting torque is proportional to

Last Answer : In a moving iron meter, the deflecting torque is proportional to Square of the current through the coil.

A moving iron ammeter may be compensated for frequency errors by

Last Answer : A moving iron ammeter may be compensated for frequency errors by shunt capacitance.

Moving iron and PMMC instruments can be distinguished from each other by looking at:

Last Answer : Moving iron and PMMC instruments can be distinguished from each other by looking at: Scale

A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when ...

Description : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:

Last Answer : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:  2.0.

A moving iron instrument can be used for?

Last Answer : A moving iron instrument can be used for both D.C. and A.C.

Why ammeters have to be arranged in class and voltmeters in parallel circuit ?

Description : Why ammeters have to be arranged in class and voltmeters in parallel circuit ?

Last Answer : Ammeter must be added to the class because it measures the flow. When added in parallel, the flow will be divided into two parts. As a result, the exact value of the flow cannot be ... because adding voltage will change the voltage difference. But in parallel the voltage difference does not change.

`A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Description : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Last Answer : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is ... )` D. `V_(A)ne V_(B)ne V_(C )`

`A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Description : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Last Answer : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is ... )gtV_(3)` D. `V_(1)gtV_(2)=V_(3)`

What are voltmeters used for?

Description : What are voltmeters used for?

Last Answer : A voltmeter measures the voltage between two points in an electrical current. Voltmeters are commonly used to test the remaining life in a battery.

Most AC voltmeters are calibrated to indicate __________. A. peak-to-peak voltage B. root-mean-square voltage C. average voltage D. peak voltage only

Description : Most AC voltmeters are calibrated to indicate __________. A. peak-to-peak voltage B. root-mean-square voltage C. average voltage D. peak voltage only

Last Answer : Answer: B

AC voltmeters are generally calibrated to read the ________. A. instantaneous voltage B. average voltage C. RMS voltage D. peak voltage

Description : AC voltmeters are generally calibrated to read the ________. A. instantaneous voltage B. average voltage C. RMS voltage D. peak voltage

Last Answer : Answer: C

Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Description : Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Last Answer : Answer: B

List the six safety precautions for the use of voltmeters.

Description : List the six safety precautions for the use of voltmeters.

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

What are the advantages of using two voltmeters in series?

Description : What are the advantages of using two voltmeters in series?

Last Answer : Increased input impedance, greater accuracy, and increased voltage range.

Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Description : Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Last Answer : sinusoidal

All voltmeters except one of the following are operated by the passage of current

Description : All voltmeters except one of the following are operated by the passage of current

Last Answer : electrostatic

Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction...

Description : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to

Last Answer : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to Large electrostatic forces.

Electronic Voltmeters which use rectifiers employ negative feedback. This is done -

Description : Electronic Voltmeters which use rectifiers employ negative feedback. This is done -  a) To increase the overall gain b) To improve stability c) To overcome non -linearity of the diodes d) None of the above

Last Answer : Electronic Voltmeters which use rectifiers employ negative feedback. This is done - To overcome non -linearity of the diodes

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD)

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Last Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

Permanent magnet moving coil instruments are used for

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

In a moving coil instrument, the deflecting torque is proportional to

Last Answer :  In a moving coil instrument, the deflecting torque is proportional to Current.

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

In moving coil meters, damping is provided by

Last Answer : In moving coil meters, damping is provided by eddy current disk.

The damping torque must operate only when the moving system of the indicating instrument is:

Last Answer : The damping torque must operate only when the moving system of the indicating instrument is: Actually moving

In a dynamo-meter type of moving coil instrument a swamping resistance is provided in order to:

Last Answer : In a dynamo-meter type of moving coil instrument a swamping resistance is provided inorder to: Provide equal time constant for moving coil and fixed coil, when used for ac measurement

In Weston synchronoscope the moving coil is connected across?

Last Answer : In Weston synchronoscope the moving coil is connected across bus-bars.

In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at?

Last Answer : In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at 120°.

The resistance in the circuit of the moving coil of a dynamometer wattmeter should be?

Last Answer : The resistance in the circuit of the moving coil of a dynamometer wattmeter should be high.

A moving-coil permanent-magnet instrument can be used as flux-meter?

Last Answer : A moving-coil permanent-magnet instrument can be used as flux-meter by eliminating the control springs.

A moving-coil permanent-magnet instrument can be used as what by using a low resistance shunt?

Last Answer : A moving-coil permanent-magnet instrument can be used as ammeter by using a low resistance shunt.

which device prevents the oscillation of the moving system and enables the latter to reach its final position quickly?

Last Answer : A damping device prevents the oscillation of the moving system and enables the latter to reach its final position quickly.

If a weather system is moving from the pacific coast to north carolinafrom which direction will the winds most likely blow?

Description : If a weather system is moving from the pacific coast to north carolinafrom which direction will the winds most likely blow?

Last Answer : Need answer

What will most likely happen is a toxin causes the hydrogen ion pump to stop moving h plus ions outside the mitochondrial membranes of the bird's cells?

Description : What will most likely happen is a toxin causes the hydrogen ion pump to stop moving h plus ions outside the mitochondrial membranes of the bird's cells?

Last Answer : Need answer

Rae dropped a bowling ball from a height of 8 meters. At which distance above the ground was the ball MOST likely moving at the greatest speed?

Description : Rae dropped a bowling ball from a height of 8 meters. At which distance above the ground was the ball MOST likely moving at the greatest speed?

Last Answer : Still accelerating til it hits earth. ====================================== The height from which she dropped the ball is irrelevant. In any case, the ball was most likely moving at the greatest speed just as it hit the ground. The answer to the question is: zero.

You are a project manager for Move It Now trucking company. Your company specializes in moving household goods across the city or across the country. Your A. 54 B. 66 C. 60 D. 30project involves upgrading the nationwide computer network for the company. Your lead engineer has given you the following estimates for a critical path activity: 60 days most likely, 72 days pessimistic, 48 days optimistic. What is the weighted average or expected value?

Description : You are a project manager for Move It Now trucking company. Your company specializes in moving household goods across the city or across the country. Your project involves upgrading the nationwide computer network for the ... the weighted average or expected value? A. 54 B. 66 C. 60 D. 30

Last Answer : C. 60

Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Description : Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Last Answer : C)inspection