In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends?  
a) They are easier to produce
b) The testing equipment cannot handle thick root/face bends  
c) Root defects are not important for welder qualification
d) They give more accurate indications
by

1 Answer

Answer :

d) They give more accurate indications
by

Related questions

Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Last Answer : d) 32mm diameter

Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Description : Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Last Answer : d) The workshop humidity

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved qualification to cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Last Answer : a) Never

For ultrasonic testing, which of the following statements is true? a) It is easy to identify all defects b) The equipment shall be calibrated before use c) The equipment cannot be automated d) Sound waves will not travel through copper

Description : For ultrasonic testing, which of the following statements is true? a) It is easy to identify all defects b) The equipment shall be calibrated before use c) The equipment cannot be automated d) Sound waves will not travel through copper

Last Answer : b) The equipment shall be calibrated before use

Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Last Answer : a) The welding engineer

When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as the standard refers to minimum forming angle b) The bends should be considered as fail c) New bends should be produced and bent to 180° then re-examined d) They should be rejected as the angle is not close enough to be acceptable

Description : When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as ... then re-examined d) They should be rejected as the angle is not close enough to be acceptable

Last Answer : c) New bends should be produced and bent to 180° then re-examined

The thermal and electric pulp tests will, A. Give an accurate indications of the pulp status B. The patient’s response will be either pain or no pain C. The patient can differentiate between cold or hot stimuli

Description : The thermal and electric pulp tests will, A. Give an accurate indications of the pulp status B. The patient’s response will be either pain or no pain C. The patient can differentiate between cold or hot stimuli

Last Answer : A. Give an accurate indications of the pulp status

Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Description : Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Last Answer : b) Independent testers see other and different defects and are unbiased.

What is the greatest disadvantage of radiographic inspection? a) the inability to size defects accurately b) The physical size of the equipment c) The skill level of the operator d) The harmful effects of ionizing radiation

Description : What is the greatest disadvantage of radiographic inspection? a) the inability to size defects accurately b) The physical size of the equipment c) The skill level of the operator d) The harmful effects of ionizing radiation

Last Answer : d) The harmful effects of ionizing radiation

If we called them projects instead of problems, would that make them easier to handle?

Description : If we called them projects instead of problems, would that make them easier to handle?

Last Answer : Probably not with cancer but I do agree. : )

Which of the following defects is usually associated with the MAG GMAW) welding process when using Dip Transfer? a) Centerline cracking b) Lack of side wall Fusion c) Undercut d) Tungsten inclusions

Description : Which of the following defects is usually associated with the MAG GMAW) welding process when using Dip Transfer? a) Centerline cracking b) Lack of side wall Fusion c) Undercut d) Tungsten inclusions

Last Answer : b) Lack of side wall Fusion

Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Description : Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Last Answer : d) The client’s inspector or certifying authority

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Description : Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Last Answer : a) The welder and the welding inspector

my main stalk on my dogwood, does not grow straight up. instead it bends over and around why?

Description : my main stalk on my dogwood, does not grow straight up. instead it bends over and around why?

Last Answer : Need Answer

What indications did Washington and his staff recognize that point to the problems that the Continental Army would face as the confrontation with the British continued Use direct quotes from?

Description : What indications did Washington and his staff recognize that point to the problems that the Continental Army would face as the confrontation with the British continued Use direct quotes from?

Last Answer : Need answer

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Last Answer : b) 51.6N/mm2

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Last Answer : b) 25.8N/mm2

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Last Answer : b) 25.8N/mm2

The rolling process cannot be used to produce (A) Plates (B) Rods (C) Tubes (D) Wires

Description : The rolling process cannot be used to produce (A) Plates (B) Rods (C) Tubes (D) Wires

Last Answer : Option C

Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique combinations of conditions and associated results in order to derive unique test cases for validation testing. C. Tools for documenting defects as they are found during testing and for tracking their status through to resolution. D. The most traditional means for analyzing a system or a program

Description : Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique ... their status through to resolution. D. The most traditional means for analyzing a system or a program

Last Answer : A. A metric used to show the logic covered during a test session providing insight to the extent of testing.

Which of the following are considered applications of ultrasonic testing? (A) Determination of elastic constant (B) Detection of defects in metal (C) Measurement of material thickness (D) None of the above

Description : Which of the following are considered applications of ultrasonic testing? (A) Determination of elastic constant (B) Detection of defects in metal (C) Measurement of material thickness (D) None of the above

Last Answer : (B) Detection of defects in metal

At a work site, statistical quality control of concrete means (A) Measurement of risks to eliminate failures (B) Applying the theory' of probability to sample testing or inspection (C) Reduction in wastage of inspection costs (D) Reduction in costs for the removal of defects

Description : At a work site, statistical quality control of concrete means (A) Measurement of risks to eliminate failures (B) Applying the theory' of probability to sample testing or inspection (C) Reduction in wastage of inspection costs (D) Reduction in costs for the removal of defects

Last Answer : (B) Applying the theory' of probability to sample testing or inspection

Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, defects found and fixed iv. The size of the testing Team and skills of the engineers a) iv is correct and i,ii,iii are incorrect b) i,ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Description : Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, ... ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Last Answer : b) i,ii,iii are correct and iv is incorrect

Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the program is defect free. c) The purpose of testing is to demonstrate that the program does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Description : Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the ... does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Last Answer : d) Testing is executing Software for the purpose of finding defects.

Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or unrelated software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Description : Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or ... software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Last Answer : c) Regression Testing

The cost of quality quality is a. An expression of expression of an organizatio organization’s performance in performance in quality in quality in financial terms financial terms b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it. c. A proactive approach proactive approach towards quality towards quality management by management by seeking to seeking to prevent defects prevent defects ever being produced. d. The inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Description : The cost of quality quality is a. An expression of expression of an organizatio organization's performance in performance in quality in quality in financial terms financial terms b. The ... inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Last Answer : b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it.

