When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as the standard refers to minimum forming angle b) The bends should be considered as fail c) New bends should be produced and bent to 180° then re-examined d) They should be rejected as the angle is not close enough to be acceptable

When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls  for the sample to have been formed through 180°?  
a) They should be acceptable as the standard refers to minimum forming angle
b) The bends should be considered as fail
c) New bends should be produced and bent to 180° then re-examined
d) They should be rejected as the angle is not close enough to be acceptable
by

1 Answer

Answer :

c) New bends should be produced and bent to 180° then re-examined
by

Related questions

Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Last Answer : d) 32mm diameter

In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Description : In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Last Answer : b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate

The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is (A) Ridge (B) Hip (C) Valley (D) None of these

Description : The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is (A) Ridge (B) Hip (C) Valley (D) None of these

Last Answer : Answer: Option B

The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Description : The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Last Answer : Answer: Option C

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

Which of the following pipe bends will incur the largest head loss?(A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Description : Which of the following pipe bends will incur the largest head loss? (A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Last Answer : (A) U-bend

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Last Answer : C. constant-radius bending

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation.

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation.

Last Answer : constant-radius bending

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

Features to be tested, approach, item pass/fail criteria and test deliverables should be specified in which document? a) Test case specification b) Test procedure specification c) Test plan d) Test design specification

Description : Features to be tested, approach, item pass/fail criteria and test deliverables should be specified in which document? a) Test case specification b) Test procedure specification c) Test plan d) Test design specification

Last Answer : c) Test plan

A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, 50% of the components were rejected. What is the loss to the manufacture? [TCS recruitment exam question] A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Description : A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, ... A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Last Answer : Answer - B. Rs 13,000 Explanation: 5% of 2000=100 so 2000-100=1900 so,if he sells 1900 he will get 25% profit cost per piece rs 25 so 25x 1900 don't solve here if 125% . ... /125=38000=CP if 50% rejected,only 1000 pieces sold so 1000 25=25000=SP loss=cp-sp= 38000-25000=13000

In examining her firm's recently completed market attractiveness - business position model, Jenna Cook finds that the firm's sport sunglasses unit is high on both dimensions. Which one of the following strategies would this placement dictate? A)Invest B)Harvest C)Divest D)Maintain

Description : In examining her firm's recently completed market attractiveness - business position model, Jenna Cook finds that the firm's sport sunglasses unit is high on both dimensions. Which one of the following strategies would this placement dictate? A)Invest B)Harvest C)Divest D)Maintain

Last Answer : A)Invest

IEEE 830-1993 is a IEEE recommended standard for (A) Software requirement specification. (B) Software design. (C) Testing. (D) Both (A) and (B)

Description : IEEE 830-1993 is a IEEE recommended standard for (A) Software requirement specification. (B) Software design. (C) Testing. (D) Both (A) and (B)

Last Answer : (A) Software requirement specification.

Explain why the water molecule has a bent shape and a bond angle less than 109.5°The electron repulsion between the two lone pairs of electrons on the oxygen of water causes the O–H bonds to squeeze close together

Description : Explain why the water molecule has a bent shape and a bond angle less than 109.5° The electron repulsion between the two lone pairs of electrons on the oxygen of water causes the O–H bonds to squeeze close together

Last Answer : The electron repulsion between the two lone pairs of electrons on the oxygen of water causes the O–H bonds to squeeze close together

Compared with other phases of the new product development process, the largest number of new product ideas are rejected during the ______ phase 1. idea generation 2. concept testing 3. business analysis 4. screening5. test marketing

Description : Compared with other phases of the new product development process, the largest number of new product ideas are rejected during the ______ phase 1. idea generation 2. concept testing 3. business analysis 4. screening 5. test marketing

Last Answer : screening

Compared with other phases of the new product development process, the largest number of new -product ideas are rejected during the __________ phase. A)idea generation B)concept testing C)business analysis D)screening E)test marketing

Description : Compared with other phases of the new product development process, the largest number of new -product ideas are rejected during the __________ phase. A)idea generation B)concept testing C)business analysis D)screening E)test marketing

