A single transistor can be used to build which of the following digital logic gates : -

A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates
by

2 Answers

Answer :

A single transistor can be used to build which of the following digital logic gates : - NOT gates

by

Answer :

a
by

Related questions

A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : -

Description : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - a) AND or OR gates b) XOR or XNOR gates c) NOR or NAND gates d) AND or NOR gates

Last Answer : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - NOR or NAND gates

In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Description : In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Last Answer : a. Digital system

What are the basic digital logic gates?

Description : What are the basic digital logic gates?

Last Answer : The three basic logic gates are • AND gate • OR gate • NOT gate

Which semiconductor device acts like a diode and two transistor : -

Description : Which semiconductor device acts like a diode and two transistor : -  a) SCR b) Triac c) UJT d) Diac

Last Answer : Which semiconductor device acts like a diode and two transistor : - UJT

The basic logic gate whose output is the complement of the input is the: -

Description : The basic logic gate whose output is the complement of the input is the: - a) OR gate b) AND gate c) inverter d) comparator

Last Answer : The basic logic gate whose output is the complement of the input is the: -  inverter

How Many Basic Logic Gates ?

Description : How Many Basic Logic Gates ?

Last Answer : Basic Logic Gate three. OR, AND, NOT

What are the basic logic gates ?

Description : What are the basic logic gates ?

Last Answer : Basic Reasoning Gates. Namely: Or Gate , End Gate and Non Gate.

Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Description : Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Last Answer : Answer: B

How many types of logic gates are there?

Description : How many types of logic gates are there?  

Last Answer : a. OR gate. b. AND gate. c. NAND gate. d. NOR gate. e. Inverter gate. f. Exclusive OR gate. g. Equivalent gate. 

What type of logic gates are added to a parallel adder to enable it to subtract?

Description : What type of logic gates are added to a parallel adder to enable it to subtract?

Last Answer : X-OR gates.

How many logic gates could be contained in lsi?

Description : How many logic gates could be contained in lsi?

Last Answer : 1,000 to 2,000.

The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Description : The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Last Answer : a) Logic gates

Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Description : Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Last Answer : Ans: A Open collector output.

The complete set of only those Logic Gates designated as Universal Gates is

Description : The complete set of only those Logic Gates designated as Universal Gates is  (A) NOT, OR and AND Gates (B) XNOR, NOR and NAND Gates (C) NOR and NAND Gates (D) XOR, NOR and NAND Gates

Last Answer : The complete set of only those Logic Gates designated as Universal Gates is NOR and NAND Gates

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

What are the advantages of TTL (transistor transistor logic)?

Description : What are the advantages of TTL (transistor transistor logic)?

Last Answer : To know about the advantages of TTL logic family, one should have a basic idea about RTL, DTL etc. Diode logic (DL) uses diodes to implement logical functions like AND and OR. But the disadvantage is that it can ... delay offered by them, the logic levels may sometimes change i. e. 0 t0 1 or 1 to 0.

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a...

Description : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D ... Successive Approximation Converter .b) Digital Ramp Converter c) Digital Slope Converter d) All the above

Last Answer : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D converter is : -  Successive Approximation Converter 

We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Description : We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Last Answer : c. set of {AND,OR,NOT}

The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Description : The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Last Answer : (C) EX-OR gate and AND gate

Build using minimum number of CMOS gates.

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

In a single phase induction energy meter, in order to obtain true value of energy, the shunt

Description : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

Last Answer : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by 90o

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

In a household single phase induction type wattmeter, the meter can be reversed by: -

Description :  In a household single phase induction type wattmeter, the meter can be reversed by: - a) reversing the supply terminals b) reversing the load terminal c) opening the meter connection ... opening the meter and reversing the connection of both the potential coil terminals and current coil terminals

Last Answer :  In a household single phase induction type wattmeter, the meter can be reversed by: - opening the meter connection and reversing either the potential coil terminals or current coil terminals 

Why are NAND and NOR gates called digital building blocks?

Description : Why are NAND and NOR gates called digital building blocks?

Last Answer : NAND and NOR gates are called digital building blocks because they are fundamental building blocks for digital circuits. Both NAND and NOR gates are basic logic gates that can be used to construct ... construct any other logic gates and they can be combined and used to create more complex circuits.

Bill Gates will soon be single again. Boys and girls, how are you planning to seduce the man?

Description : Bill Gates will soon be single again. Boys and girls, how are you planning to seduce the man?

Last Answer : If I was such a person, I’d do it with a gun. (Silly question!)

An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Description : An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Last Answer : Answer : D

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : (4) a single transistor Explanation: In digital logic, an inverter or NOT gate is a logic gate which implements logical negation. An inverter circuit outputs a voltage representing the opposite ... be constructed using a single NMOS transistor or a single PMOS transistor coupled with a resistor.

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

_______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Description : _______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Last Answer : a) DRAM

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Last Answer : ANSWER: X -- DIODE

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : a single transistor

What is meant by Logic Level of Digital Signal ?

Description : What is meant by Logic Level of Digital Signal ?

Last Answer : The voltage used to indicate binary '1' and '0' is called logic level.

What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Description : What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Last Answer : Answer: A

One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all inputs and test for a logic '1' at the output C. open all inputs and test for a logic '0' at the output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Description : One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all ... output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Last Answer : Answer: A

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Description : The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Last Answer : Ans: A The digital logic family which has the lowest propagation delay time is ECL (Lowest propagation delay time is possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated).

The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Description : The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Last Answer : (D) CMOS The digital logic family which has minimum power dissipation is CMOS. (CMOS being an unipolar logic family, occupy a very small fraction of silicon Chip area)

What is not true in the context of “Don’t Care Condition” in digital logic ?

Description : What is not true in the context of “Don’t Care Condition” in digital logic ? (A) It corresponds to combination of logic variables whose value is not defined (B) It can be assumed to be 0 or 1 (C) It can be assumed to be 1 only (D) It helps in simplification of logic function

Last Answer : What is not true in the context of “Don’t Care Condition” in digital logic ? (A) It corresponds to combination of logic variables whose value is not defined (B) It can be assumed to be 0 or 1 (C) It can be assumed to be 1 only (D) It helps in simplification of logic function

What should the government do to build a digital Bangladesh ?

Description : What should the government do to build a digital Bangladesh ?

Last Answer : In order to implement the plan that has been adopted to build a digital Bangladesh by 2021, the following is to be done by the government: The use of information technology should be ... technology. In order to get the benefits of information technology, human resources need to be developed.

In a market where companies build close connective relationships where Internet technology will not feature strongly in the development of these relationships, this is known as a ______ relationship. | Digital Marketing Mcqs A.Low Tech, High Touch, Personal B.Low Tech, High Touch Transactional C.High Tech/Low Touch, Automated D.High Tech/Low Touch, Personal Answer: A

Description : In a market where companies build close connective relationships where Internet technology will not feature strongly in the development of these relationships, this is known as a ______ relationship. | Digital ... C.High Tech/Low Touch, Automated D.High Tech/Low Touch, Personal Answer: A

Last Answer : A.Low Tech, High Touch, Personal

Digital evidence alone can be used to build a solid case. a. True b. False

Description : Digital evidence alone can be used to build a solid case. a. True b. False

Last Answer : b. False

Which one of the following frequency meter is suitable for measuring radio frequency?

Description : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Last Answer : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Which of the following factors limit the deflection of the pointer of a PMMC instrument of about

Description : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Last Answer : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4