A voltage divider is always a _____

by

1 Answer

Answer :

A voltage divider is always a series circuit.

by

Related questions

What is a voltage divider in Arduino?

Description : What is a voltage divider in Arduino?

Last Answer : A voltage divider in Arduino is a circuit that divides a voltage into smaller values using two resistors.

If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Description : If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Last Answer : The ground (reference point) is placed in the proper point in the voltage divider so that positive and negative voltages are supplied

If the source voltage for the voltage divider in question 50 supplies 150 volts, what is the total current through the voltage divider?

Description : If the source voltage for the voltage divider in question 50 supplies 150 volts, what is the total current through the voltage divider?

Last Answer : 495 mA.

If a voltage divider is required for a load that will use 450 mA of current, what should be the value of bleeder current?

Description : If a voltage divider is required for a load that will use 450 mA of current, what should be the value of bleeder current?

Last Answer : 45 mA rule-of-thumb.

What information must be known to determine the component values for a voltage divider?

Description : What information must be known to determine the component values for a voltage divider?

Last Answer : The source voltage and load requirements (voltage and current).

Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Description : Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Last Answer : a)Here R1 and R2 forms voltage divider biasing arrangement. b)voltage drop across R2 ,forward biases the base emitter junction. c)so base current flows and hence collector ... Operating point stabilized against shift in temperature. · Operating point is almost independent of β variation

Voltage divider rule

Description : Voltage divider rule

Last Answer : Voltage divider rule

Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Description : Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Last Answer : Two advantages of voltage divider biasing of BJT. 1. It is very simple method of transistor biasing. 2. The biasing conditions can be very easily set. 3. there is no loading of ... 5. The resistor RE introduces a negative feedback. So all the advantages of negative feedback are obtained. 

The disadvantage of voltage divider bias is that

Description : The disadvantage of voltage divider bias is that  1. it has a high stability factor 2. it has many resistors 3. it allows thermal runaway 4. it does not allow faithful amplification

Last Answer : Is the power off this word only current 

Do you prefer an "open floor plan," or do you prefer some sort of divider between rooms?

Description : Do you prefer an "open floor plan," or do you prefer some sort of divider between rooms?

Last Answer : answer:I love toying with designing my own space and as a former int. design and home staging asst. I have many ideas. Now days after raising a family and being single/divorced for years I prefer an ... apartment soon on a large property and am very excited about how I will set things up. :-)

Is it legal to park at the median divider on Sundays in San Francisco?

Description : Is it legal to park at the median divider on Sundays in San Francisco?

Last Answer : I’m not from San Francisco, but I can’t imagine it would ever be legal to park on a median divider – no matter what day or time it is. People tend to park wherever it’s convenient to them… one parks there and others follow suit.

Plant shelving that could serve as a room divider: what am I talking about?

Description : Plant shelving that could serve as a room divider: what am I talking about?

Last Answer : Etagere?

A variable shunt, connected across the series field coils of a DC compound wound generator, to permit adjustment of the degree of compounding, is called a _____________. A. divider B. diverter C. converter D. rheostat

Description : A variable shunt, connected across the series field coils of a DC compound wound generator, to permit adjustment of the degree of compounding, is called a _____________. A. divider B. diverter C. converter D. rheostat

Last Answer : Answer: B

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Description : Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Last Answer : C. PLL

What is the difference between resistor, rheostat and potential divider?

Description : What is the difference between resistor, rheostat and potential divider?

Last Answer : Resistor: a fixed resistance connected permanently in the circuit for limiting the current to definite value is called the resistor. Rheostat: a variable resistance by sliding contacts on it the current can ... : when a resistance is used to develop a voltage drop it is called a potential divider.

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Last Answer : Star wheel

Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

Current divider rule

Description : Current divider rule

Last Answer : Current divider rule

A potential divider is normally connected _____________.

Last Answer : A potential divider is normally connected outside the generator circuit towards the load circuit.

A 10 bit resistive divider is constructed such that the current through...

Description : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 

Last Answer : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 51.2mA.

State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Description : State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Last Answer : * In an instrumentation system, a transducer is used for sensing various parameters. The output of transducer is an electrical signal proportional to the physical quantity sensed such as pressure, ... monitoring and control 5) Light intensity meter 6) Measurement of flow and thermal conductivity

Which of the following statement is false? Modulation is used to:

Description : Which of the following statement is false? Modulation is used to: (1) Reduce the bandwidth used (2) Separate differing transmissions (3) Ensure that intelligence may be transmitted over long distances (4) Allow the use of practicable antennas

Last Answer : Which of the following statement is false? Modulation is used to: Reduce the bandwidth used

Indicate which one of the following is NOT an advantage of FM over AM?

Description : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Last Answer : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Theoretical bandwidth requirement for FM system is:

Description : Theoretical bandwidth requirement for FM system is: (1) Same as that of the modulating signal bandwidth (2) Twice of modulating signal Bandwidth (3) Thrice as of modulating signal Bandwidth (4) Infinite 

Last Answer : Theoretical bandwidth requirement for FM system is: Infinite

The Ku frequency band used in satellite communication (for uplink and downlink) is:

Description : The Ku frequency band used in satellite communication (for uplink and downlink) is: (1) 14 GHz and 11 GHz (2) 30 GHz and 20 GHz (3) 70 GHz and 50 GHz (4) 60 GHz and 45 GHz 

Last Answer : The Ku frequency band used in satellite communication (for uplink and downlink) is: 14 GHz and 11 GHz 

The disadvantage of CDMA system is:

Description : The disadvantage of CDMA system is: (1) Higher MAI with more user count. (2) That it needs least power consumption. (3) That it needs coherent signal. (4) That it is not suitable with PSK systems 

Last Answer : The disadvantage of CDMA system is: Higher MAI with more user count. 