Last Answer : D)screening

Laboratory monitoring of coagulation and anticoagulation includes testing of platelet function. Which of the following statements is/are true concerning tests of platelet function? a. A platelet count of 50,000/µL or more usually ensures hemostasis b. Bleeding time assays assessibility of platelets to perform hemostatic plugs and is determined from a sample of blood drawn in an EDTA coated test tube c. Aspirin therapy can be associated with a bleeding time in the range of 8–15 minutes d. Tests of platelet aggregation should be part of the standard preoperative evaluation of patients using aspirin

Description : Laboratory monitoring of coagulation and anticoagulation includes testing of platelet function. Which of the following statements is/are true concerning tests of platelet function? a. A ... platelet aggregation should be part of the standard preoperative evaluation of patients using aspirin

Last Answer : Answer: a, c Tests of platelet function include peripheral platelet counts, bleeding times, and platelet aggregation. Usually, a platelet count of 50,000/mL or more ensures adequate hemostasis ... is not available in most laboratories, probably because of the observer-dependent nature of the test

Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Description : Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Last Answer : c) Testing

Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Description : Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Last Answer : c) Testing

Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Description : Which of the following is not considered as a risk in project management? a) Specification delays b) Product competition c) Testing d) Staff turnover

Last Answer : c) Testing

Which of the following is not considered as a risk in project management? a. Specification delays b. Product competition c. Testing d. Staff turnover

Description : Which of the following is not considered as a risk in project management? a. Specification delays b. Product competition c. Testing d. Staff turnover

Last Answer : c. Testing

Which of the following statements does not properly describe a limitation of an audit? a. Many audit conclusions are made on the basis of examining a sample of evidence. b. The work, under taken by the auditor is permeated by judgment. c. Fatigue and human weaknesses can cause auditors to overlook pertinent evidence. d. Many financial statement assertions cannot be audited

Description : Which of the following statements does not properly describe a limitation of an audit? a. Many audit conclusions are made on the basis of examining a sample of evidence. b. The ... weaknesses can cause auditors to overlook pertinent evidence. d. Many financial statement assertions cannot be audited

Last Answer : Fatigue and human weaknesses can cause auditors to overlook pertinent evidence

Which of the following statements does not properly describe a limitation of an audit? a. Many financial statement assertions cannot be audited. b. Many audit conclusions are made on the basis of examining a sample of evidence. c. The work, under taken by the auditor is permeated by judgment. d. Fatigue and human weaknesses can cause auditors to overlook pertinent evidence

Description : Which of the following statements does not properly describe a limitation of an audit? a. Many financial statement assertions cannot be audited. b. Many audit conclusions are made on the ... permeated by judgment. d. Fatigue and human weaknesses can cause auditors to overlook pertinent evidence

Last Answer : Fatigue and human weaknesses can cause auditors to overlook pertinent evidence

having one goal or purpose and that must be completed by ……. a) a specific time b) within budget, c) according to specification d) all the above

Description : having one goal or purpose and that must be completed by ……. a) a specific time b) within budget, c) according to specification d) all the above

Last Answer : d) all the above

Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors know how the amounts and disclosures in the financial statements were produced. b. Auditors gathered enough evidence to provide a reasonable basis for forming an opinionc. Auditors give assurance that thefinancial statements are accurate.d. If the evidence allows the auditors to doso, auditors give assurance in the form ofopinion, as to whether the financialstatements taken as a whole are fairlypresented in conformity with GAAP

Description : Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors know how the amounts and disclosures in the financial statements ... as to whether the financial statements taken as a whole are fairly presented in conformity with GAAP

Last Answer : Auditors give assurance that the financial statements are accurate

Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors give assurance that the financial statements are accurate. b. Auditors know how the amounts and disclosures in the financial statements were produced. c. Auditors gathered enough evidence to provide a reasonable basis for forming an opinion. d. If the evidence allows the auditors to doso, auditors give assurance in the form ofopinion, as to whether the financialstatements taken as a whole are fairlypresented in conformity with GAAP

