Consumptive use of Chenopodium album is a). 200 mm b). 550 mm c). 750 mm d). 1000 mm

Consumptive use of Chenopodium album is a). 200 mm b). 550 mm c). 750 mm d). 1000 mm
by

1 Answer

Answer :

b). 550 mm
by

Related questions

A weed accumulate over 550 ppm of Zn in its dry matter a). Digitaria b). Setaria lutescens c). Portulaca d). Chenopodium

Description : A weed accumulate over 550 ppm of Zn in its dry matter a). Digitaria b). Setaria lutescens c). Portulaca d). Chenopodium

Last Answer : b). Setaria lutescens

Growth of the weed is reduced due to root exudates of maize a). Chenopodium album b). Amaranthus retroflexus c). Both a and b d). None of these

Description : Growth of the weed is reduced due to root exudates of maize a). Chenopodium album b). Amaranthus retroflexus c). Both a and b d). None of these

Last Answer : c). Both a and b

Root exudates of which crop has allelo pathic effect on Chenopodium album? a). Wheat b). Oat c). Pea d). All

Description : Root exudates of which crop has allelo pathic effect on Chenopodium album? a). Wheat b). Oat c). Pea d). All

Last Answer : d). All

Consumptive use of wheat is a). 800 mm b). 679 mm c). 979 mm d). 479 mm

Description : Consumptive use of wheat is a). 800 mm b). 679 mm c). 979 mm d). 479 mm

Last Answer : d). 479 mm

Having higher phosphorus content a). Amaranthus b). Setaria c). Chenopodium d). Digitaria

Description : Having higher phosphorus conten a). Amaranthus b). Setaria c). Chenopodium d). Digitaria

Last Answer : d). Digitaria

A potassium lover a). Chenopodium b). Digitaria c). Amaranthus d). Setaria

Description : A potassium lover a). Chenopodium b). Digitaria c). Amaranthus d). Setaria

Last Answer : a). Chenopodium

A nitrophyll a). Amaranthus b). Setaria lutescens c). Digitaria d). Chenopodium

Description : A nitrophyll a). Amaranthus b). Setaria lutescens c). Digitaria d). Chenopodium

Last Answer : a). Amaranthus

November sown berseem crop induces the weed a). Chenopodium sp b). Anagallis sp c). Vicia sp d). All of these

Description : November sown berseem crop induces the weed a). Chenopodium sp b). Anagallis sp c). Vicia sp d). All of these

Last Answer : d). All of these

Established at Hisar in 1968, who was the founder President/Secretary of ISWS a). Amaranthus sp b). Chenopodium c). Circium sp d). All of these

Description : Established at Hisar in 1968, who was the founder President/Secretary of ISWS a). Amaranthus sp b). Chenopodium c). Circium sp d). All of these

Last Answer : d). All of these

Which of the weed accumulates more phosphrous content of over 3%. a). Digitaria b). Amaranthus c). Chenopodium d). Portuluca

Description : Which of the weed accumulates more phosphrous content of over 3%. a). Digitaria b). Amaranthus c). Chenopodium d). Portuluca

Last Answer : a). Digitaria

In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Last Answer : d. D Less than 750 mm

Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm

Description : Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm

Last Answer : [ D ] 750 mm

Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Description : Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Last Answer : Answer : C

Name the winter annual weed from the following? A. Commelina benghalensis B. Boerhavia erecta C. Chenopodium album D. Aternanthera echinata

Description : Name the winter annual weed from the following? A. Commelina benghalensis B. Boerhavia erecta C. Chenopodium album D. Aternanthera echinata

Last Answer : C. Chenopodium album

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

Consumptive use of water( mm/ day) in Maize is (a) 1.0- 2.0 (b) 2.0-3.0 (c) 2.5- 4.3 (d) 4.3- 6.0

Description : Consumptive use of water( mm/ day) in Maize is (a) 1.0- 2.0 (b) 2.0-3.0 (c) 2.5- 4.3 (d) 4.3- 6.0

Last Answer : (c) 2.5- 4.3

In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm

Description : In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm

Last Answer : c) 500 – 750 mm*

Soon to be set up India Post Payments Bank will have how many branches in the country? A) 650 B) 550 C) 500 D) 750 E) 600

Description : Soon to be set up India Post Payments Bank will have how many branches in the country? A) 650 B) 550 C) 500 D) 750 E) 600

Last Answer : A) 650 Explanation: The communications and IT minister Ravi Shankar Prasad has said that all 650 branches of the payment bank set up by the department of posts will be established by September 2017.

