my main stalk on my dogwood, does not grow straight up. instead it bends over and around why?

my main stalk on my dogwood, does not grow straight up. instead it bends over and around why?
by

1 Answer

Answer :

Need Answer
by

Related questions

A 50 kilogram ice skater glides across the ice in a straight line at 7 meters per second. If she bends down and scoops up a 20 kilogram child standing on the ice, what will be the final speed of the skater and the child? w) 1 meter per second x) 3 meters per second y) 5 meters per second z) 7 meters per second

Description : A 50 kilogram ice skater glides across the ice in a straight line at 7 meters per second. If she bends down and scoops up a 20 kilogram child standing on the ice, what will be the final speed of the skater ... w) 1 meter per second x) 3 meters per second y) 5 meters per second z) 7 meters per second

Last Answer : ANSWER: Y -- 5 METERS PER SECOND

Do bends to drastic degrees in optical fibre reduce signal compared to when it's straight?

Description : Do bends to drastic degrees in optical fibre reduce signal compared to when it's straight?

Last Answer : It’s digital, so there is no such thing as reduced signal. You have signal, or you don’t.

In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Description : In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Last Answer : (iii) ± 0.5 mm in latera

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

does a graft of a dogwood tree grow

Description : does a graft of a dogwood tree grow

Last Answer : Need Answer

how to grow celery from the leftover stalk

Description : how to grow celery from the leftover stalk

Last Answer : when you get down to 2 or 3 inches of celery, just put it into dirt and let it grow on your windowsill..........you can also root it in water and then transplant. Fall is coming so I would keep it inside

my red onion are all stalk very little onion, what can I do tho make the onion grow?

Description : my red onion are all stalk very little onion, what can I do tho make the onion grow?

Last Answer : there usually not ready until the tops start to brown in the fall....then people pull them together and clean them and braid them together and hang them on your front porch.

Light bends around sharp corners as a result of w) refraction x) reflection y) diffraction z) dispersion

Description : Light bends around sharp corners as a result of w) refraction x) reflection y) diffraction z) dispersion

Last Answer : ANSWER: Y -- DIFFRACTION

How do vines 'know' how to wrap themselves around a host stalk or post?

Description : How do vines 'know' how to wrap themselves around a host stalk or post?

Last Answer : We had morning glories that would wrap themselves around other plant using the right hand rule. There were more wraps than days so they plants are not following the sun. Also about one plant in 20 would ... ? I am in the Northern hemisphere so I eagerly await a report from an Aussie on this one.

What is causing my yellow squash plant's main stalk to rot and split open?

Description : What is causing my yellow squash plant's main stalk to rot and split open?

Last Answer : Need Answer

A man carrying a load on his back bends forward because of one of the following reasons: (a) To adjust the centre of gravity of the system such that the vertical line through the centre of gravity passes within the base (b) The man feels lighter because of greater reaction (c) To prevent the load from slipping over and falling down (d) To keep the centre of gravity of the system outside the body

Description : A man carrying a load on his back bends forward because of one of the following reasons: (a) To adjust the centre of gravity of the system such that the vertical line through the centre of gravity ... slipping over and falling down (d) To keep the centre of gravity of the system outside the body

Last Answer : Ans:(a)

My seedlings have very tiny stalks and they tend to fall over. How can I strengthen the stalk?

Description : My seedlings have very tiny stalks and they tend to fall over. How can I strengthen the stalk?

Last Answer : Need Answer

My penis bends slightly up and slightly to the left is this normal?

Description : My penis bends slightly up and slightly to the left is this normal?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

can you cut the long stalk of chicks&hens and make shorter to re-pot.?mine are growing "up" not round and wide?

Description : can you cut the long stalk of chicks&hens and make shorter to re-pot.?mine are growing "up" not round and wide?

Last Answer : Need Answer

What is this hug stalk growing up the center of my rhubarb?

Description : What is this hug stalk growing up the center of my rhubarb?

Last Answer : Yes, you can trim it down, but leave about 3" above ground, and your rhubarbs will survive. -Birdy

Do crabs get "The Bends" when harvested from the ocean floor?