The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Description : The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Last Answer : D. All of the above

The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Description : The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Last Answer : A. Demonstrate that the application works properly

UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Description : UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Last Answer : A. Data

Which of the following is a myth in testing? a) Tester can find bugs b) Any user can test software c) Missed defects are not due to testers d) Complete testing is not possible

Description : Which of the following is a myth in testing? a) Tester can find bugs b) Any user can test software c) Missed defects are not due to testers d) Complete testing is not possible

Last Answer : Ans : b

Compressibility factor-reduced pressure plot on reduced co-ordinates facilitates (A) Use of only one graph for all gases (B) Covering of wide range (C) Easier plotting (D) More accurate plotting

Description : Compressibility factor-reduced pressure plot on reduced co-ordinates facilitates (A) Use of only one graph for all gases (B) Covering of wide range (C) Easier plotting (D) More accurate plotting

Last Answer : A) Use of only one graph for all gases

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

What is the most important qualification to look for when choosing a food safety training program?

Description : What is the most important qualification to look for when choosing a food safety training program?

Last Answer : If you are looking for a food safety course, with clear instructions, you should probably go to one in person. I feel that learning in person makes it easier to remember what you need to do. It ... state you live in you should check your local health department, they will know where to direct you.

What is the next database upgrade after MS Access cannot handle the amount of data you have to process?

Description : What is the next database upgrade after MS Access cannot handle the amount of data you have to process?

Last Answer : SQL Express I heard was a good option and it is free.

In autosomal recessive inheritance: a. the rarer the trait the higher the possibility of marriages within the same family b. most recessive gene defects cause problem through failure to produce functional protein c. both males and females are affected equally severely d. all above

Description : In autosomal recessive inheritance: a. the rarer the trait the higher the possibility of marriages within the same family b. most recessive gene defects cause problem through failure to produce functional protein c. both males and females are affected equally severely d. all above

Last Answer : all above

What is true about smokers, A. Causes immunosuppression B. Increased redox potential favours growth of anaerobic organisms C. Defects neutrophil function and characteristics D. Can produce smokers palate but rarely metaplasia

Description : What is true about smokers, A. Causes immunosuppression B. Increased redox potential favours growth of anaerobic organisms C. Defects neutrophil function and characteristics D. Can produce smokers palate but rarely metaplasia

Last Answer : A. Causes immunosuppression

Why is it important to question clients to establish any contra-indications uv gel enhancemnts?

Description : Why is it important to question clients to establish any contra-indications uv gel enhancemnts?

Last Answer : Need answer

Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Description : Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Last Answer : a) Intergranular corrosion cracking

With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Description : With which of the following NDE processes is it possible to detect both surface and slight subsurface defects up to 2mm below the surface a) Visual b) Dye Penetrant c) Magnetic Particle using DC d) Magnetic particle using AC

Last Answer : c) Magnetic Particle using DC

The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Description : The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Last Answer : Less power

During root welding, which of the following would be the main cause of excess penetration? a) The root gap is too small in accordance with WPS b) Preheat not used c) The current is too high d) Root face is too large

Description : During root welding, which of the following would be the main cause of excess penetration? a) The root gap is too small in accordance with WPS b) Preheat not used c) The current is too high d) Root face is too large

Last Answer : c) The current is too high

Do you think the fact that I owned my own business for four years would give me some valid qualification for a position as a County Economic Developer?

Description : Do you think the fact that I owned my own business for four years would give me some valid qualification for a position as a County Economic Developer?

Last Answer : Do you want an answer, or validation?

When the contract is perfectly valid in its substance but cannot be enforced because of certain technical defects. This is called a/ an- (a) Unilateral Contract (b) Bilateral Contract (c) Unenforceable Contract (d) Void Contract

Description : When the contract is perfectly valid in its substance but cannot be enforced because of certain technical defects. This is called a/ an- (a) Unilateral Contract (b) Bilateral Contract (c) Unenforceable Contract (d) Void Contract

Last Answer : (c) Unenforceable Contract

CAN GARLIC BE CURED ROOT SIDE UP INSTEAD OF ROOT SIDE DOWN?

Description : CAN GARLIC BE CURED ROOT SIDE UP INSTEAD OF ROOT SIDE DOWN?

Last Answer : Need Answer

Why is it easier to pierce paper with a sharp alpin instead of a blunt alpin ?

Description : Why is it easier to pierce paper with a sharp alpin instead of a blunt alpin ?

Last Answer : The area of the tip of the sharp alpine is smaller than that of the blunt alpine. Therefore, according to the P = F / A formula of pressure, more pressure can be applied to the paper with a ... amount of ball. So it is easier to perforate the paper with a sharp alpin instead of a blunt alpin.

What is the reason behind the adoption of 'GRADE' system instead of our old' MARKS' system? Options: A) It will improve the quality of assessment. B) It will improve teacher student relationship. C) It will eliminate the differentiation between students on marks basis. D) Grading system is easier than marks system.

Description : What is the reason behind the adoption of 'GRADE' system instead of our old' MARKS' system? Options: A) It will improve the quality of assessment. B) It will improve teacher student ... eliminate the differentiation between students on marks basis. D) Grading system is easier than marks system.

Last Answer : C) It will eliminate the differentiation between students on marks basis. 

Is it logical to use plastic plates instead of washing dishes?

Description : Do you think it's a good idea to use plastic cutlery and plates instead of washing dishes?

Last Answer : No. This is stupid, as it only pollutes the environment even more. You better buy a dishwasher.