How to Build a Deck Bench
You definitely enjoy a magnificent view sitting at the deck. Moreover, you can actually build a deck bench for yourself at cheap rates. Besides, they also add functionality to your backyard if they are moveable. If you are building a deck bench too, you should keep in mind that the view is on the line of sight and you should try building a backless bench. You should also consider whether the bench is to suffice for quite a few needs of yours like dining, entertaining and storing.
To build the bench (More tips on how to make a bench), you should have a decent idea about the space you should leave for each person. Generally, 30 inches per person should be enough. For a perfect view, the back should be low. deck benchHowever, is privacy is the concern, it had better be high. The slatted seats allow air circulation, making it more comfortable to sit through the hot summer days. In addition, the gaps help water from pooling in puddles on the chair, making them more users friendly. Use bolts, not nails, to secure joints at the structural level. Again, you should consider whether you want a freestanding bench that can be moved as per convenience or one that is fixed to the ground. Of course, on the decks that are at a height from the sea, you should go about attaching non-anchored benches against firm railings that are attached to the deck.
Railings allow securing the bench to the same post (Learn how to build deck railings). These help in fastening the uprights to the joists or supporting the deck. Benches can be attached to the decking, unlike rails. Of course, a professional carpenter can always design the bench for you, but if you are handy with nails and the saw, you should be able to build it yourself.
With 2×4 nailed between them to support the leg assemblies, you can taper 1×12s and attach them at each side of the two posts. For all outdoor projects, hot dipped, galvanized nuts and bolts should be used to prevent rusting. Three-side 3×4 boxes can be assembled for the legs. Now, you should nail the deck and the cross braces through, slipping these in for the backrest. The 1×12s can be nailed through the 2×4 boxes. Now, whether everything is level, square and plumb or not should be checked. You can round off the edges of the back slats and the 2×4 seats with a router or planer to get the extra level of comfort in to your bench. Pre-routed boards are also a good alternative. Splint less; good quality lumber should be used for the seating part of it. Also, remember to seal it well, or else it may be too light to carry weight. Now, 1×12 slats should be nailed back, in place. Now nail up the 2×4 leg slats. To avoid one’s clothes getting snagged, counter sinking the nail heads can be a good option. To prevent them from rotting, you have to prevent the moisture. Therefore, you can cap the cut ends with 1×6 or 2×6 in the back slat.