Description : Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors give assurance that the financial statements are accurate. b. ... as to whether the financial statements taken as a whole are fairly presented in conformity with GAAP

Last Answer : Auditors give assurance that the financial statements are accurate

The test -marketing stage: A)is an extension of the screening stage B)should come immediately after business analysis C)ensures that the product will not fail D)is a sample launching of the entire marketing mix

Description : The test-marketing stage: A)is an extension of the screening stage B)should come immediately after business analysis C)ensures that the product will not fail D)is a sample launching of the entire marketing mix

Last Answer : D)is a sample launching of the entire marketing mix

Energy audit refers to the…….. a) Inspecting b) Examining c) Analyzing d) All of the above

Description : Energy audit refers to the…….. a) Inspecting b) Examining c) Analyzing d) All of the above

Last Answer : All of the above

Which of the following in NOT a quantitative test? a) Root bend b) Macro hardness c) Charpy d) Tensile

Description : Which of the following in NOT a quantitative test? a) Root bend b) Macro hardness c) Charpy d) Tensile

Last Answer : a) Root bend

What information should be recorded as a minimum, on a completed production weld? a) Size and type of electrode and b) Welding supervisor’s name c) Welder’s Identification, date and weld number d) Welding inspectors name

Description : What information should be recorded as a minimum, on a completed production weld? a) Size and type of electrode and b) Welding supervisor’s name c) Welder’s Identification, date and weld number d) Welding inspectors name

Last Answer : c) Welder’s Identification, date and weld number

Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Description : Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Last Answer : (B) 5π/2

The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Last Answer : a. Steam

A major reason why a substantial amount of publicity material is rejected by media personnel is that the material is: A)too long and technical. B)written at too high a reading level for the audience. C)submitted by organisations that the media do not trust. D)not persuasive enough. E)insufficiently newsworthy.

Description : A major reason why a substantial amount of publicity material is rejected by media personnel is that the material is: A)too long and technical. B)written at too high a reading level for ... )submitted by organisations that the media do not trust. D)not persuasive enough. E)insufficiently newsworthy.

Last Answer : E)insufficiently newsworthy.

The side AB of a parallelogram ABCD is produced to any point P. A line through A and parallel to CP meets CB produced at Q, then parallelogram PBQR is completed (see figure). -Maths 9th

Description : The side AB of a parallelogram ABCD is produced to any point P. A line through A and parallel to CP meets CB produced at Q, then parallelogram PBQR is completed (see figure). -Maths 9th

Last Answer : Join AC and QP, also it is given that AQ || CP ∴ △ACQ and △APQ are on the same base AQ and lie between the same parallels AQ || CP. ∴ ar(△ACQ) = ar(△APQ) or ar(△ABC) + ar(△ABQ) = ar(△BPQ) + ar(△ABQ) or ar(△ABC) = ar( △BPQ) or 1/2 ar(||gm ABCD) = 1/2 ar(||gm PBQR) or ar(||gm ABCD) = ar(||gm PBQR)

The side AB of a parallelogram ABCD is produced to any point P. A line through A and parallel to CP meets CB produced at Q, then parallelogram PBQR is completed (see figure). -Maths 9th

Description : The side AB of a parallelogram ABCD is produced to any point P. A line through A and parallel to CP meets CB produced at Q, then parallelogram PBQR is completed (see figure). -Maths 9th

Last Answer : Join AC and QP, also it is given that AQ || CP ∴ △ACQ and △APQ are on the same base AQ and lie between the same parallels AQ || CP. ∴ ar(△ACQ) = ar(△APQ) or ar(△ABC) + ar(△ABQ) = ar(△BPQ) + ar(△ABQ) or ar(△ABC) = ar( △BPQ) or 1/2 ar(||gm ABCD) = 1/2 ar(||gm PBQR) or ar(||gm ABCD) = ar(||gm PBQR)

What is an endoscope? (1) It is an optical instrument used to see inside the alimentary canal (2) It is a device which is fitted on the chest of the patient to regularize the irregular heart beats (3) It is an instrument used for examining ear disorders (4) It is an instrument for recording electrical signals produced by human muscles

Description : What is an endoscope? (1) It is an optical instrument used to see inside the alimentary canal (2) It is a device which is fitted on the chest of the patient to regularize the ... used for examining ear disorders (4) It is an instrument for recording electrical signals produced by human muscles

Last Answer : (1) It is an optical instrument used to see inside the alimentary canal Explanation: Endoscopymeans looking inside and typically refers to looking inside the body for medical reasons using ... : breathing disorders; chronic diarrhea; internal bleeding; irritable bowel syndrome; stomach ulcers, etc.