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle?

Description : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

Last Answer : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

The use of non-uniform quantization leads to:

Description : The use of non-uniform quantization leads to: (1) Reduction in transmission bandwidth. (2) Increase in maximum SNR. (3) Increase in SNR for signal levels. (4) Simplification of quantization process. 

Last Answer : The use of non-uniform quantization leads to:  Increase in SNR for signal levels.

In amplitude modulation AM, if modulation index is more than 100% then:

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

Description : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: (1) 34 and 106 (2) 52 and 88 (3) 106 and 142 (4) 34 and 142

Last Answer : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88

In T1 digital system, the frame synchronization code repeats every

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the

Description : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is

Last Answer : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is 32 Kbits/sec

Principle of Dopper effect is used in

Description : Principle of Doppler effect is used in

Last Answer : Principle of Doppler effect is used in MTI radar and CW Doppler radar

The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Description : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Last Answer : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is 32953 bits/second

A radio transmitter is an equipment:

Description : A radio transmitter is an equipment:

Last Answer : A radio transmitter is an equipment:  for generating modulated radio frequency waves

As the thermal noise get doubled due to the increase in a resistance the noise power get.

Description : As the thermal noise get doubled due to the increase in a resistance the noise power get.  (A) doubled (B) quadruped (C) unchanged (D) halved.

Last Answer : As the thermal noise get doubled due to the increase in a resistance the noise power get. unchanged 

A two cavity klystron tube is a

Description : A two cavity klystron tube is a  (A) velocity modulated tube (B) frequency modulated tube (C) Amplitude modulated tube (D) simple triode

Last Answer : A two cavity klystron tube is a velocity modulated tube

Ionosphere layer of earth is situated at

Description : Ionosphere layer of earth is situated at  (A) upto 18 kms from earth (B) from 18 to 70 km (C) 70 to 500 km (D) above 500 km

Last Answer : Ionosphere layer of earth is situated at 70 to 500 km

Which wave cannot exist inside wave guide

Description : Which wave cannot exist inside wave guide  (A) TE (B) TM (C) TEM (D) HE

Last Answer : Which wave cannot exist inside wave guide TEM 

The frequency range 30MHz - 300MHz is

Description : The frequency range 30MHz - 300MHz is  (A) medium frequency (B) very high frequency (C) super high frequency (D) Infrared frequency

Last Answer : The frequency range 30MHz - 300MHz is very high frequency

The most common device used for detection in radio receivers is

Description : The most common device used for detection in radio receivers is   (A)amplifier (B) triode (C) diode (D) transistor

Last Answer : The most common device used for detection in radio receivers is diode 

In commercial FM broadcasting, the maximum frequency deviation is normally

Description : In commercial FM broadcasting, the maximum frequency deviation is normally   (A) 5 KHz (B) 15 KHz (C) 75 KHz (D) 200 KHz

Last Answer : In commercial FM broadcasting, the maximum frequency deviation is normally 75 KHz

When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the

Description : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is   (A) 0.89159% (B) 8.9159% (C) 89.159% (D) 891.59%

Last Answer : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is 89.159%

A two port network having a 6 dB loss will give

Description : A two port network having a 6 dB loss will give  (A) an output power which is one - quarter of the input power (B) an output power which is one - half of the input power (C) an output voltage which is 0.707 of the input voltage. (D) an output power which is 0.707 of the input power.

Last Answer : A two port network having a 6 dB loss will give an output power which is one - quarter of the input power

When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ

Description : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then   (A) d = 1.5 cm (B) d is less then 1.5 cm (C) d is greater then 1.5 cm (D) d = 3 cm

Last Answer : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then d = 1.5 cm

When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then

Description : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly   (A) 0.19 (B) 0.81 (C) 0.97 (D) 1.19

Last Answer : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly 0.81

In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor

Description : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  (a) > 100 (b) > 500 (c) > 1000 (d) > 20000

Last Answer : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  > 1000

QPSK system is superior to BPSK system because

Description : QPSK system is superior to BPSK system because  (a) its bandwidth is higher than that of BPSK System (b) interchannel interference in QPSK system is less then that in BPSK system (c) bandwidth ... is half of the bandwidth of BPSK system (d) in QPSK system inter-symbol interference is improved

Last Answer : QPSK system is superior to BPSK system because bandwidth of QPSK system is half of the bandwidth of BPSK system 

A radio receiver is placed at one corner of a table and again placed at some other corner of the same table.

Description : A radio receiver is placed at one corner of a table and again placed at some other corner of the same table. Loudspeaker output is changed because  (a) image interference is reduced (b) adjacent channel interference is increased (c) of fading (d) line of sight propagation is not utilized

Last Answer : A radio receiver is placed at one corner of a table and again placed at some other corner of the same table. Loudspeaker output is changed because of fading