In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750

1 Answer

Answer :

ans 4


Related questions

Description : Transmission of oil should be changed after every working hours about a) 550 hours b) 650 hours c) 70 hours d) 850 hours

Last Answer : c) 70 hours

Description : Soon to be set up India Post Payments Bank will have how many branches in the country? A) 650 B) 550 C) 500 D) 750 E) 600

Last Answer : A) 650 Explanation: The communications and IT minister Ravi Shankar Prasad has said that all 650 branches of the payment bank set up by the department of posts will be established by September 2017.

Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850

Last Answer : (B) 350 to 450

Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Last Answer : Answer: Option B

Description : The compound interest accrued on an amount of Rs. 25,500 at the end of three years is Rs. 8,440.5.What would be the simple interest accrued on the same amount at the same rate in the same period? a) Rs. 5,450/- b) Rs. 8,750/- c) Rs. 4,350/- d) Rs. 3,650/- e) Rs. 7,650/- 

Last Answer : A = P + Interest = 25500 + 8440.5 = 33940.5 A = P + 1 + (R/100)^3 33940.5 = 25500 a + R/100)^3 a + R/100)^3 = 33940.5 / 25500 a + R/100)^3 = 1.331 a + R/100)^3 = ... R = 10% Simple Interest = Principle Rate Time / 100 = 25500 10 3/100 = 7650 Answer: e)

Description : Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm

Last Answer : [ D ] 750 mm

Description : The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480

Last Answer : 1. Rs 550

Description : Tractor engine oil should be changed and all grease points should be lubricated after every working hrs 1. 15 2. 30 3. 60 4. 120

Last Answer : ans 4

Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Last Answer : (C) 550

Description : Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Last Answer : 1000-1550 oC

Description : A 6 month project in R&D costs____________; while a 12 month project in R&D costs ________. a. 1,000,000; 1,500,000 b. 650,000; 850,000 c. 500,000; 1,000,000 d. 750,000; 1,000,000 e. 1,000,000; 750,000

Last Answer : c. 500,000; 1,000,000

Description : Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Last Answer : Answer : C

Description : A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM

Last Answer : Answer: C

Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150

Last Answer : (C) 950

Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Last Answer : d. D Less than 750 mm

Description : Consumptive use of Chenopodium album is a). 200 mm b). 550 mm c). 750 mm d). 1000 mm

Last Answer : b). 550 mm

Description : What is the electric field intensity at a distance of 20cm from a charge 2 X 10 -6 C in vacuum? a) 250,000 b) 350,000 c) 450,000 d) 550,000

Last Answer : c) 450,000

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Last Answer : (C) 500 mm

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

Description : The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm

Last Answer : (B) 600 mm × 750 mm

Description : 23.98 × 62.49 × 12.03 = ? × 29.97 a) 500 b) 600 c) 900 d) 450 e) 750

Last Answer : 24× 62.5× 12 = ? × 30 24× 750 = ? × 30 ? = (24× 750) / 30 = 600 Answer: b)

Description : While placing of concrete the thickness of each layer for R.C.C. is [ A ] 150 to 300 mm [ B ] 450 mm [ C ] 500 to 750 mm [ D ] 500 mm

Last Answer : [ A ] 150 to 300 mm

Description : In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm

Last Answer : c) 500 – 750 mm*

Description : Under dusty conditions, air cleaner oil is changed after every working hours of a) 6 hours b) 8 hours c) 10 hours d) 12 hours.

Last Answer : c) 10 hours

Description : Engine oil should be changed and replaceable type filters should be changed after even working hours about a) 420 hours b) 320 hours c) 220 hoursd) 120 hours

Last Answer : d) 120 hours

Description : When the engine is operated under average working conditions oil crank case us changed after the operation of about a) 100 hours b) 110 hours c) 115 hours d) 120 hours

Last Answer : d) 120 hours

Description : The cutter bar of a tractor operated on owner makes strokes/min (a) 400 – 500 (b) 500 – 750 (c) 800 – 1200 (d) 1250 – 1500

Last Answer : (c) 800 – 1200

Description : Is the steering gear box the same on a 1954 and a 1956 International 300 tractor?

Last Answer : Yes it is check it out here http://www.hemmings.com/hmn/stories/2008/08/01/hmn_feature37.html

Description : Which of the following is not common transmission line impedance? A. 50 ohms B. 120 ohms C. 75 ohms D. 650 ohms

Last Answer : B. 120 ohms

Description : Which of the following agents and dosage regimens is the best choice of treatment for an asthma patient with rheumatoid arthritis who is considered sensitive to aspirin (experiences bronchospasm with use)? ... once a week (d) Azathioprine, 75 mg daily (e) Cyclophosphamide, 100 mg daily

Last Answer : Ans: C

Description : A man has an Escherichia coli bacteremia with a low-grade fever (101.6°F). Appropriate management of his fever would be (a) Give acetaminophen 650 mg orally every 4 hours (b) Give aspirin 650 ... fever curve to monitor his response to antibiotic therapy (e) Use tepid water baths to reduce the fever

Last Answer : Ans: D

Description : The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4

Last Answer : b. 137.5 cm4

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4

Description : How many kilocalories of heat are required to heat 750 g of water from 35˚C to 55˚C.  a. 15  b. 1500  c. 1.5 x 10^4  d. 6.3 x 10^4

Last Answer : 15

Description : A train starts from Delhi and reaches Lucknow in 24.5 hours. If it travels the first half of journey at 30 kmph and second half at 40 kmph then what is the total distance it travelled? 1) 750 km 2) 800 km 3) 840 km 4) 900 km 5) 920 km

Last Answer : 3) 840 km

Description : CERSAI incorporated with majority share holding of ________ A. Government of India B. National Housing Bank C. Public Sector Banks D. Both (B) and (C) E. (A), (C) and (B)

Last Answer : A. Government of India Explanation: 51% of the equity is owned by the government, and the rest is owned equally by National Housing Bank and 10 other public sector banks.

Description : How many hours of labor to change a power steering hose on a '98 Stratus?

Last Answer : answer:Go to automd.com and enter the details about your car and the work to be done, and your ZIP Code. (I had to select power steering pump replacement from the catalog; I didn't see anything ... (assuming shop labor costs of around $75 per hour, which is in the ballpark). Your mileage may vary.

Description : In accordance with Coast Guard Regulations (46 CFR), a steering gear feeder circuit from the emergency switchboard or alternate power supply must have the capacity for continuous operation of the rudder 15° side to side in not more than 60 seconds for a A. 1/4 hour B. 1/2 hour C. 1 hour D. 2 hours

Last Answer : Answer: B

Description : If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Last Answer : C. 0.219 ft

Description : The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Last Answer : c) 150

Description : The rotavator blade is generally operated at a) 180-320 rpm b) 450-1000 rpm c) 200 – 600 rpm d) None of these Ans. a

Last Answer : ans a

Description : The waste gases coming out from gas turbine exhausts are of the order of: a) 370-540 b) 450 – 700 c) 700- 800 d) 250-440

Last Answer : 370-540

Description : What is the force required to accelerate amass of 30kg at a rate of 15m/s².  a. 460 N  b. 380 N  c. 560 N  d. 450 N F = ma

Last Answer : 450 N

Description : Power Steering Oil?

Last Answer : form_title= Power Steering Oil form_header= Steer with ease when you refile your power steering. When was the last time you checked the steering oil?*= _ [50] What was the last time the steering oil was changed? ... your power steering?*= () Yes () No What steering oil do you normally use?*= _ [50]