What is an endoscope ? (1) It is an optical instrument used to see inside the alimentary canal (2) It is a device which is fitted on the chest of the patient to regularise the irregular heart beats (3) It is an instrument used for examining ear disorders (4) It is an instrument for recording electrical signals produced by human muscles

Description : What is an endoscope ? (1) It is an optical instrument used to see inside the alimentary canal (2) It is a device which is fitted on the chest of the patient to regularise the ... used for examining ear disorders (4) It is an instrument for recording electrical signals produced by human muscles

Last Answer :  It is an optical instrument used to see inside the alimentary canal

A tree breaks due to storm and the broken part bends so that the top of the tree touches the ground making an angle 30° with it. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Find the height of the tree. -Maths 9th

Description : A tree breaks due to storm and the broken part bends so that the top of the tree touches the ground making an angle 30° with it. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Find the height of the tree. -Maths 9th

Last Answer : The broken part bends so that the top of the tree touches the ground making an angle 30 °. The distance between the foot of the tree to the point where the top touches the ground is 8 m. Original height of ... After rationalising Now we have , A`BC = AB + BC Take LCM So , original height of tree is

When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Description : When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Last Answer : equal to

While designing hair pin bends on highways, the minimum (A) Designed speed is 20 km/hour(B) Gradient is 1 in 40 (C) Gradient is 1 in 200 (D) All the above

Description : While designing hair pin bends on highways, the minimum (A) Designed speed is 20 km/hour (B) Gradient is 1 in 40 (C) Gradient is 1 in 200 (D) All the above

Last Answer : Answer: Option D

When a number of hair pin bends are introduced, a minimum intervening distance in between is kept (A) 20 m (B) 40 m (C) 60 m (D) 100 m

Description : When a number of hair pin bends are introduced, a minimum intervening distance in between is kept (A) 20 m (B) 40 m (C) 60 m (D) 100 m

Last Answer : Answer: Option C

The minimum design speed for hairpin bends in hill roads is taken as (A) 20 kmph (B) 30 kmph (C) 40 kmph (D) 50 kmph

Description : The minimum design speed for hairpin bends in hill roads is taken as (A) 20 kmph (B) 30 kmph (C) 40 kmph (D) 50 kmph

Last Answer : Answer: Option A

Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Description : Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Last Answer : b) Ductile

What is the first stage in software development? A) Specification and design B) Testing C) System Analysis D) Maintenance

Description : What is the first stage in software development? A) Specification and design B) Testing C) System Analysis D) Maintenance

Last Answer : Answer : C

SRS is also known as specification of (A) White box testing (B) Stress testing (C) Integrated testing (D) Black box testing

Description : SRS is also known as specification of (A) White box testing (B) Stress testing (C) Integrated testing (D) Black box testing

Last Answer : (D) Black box testing

Software testing techniques are most effective if applied immediately after (1) requirement specification ...

Description : Software testing techniques are most effective if applied immediately after  (1) requirement specification (2) design (3) coding (4) integration

Last Answer : 1

Which of the following terms refers to a fracture in which one side of a bone is broken and the other side is bent? a) Greenstick A greenstick fracture is a fracture in which one side of a bone is broken and the other side is bent.

Description : Which of the following terms refers to a fracture in which one side of a bone is broken and the other side is bent? a) Greenstick A greenstick fracture is a fracture in which one side of a bone ... tendon and its attachment. d) Oblique An oblique is a fracture occurring at an angle across the bone.

Last Answer : a) Greenstick A greenstick fracture is a fracture in which one side of a bone is broken and the other side is bent.