Description : Do crabs get "The Bends" when harvested from the ocean floor?

Last Answer : I think their circulatory systems are different from ours…......

How do you get bends and creases out of leather?

Description : How do you get bends and creases out of leather?

Last Answer : You could take it to a dry cleaners, who would fix it up quite easily I imagine. OR, if you have one, you could use a steamer. Failing that, using a damp towel and an iron on it's lowest setting ... spot first though to be on the safe side and check every few touches to make sure all is well. :)

1. A ray of light travelling in air enters obliquely into water. Does the light ray bends towards the normal or away from the normal? Why? -Physics-10

Description : 1. A ray of light travelling in air enters obliquely into water. Does the light ray bends towards the normal or away from the normal? Why? -Physics-10

Last Answer : The light ray bends towards the normal. When a light ray enters from an optically rarer medium (which has low refractive index) to an optically denser medium (which has a high refractive index), ... denser than air, a ray of light entering from air into water will bend towards the normal.

A tree breaks due to storm and the broken part bends so that the top of the tree touches the ground making an angle 30° with it. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Find the height of the tree. -Maths 9th

Description : A tree breaks due to storm and the broken part bends so that the top of the tree touches the ground making an angle 30° with it. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Find the height of the tree. -Maths 9th

Last Answer : The broken part bends so that the top of the tree touches the ground making an angle 30 °. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Original height of ... After rationalising Now we have , A`BC = AB + BC Take LCM So , original height of tree is

Which tree bends down ?

Last Answer : Shameless self-promotion for Ballistic Products and a great bargain on a neat little knife for you.

What kind of river flows downstream and creates sweeping bends?

Description : What kind of river flows downstream and creates sweeping bends?

Last Answer : Feel Free to Answer

Why can you get the bends?

Description : Why can you get the bends?

Last Answer : The reason you get the bends is because of the nitrogen inside the tank. When you are deep under water the pressure gets higher. If you stay at 20ft for 5 minutes this will release all the nitrogen ... top the nitrogen spews out too quickly which is bad so, when that happens you will get the bends.

Consider the following statements: 1. A pool of water looks shallower than it actually is. 2. Light bends towards the normal while travelling from water to air. Which of the above statements is/are correct? (a) Both (b) None (c) 1 only (d) 2 only

Description : Consider the following statements: 1. A pool of water looks shallower than it actually is. 2. Light bends towards the normal while travelling from water to air. Which of the above statements is/are correct? (a) Both (b) None (c) 1 only (d) 2 only

Last Answer : Ans:(c)

A person climbing a hill bends forward in order to (a) avoid slipping (b) increase speed (c) reduce fatigue (d) increase stability

Description : A person climbing a hill bends forward in order to (a) avoid slipping (b) increase speed (c) reduce fatigue (d) increase stability

Last Answer : Ans:(d)

Climber bends forward while climbing a mountain.

Description : Climber bends forward while climbing a mountain.

Last Answer : 1- Drops his weight forward and uses the gravity effect to get a pull forwards. 2- The weight on the limbs is also lessened, so they get tired a little late then otherwise.

Plant bends towards the source of light on account of the movement of curvature known as?

Description : Plant bends towards the source of light on account of the movement of curvature known as?

Last Answer : phototropism

When a ray passes through a prism ______. A. It goes undeviated B. It remain parallel to a base C. It bends towards the base D. None

Description : When a ray passes through a prism ______. A. It goes undeviated B. It remain parallel to a base C. It bends towards the base D. None

Last Answer : C. It bends towards the base

When a muscle bends one part upon the other, it is called (a) abductor (b) regulator (c) extremor (d) flexor.

Description : When a muscle bends one part upon the other, it is called (a) abductor (b) regulator (c) extremor (d) flexor.

Last Answer : (d) flexor.