A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM

Description : A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM

Last Answer : Answer: C

Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis.(A) 550(B) 750(C) 950(D) 1150

Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150

Last Answer : (C) 950

In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750

Description : In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750

Last Answer : ans 4

The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480

Description : The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480

Last Answer : 1. Rs 550

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Last Answer : (A) 500

If cost of the herbicide is INR 1000 and application cost is INR 500 and net return over weedy is INR 15000, MBCR will be a). 35 b). 25 c). 15 d). 10

Description : If cost of the herbicide is INR 1000 and application cost is INR 500 and net return over weedy is INR 15000, MBCR will be a). 35 b). 25 c). 15 d). 10

Last Answer : d). 10

Weed control index if weed dry weight of a treatment is 200 g/m2 and that of weed check was 600 g/m2 a). 33.3% b). 66.7% c). 25% d). None of these

Description : Weed control index if weed dry weight of a treatment is 200 g/m2 and that of weed check was 600 g/m2 a). 33.3% b). 66.7% c). 25% d). None of these

Last Answer : b). 66.7%

Drift susceptible size of droplets in micron diameter is a). 150-200 b). 200-250 c). <150 d). >250

Description : Drift susceptible size of droplets in micron diameter is a). 150-200 b). 200-250 c). 250

Last Answer : c).

Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Last Answer : (C) 550

The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Last Answer : (C) 500 mm

Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Last Answer : Answer: Option B

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 – 3000 mL (B) Inspiratory reserve (ii) 1100 – 1200 mL volume (C) Expiratory reserve (iii) 500 – 550 mL volume (D) Residual volume (iv) 1000 – 1100 mL (A) (B) (C) (D) (a) (iii) (ii) (i) (iv) (b) (iii) (i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 - 3000 mL (B) Inspiratory reserve (ii) 1100 - 1200 mL volume (C) Expiratory reserve (iii ... i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Last Answer : (b) (iii) (i) (iv) (ii)

Thermal equivalent of electrical power in practical calculation is __________ kcal/kWh. (A) 746 (B) 3000 (C) 1000 (D) 550

Description : Thermal equivalent of electrical power in practical calculation is __________ kcal/kWh. (A) 746 (B) 3000 (C) 1000 (D) 550

Last Answer : (B) 3000

Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Last Answer : a)400-550 rpm

Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Last Answer : a) 400 – 550 rpm

During first six months of lactation, the following increment in energy intake is recommended: (A) 200 kcal/day (B) 300 kcal/day (C) 550 kcal/day (D) 1,000 kcal/day

Description : During first six months of lactation, the following increment in energy intake is recommended: (A) 200 kcal/day (B) 300 kcal/day (C) 550 kcal/day (D) 1,000 kcal/day

Last Answer : Answer : C

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Last Answer : (D) 18.7

The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm

Description : The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm

Last Answer : (B) 600 mm × 750 mm

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be (A) 600 mm (B) 750 mm (C) 900 mm (D) More than 1 m

Description : For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be (A) 600 mm (B) 750 mm (C) 900 mm (D) More than 1 m

Last Answer : Answer: Option B

While placing of concrete the thickness of each layer for R.C.C. is [ A ] 150 to 300 mm [ B ] 450 mm [ C ] 500 to 750 mm [ D ] 500 mm

Description : While placing of concrete the thickness of each layer for R.C.C. is [ A ] 150 to 300 mm [ B ] 450 mm [ C ] 500 to 750 mm [ D ] 500 mm

Last Answer : [ A ] 150 to 300 mm

The size of a plane table is (a) 750mm x 900 mm (b) 600mm x 750 mm* (c) 450mm x 600 mm

Description : The size of a plane table is (a) 750mm x 900 mm (b) 600mm x 750 mm* (c) 450mm x 600 mm

Last Answer : (b) 600mm x 750 mm*

The consumptive use of water is equal to

Description : The consumptive use of water is equal to

Last Answer : Ans.ET + Mw

The percentage of applied irrigation water stored in the soil and made available for consumptive use by the crop

Description : The percentage of applied irrigation water stored in the soil and made available for consumptive use by the crop

Last Answer : Ans.Irrigation Efficiency

The ratio between marketable crop yield and water used in evapotranspiration is known as– 1) Field water use efficiency 2) Economic irrigation efficiency 3) Consumptive use efficiency 4) Water use efficiency

Description : The ratio between marketable crop yield and water used in evapotranspiration is known as– 1) Field water use efficiency 2) Economic irrigation efficiency 3) Consumptive use efficiency 4) Water use efficiency

Last Answer : 1) Field water use efficiency