Were Can i buy the Best sports equipment's from?

Were Can i buy the Best sports equipment's from?
by

1 Answer

Answer :

can be applied to areas including athlete performance, such as the use of video analysis to fine-tune technique, or to equipment, such as improved running shoes or competitive swimwear
by

Related questions

how do we test pH in soil in a natural and friendly way without the use of modern equipments?

Description : how do we test pH in soil in a natural and friendly way without the use of modern equipments?

Last Answer : Tester are about $39.00..............no other way to know what the PH level is without it.................to send the soil away to be tested is about $25 in our area. PH for watermelon is 6.0-8.0

Where are Power Generating Equipment’s manufactured. -SST 10th

Description : Where are Power Generating Equipment’s manufactured. -SST 10th

Last Answer : They are manufactured at Bhopal by Bharat Heavy Electricals Limited (BHEL).

What are some of the most storage friendly home exercise equipment's?

Description : What are some of the most storage friendly home exercise equipment's?

Last Answer : The best exercise equipment to purchase if you're short on space is a set of free weights. You only need a few sets (unless you plan on breaking through the eventual plateau you'll hit when weight ... much room at all. If weight lifting isn't your style, Pilates bands hardly take up any space.

What equipment's are needed for Tire Repair from the Tire Repair Shop?

Description : What equipment's are needed for Tire Repair from the Tire Repair Shop?

Last Answer : The equipment needed for tire repaired varies from job to job, you would need tools to take the tire off and also sealants and other devices for repair of tire.

What are some top brands for fitness equipments?

Description : What are some top brands for fitness equipments?

Last Answer : Some top brands for fitness equipments would be Cyber International, Hampton, Octane Fitness, Power Plate, Schwinn Fitness, Tuff Stuff, Hoist, Everlast and Humane. These are just to name a few.

A computer programmer A) Does all the thinking for a computer B) Can enter input data quickly C) Can operate all types of computer equipments D) Can draw only flowchart

Description : A computer programmer A) Does all the thinking for a computer B) Can enter input data quickly C) Can operate all types of computer equipments D) Can draw only flowchart

Last Answer : Answer : A

Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Description : Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Last Answer : (2) gross total of all capital assets minus wear and tear Explanation: Capital formation is frequently thought of as a measure of total "investment", in the sense of that portion of ... concept that includes investment in all kinds of capital assets, whether physical property or financial assets.

The definition of 'small-scale industry' in India is based on - (1) sales by the unit (2) Investment In machines and equipments (3) market coverage (4) export capacity

Description : The definition of 'small-scale industry' in India is based on - (1) sales by the unit (2) Investment In machines and equipments (3) market coverage (4) export capacity

Last Answer : (2) Investment In machines and equipments Explanation: Generally, small-scale sector is defined in terms of investment ceilings on the original value of the installed plant and machinery. As per ... -scale and large-scale industries. This limit is being continuously raised up wards by government.

Investment is equal to - (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of these

Description : Investment is equal to - (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of these

Last Answer : (2) gross total of all capital assets minus wear and tear Explanation: Investment" is a broader concept that includes investment in all kinds of capital assets, whether physical property or financial assets. In ... out the loss in capital value of assets used due to wear & tear, obsolescence, etc.

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite

Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Description : Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Last Answer : (C) Jaw crusher

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Last Answer : (C) Sulphuric acid upto 60°C

Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Description : Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Last Answer : (B) Powerful magnets

Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Description : Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Last Answer : (D) Spray towers

Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Description : Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Last Answer : (A) Pachuka tank

Which of the following equipments is not used for liquid dispersion? (A) Wetted wall towers (B) Packed towers (C) Venturi scrubbers (D) Agitated vessels

Description : Which of the following equipments is not used for liquid dispersion? (A) Wetted wall towers (B) Packed towers (C) Venturi scrubbers (D) Agitated vessels

Last Answer : (D) Agitated vessels

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Description : Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Last Answer : (A) The heat transfer rate is low in view of the large temperature drop

Kennedy key is used in (A) Light duty applications (B) Heavy duty applications (C) High speed applications (D) Precision equipments

Description : Kennedy key is used in (A) Light duty applications (B) Heavy duty applications (C) High speed applications (D) Precision equipments

Last Answer : (B) Heavy duty applications

What are the equipments kept inside the hose boxes?

Description : What are the equipments kept inside the hose boxes? 

Last Answer : a. Double female adapter (1 No). b. Delivery hose pipe (50 feet – 2 Nos). c. Branch pipe (1 No). d. Valve wheel (1 No). e. A hose box key (situated in a cabinet at side of hose box). 

Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Description : Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Last Answer : (A) Abundance & high heat capacity

Which one of the following equipments is essentially required for growing microbes on a large scale, for industrial production of enzymes? (a) Bioreactor (b) BOD incubator (c) Sludge digester (d) Industrial oven

Description : Which one of the following equipments is essentially required for growing microbes on a large scale, for industrial production of enzymes? (a) Bioreactor (b) BOD incubator (c) Sludge digester (d) Industrial oven

Last Answer : (a) Bioreactor

The divisional supdt may sanction up to Rs ____ in each case for purchase of equipments and consumables connected with computer and other equipments. a) 400/- b) 1500/- c) 5000/- d) 2500/

Description : The divisional supdt may sanction up to Rs ____ in each case for purchase of equipments and consumables connected with computer and other equipments. a) 400/- b) 1500/- c) 5000/- d) 2500/

Last Answer : c) 5000/

A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Description : A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Last Answer : Does all the thinking for a computer

Heat transfer rate to the stock/charge in the furnace does not depend upon the(A) Emissivity of the refractory walls(B) Size of the furnace(C) Use of waste heat recovery equipments(D) Thickness of the stock

Description : Heat transfer rate to the stock/charge in the furnace does not depend upon the (A) Emissivity of the refractory walls (B) Size of the furnace (C) Use of waste heat recovery equipments (D) Thickness of the stock

Last Answer : (C) Use of waste heat recovery equipments

Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Description : Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Last Answer : (A) Dust catcher (gravity type)

Which of the following is not a source of ozone emission in the atmosphere? (A) Refrigerators (B) Xerox machines (C) Dermatological photo-therapy equipments (D) High voltage electrical equipments

Description : Which of the following is not a source of ozone emission in the atmosphere? (A) Refrigerators (B) Xerox machines (C) Dermatological photo-therapy equipments (D) High voltage electrical equipments

Last Answer : (A) Refrigerators

Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Description : Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Last Answer : (C) Electrostatic precipitator

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Description : 'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Last Answer : 3) Wireless communication between equipments

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Description : 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Last Answer : C) 4.2 to 4.4

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Which of the following is not a current asset of a chemical company? (A) Inventories (B) Marketable securities (C) Chemical equipments (D) None of these

Description : Which of the following is not a current asset of a chemical company? (A) Inventories (B) Marketable securities (C) Chemical equipments (D) None of these

Last Answer : (C) Chemical equipments

Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost (C) Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Description : Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Last Answer : Option B

Amortization' in respect of financial obligation of a company means the (A) Liquidation of financial obligations on instalment basis (B) Commitment of financial obligation on priority (C) Liquidation of all the obsolete equipments of the company (D) Modernisation of the plant equipments

Description : Amortization' in respect of financial obligation of a company means the (A) Liquidation of financial obligations on instalment basis (B) Commitment of financial obligation on priority (C) Liquidation of all the obsolete equipments of the company (D) Modernisation of the plant equipments

Last Answer : Option A

Amortization' in respect of financial obligation of a company means the (A) Liquidation of financial obligations on instalment basis (B) Commitment of financial obligation on priority (C) Liquidation of all the obsolete equipments of the company (D) Modernisation of the plant equipments

Description : Amortization' in respect of financial obligation of a company means the (A) Liquidation of financial obligations on instalment basis (B) Commitment of financial obligation on priority (C) Liquidation of all the obsolete equipments of the company (D) Modernisation of the plant equipments

Last Answer : Option A

Silicon percentage in the silicon steel used for electrical appliances/equipments is (A) 0.3-0.4 (B) 12-14 (C) 3-4 (D) 20-25

Description : Silicon percentage in the silicon steel used for electrical appliances/equipments is (A) 0.3-0.4 (B) 12-14 (C) 3-4 (D) 20-25

Last Answer : Option C

Silicon percentage in silicon steel used for electrical equipments is about (A) 1 (B) 4.0 (C) 8 (D) 14

Description : Silicon percentage in silicon steel used for electrical equipments is about (A) 1 (B) 4.0 (C) 8 (D) 14

Last Answer : Option B

Principle of similitude forms the basis of (A) Comparing two identical equipments (B) Designing models so that the result can be converted to prototypes (C) Comparing similarity between design and actual equipment (D) Hydraulic designs

Description : Principle of similitude forms the basis of (A) Comparing two identical equipments (B) Designing models so that the result can be converted to prototypes (C) Comparing similarity between design and actual equipment (D) Hydraulic designs

Last Answer : Answer: Option B

What are the auxiliary equipments of compressor?

Description : What are the auxiliary equipments of compressor?

Last Answer : Answer: Lube oil consoles, Seal oil consoles, Surface condensers, Condensate pump, Air blowers, Inlet air filters, waste heat system, compressor suction drum, knock out pot, Pulsation dampner, volume bottles, Inter and after coolers.

Name the different types of coal transforming equipments?

Description : Name the different types of coal transforming equipments?

Last Answer : 1. Belt conveyors 2. Screw conveyors 3. Bucket elevators 4. Grab bucket elevators 5. Skip hoists 6. Flight conveyors. The coal transfer starts by carrying of coal from-unloading point to the storage site.

Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Description : Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Last Answer : (A) Instructions by the executive engineers