When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Description : When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Last Answer : equal to

Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Description : Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Last Answer : (D) None of these

Which of the following pipe bends will incur the largest head loss?(A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Description : Which of the following pipe bends will incur the largest head loss? (A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Last Answer : (A) U-bend

Check valves are used (A) At high pressure (B) In bends (C) For controlling water flow (D) For unidirectional flow

Description : Check valves are used (A) At high pressure (B) In bends (C) For controlling water flow (D) For unidirectional flow

Last Answer : (D) For unidirectional flow

A pressure conduit laid underground, may not be subjected to (A) Internal pressure of water (B) Pressure due to external load (C) Longitudinal temperature stress (D) Longitudinal stresses due to unbalanced pressure to bends

Description : A pressure conduit laid underground, may not be subjected to  (A) Internal pressure of water  (B) Pressure due to external load  (C) Longitudinal temperature stress  (D) Longitudinal stresses due to unbalanced pressure to bends 

Last Answer : (C) Longitudinal temperature stress 

If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these

Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends  to  (A) A circular arc  (B) A parabolic arc  (C) A catenary  (D) None of these 

Last Answer : (A) A circular arc 

If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Description : If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Last Answer : Answer: Option D

the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Description : the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Last Answer : Answer: Option D

While designing hair pin bends on highways, the minimum (A) Designed speed is 20 km/hour(B) Gradient is 1 in 40 (C) Gradient is 1 in 200 (D) All the above

Description : While designing hair pin bends on highways, the minimum (A) Designed speed is 20 km/hour (B) Gradient is 1 in 40 (C) Gradient is 1 in 200 (D) All the above

Last Answer : Answer: Option D

When a number of hair pin bends are introduced, a minimum intervening distance in between is kept (A) 20 m (B) 40 m (C) 60 m (D) 100 m

Description : When a number of hair pin bends are introduced, a minimum intervening distance in between is kept (A) 20 m (B) 40 m (C) 60 m (D) 100 m

Last Answer : Answer: Option C

The minimum design speed for hairpin bends in hill roads is taken as (A) 20 kmph (B) 30 kmph (C) 40 kmph (D) 50 kmph

Description : The minimum design speed for hairpin bends in hill roads is taken as (A) 20 kmph (B) 30 kmph (C) 40 kmph (D) 50 kmph

Last Answer : Answer: Option A

Microbend loss is caused by microscopic bends of the fiber axis. List three sources of microbend loss.

Description : Microbend loss is caused by microscopic bends of the fiber axis. List three sources of microbend loss.

Last Answer : Uneven coating applications, improper cabling procedures, and external force.

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Last Answer : C. constant-radius bending

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation.

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation.

Last Answer : constant-radius bending

When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as the standard refers to minimum forming angle b) The bends should be considered as fail c) New bends should be produced and bent to 180° then re-examined d) They should be rejected as the angle is not close enough to be acceptable

Description : When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as ... then re-examined d) They should be rejected as the angle is not close enough to be acceptable

Last Answer : c) New bends should be produced and bent to 180° then re-examined

Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Last Answer : d) 32mm diameter

When light moves from air to water the ray of light bends ________ the normal. a) away b)towards c)along d)no change

Description : When light moves from air to water the ray of light bends ________ the normal. a) away b)towards c)along d)no change

Last Answer : b)towards

When light enters an optically denser medium, the light ray: w) bends away from a normal to surface x) passes through unbent y) bends towards a normal to surface z) none of the above

Description : When light enters an optically denser medium, the light ray: w) bends away from a normal to surface x) passes through unbent y) bends towards a normal to surface z) none of the above

Last Answer : ANSWER: Y -- BENDS TOWARDS A NORMAL TO SURFACE

The curved body of water formed when a meandering river reshapes and cuts off one of its bends is called: w) an Essing pond x) an Oxbow lake y) a Swensen pool z) a Groovy pool

Description : The curved body of water formed when a meandering river reshapes and cuts off one of its bends is called: w) an Essing pond x) an Oxbow lake y) a Swensen pool z) a Groovy pool

Last Answer : ANSWER: X -- AN OXBOW LAKE

If a scuba diver suffers from the "bends", this means that which gas is being rapidly released from the blood and tissues? w) oxygen x) hydrogen y) nitrogen z) CO2

Description : If a scuba diver suffers from the "bends", this means that which gas is being rapidly released from the blood and tissues? w) oxygen x) hydrogen y) nitrogen z) CO2

Last Answer : ANSWER: Y -- NITROGEN