Pick up reels are very effective in :- a) Cutting of upright crops b) Lifting of lodged (down) crops ahead of cutter bar C) Both (a) and (b) are true d) None of the above

Pick up reels are very effective in :-
 a) Cutting of upright crops  
 b) Lifting of lodged (down) crops ahead of cutter bar
 C) Both (a) and (b) are true
 d) None of the above
by

1 Answer

Answer :

C) Both (a) and (b) are true
by

Related questions

Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Last Answer : a) 400 – 550 rpm

Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Description : Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Last Answer : (d) all of the above

Pods, heads or ears and free seeds, lost during the cutting and conveying operations are called as (a)cylinder loss (b) walker loss (rack loss) (c)shoe losses (d)gathering loss

Description : Pods, heads or ears and free seeds, lost during the cutting and conveying operations are called as (a)cylinder loss (b) walker loss (rack loss) (c)shoe losses (d)gathering loss

Last Answer : (d)gathering loss

ncreased amount of non-grain material on the shoe appreciably______ the shoe loss a) Decreases b) Increases c) Unaltered d) Equal

Description : ncreased amount of non-grain material on the shoe appreciably______ the shoe loss a) Decreases b) Increases c) Unaltered d) Equal

Last Answer : b) Increases

Increasing concave length_______ seed separation at diminishing rate a) Increases b) Decreases c)No effect d) None of the

Description : Increasing concave length_______ seed separation at diminishing rate a) Increases b) Decreases c)No effect d) None of the

Last Answer : a) Increases

For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Description : For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Last Answer : b) cube

Drillability of fertilizer is _______________ proportional to the kinetic energy of repose a) Inversely b) Directly c) Unaffected d) None of these

Description : Drillability of fertilizer is _______________ proportional to the kinetic energy of repose a) Inversely b) Directly c) Unaffected d) None of these

Last Answer : a) Inversely

The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Description : The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Last Answer : C) Reel speed

Free (threshed) seed carried over straw discharge from the rear of shoe is called:- a) Cylinder loss b) Walker losses ( rack loss) C) Shoe loss d) Gathering losses

Description : Free (threshed) seed carried over straw discharge from the rear of shoe is called:- a) Cylinder loss b) Walker losses ( rack loss) C) Shoe loss d) Gathering losses

Last Answer : C) Shoe loss

Free (threshed) seed carried over the Walker or rack in straw and discharge from the rear of machine is called as :- a) Cylinder loss b) Walker losses (rack loss) C) Shoe loss d) Gathering losses

Description : Free (threshed) seed carried over the Walker or rack in straw and discharge from the rear of machine is called as :- a) Cylinder loss b) Walker losses (rack loss) C) Shoe loss d) Gathering losses

Last Answer : b) Walker losses (rack loss)

Unthreshed seed discharge from the rear of the machine either in straw or in the material from the cleaning shoe is called :- a) Cylinder loss b) Walker losses(rack loss) C) Shoe loss d) Gathering losses

Description : Unthreshed seed discharge from the rear of the machine either in straw or in the material from the cleaning shoe is called :- a) Cylinder loss b) Walker losses(rack loss) C) Shoe loss d) Gathering losses

Last Answer : a) Cylinder loss

Flat bat reels are widely used because :- a) This works well in lodged crop b) This is simpler and less expensive than pick up reels C) This works well in upright crops d) Both (b) and (c)

Description : Flat bat reels are widely used because :- a) This works well in lodged crop b) This is simpler and less expensive than pick up reels C) This works well in upright crops d) Both (b) and (c)

Last Answer : d) Both (b) and (c)

Are there any procedures or traditions in your state (or community or country) that you were raised with and are perfectly normal for you...then you realize how strange it might be to outsiders?

Description : Are there any procedures or traditions in your state (or community or country) that you were raised with and are perfectly normal for you...then you realize how strange it might be to outsiders?

Last Answer : I lived for a while in Cairo, Egypt and in the fall they also have burn season . Except they burn garbage. Not grass. The smoke always burned your throat those few months and it was really ... a normal part of my childhood, but now that I think about it, those were really different experiences.

Is anyone on ask-public a modern homesteader?

Description : Is anyone on ask-public a modern homesteader?

Last Answer : I've done quite a bit and have many of the skills- I plan to do a lot more when we move to our 10-acre property in WA state. I can milk a goat, birth and raise goat kids, raise chickens, bake ... , repair lots of things, etc. It's more of a hobby than a necessity, but I enjoy having the skills.

How To Make Instructions On How To Build An Ant Farm

Description : How To Make Instructions On How To Build An Ant Farm

Last Answer : Making an ant farm for your children is an excellent way to hold their attention for hours and is a good educational tool as well. They can teach children the importance of an eco system as well ... have more fun with your ants, you can add minuture trees or tiny farmhouses found at hobby stores.

How to Start a Worm Farm

Description : How to Start a Worm Farm

Last Answer : How to Start a Worm Farm A worm farm is a great way to minimize the waste you and your family produce. Think of it as composting with worms thrown in. Compost produced by worms are ... the exception of fat, meat and dairy products Kitchen waste like peels and leftover vegetables Farm animal manure

How to Start an Ant Farm

Description : How to Start an Ant Farm

Last Answer : How to Start an Ant Farm Watching an ant colony at work is pretty interesting. You'll see the tiny critters at work, moving around the anthill as they bump antennas. Such a sight kills stress while you ... . Good service is all that's needed for a thriving economy - of ants. Enjoy your ant farm!

How to Build a Worm Farm

Description : How to Build a Worm Farm

Last Answer : How to Build a Worm Farm Have you ever thought about building a worm farm? Do you even know why a worm farm can be a great asset to you? Worm farming is a very inexpensive way to use organic ... can see building a worm farm can be both very simple to build and beneficial to you and your garden.

Farm Sprayers

Description : Farm Sprayers

Last Answer : Arguably one of the most important equipments in a modern farm is the farm sprayer. Right up there with the tractors and crop dusters, the farm sprayer makes sure that all pests and weeds that may ... all farm sprayers serve the same function: to ensure that crops are safe and relatively pest-free.

Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Description : Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Last Answer : ans a

is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board

Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section

Last Answer :   <!-- [endif] -->Knife Section

knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Last Answer : a)Increase the co-efficient of friction between crop stalk machine

The cutter bar is set at about to the direction of motion in order to overcome the back-pushing action of the crops. a. 90° with inward lead of 2° c. 92° with inward lead of 2° d. None of above

Description : The cutter bar is set at about to the direction of motion in order to overcome the back-pushing action of the crops. a. 90° with inward lead of 2° c. 92° with inward lead of 2° d. None of above

Last Answer : Ans-         b. 88° with inward lead of 2°  

Alignment of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. b

Description : Alignment of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. b

Last Answer : ans b

Registration of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. a

Description : Registration of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. a

Last Answer : ans a

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

I have a large fabric cutting project to do. I need some type of rotary fabric cutter. Does anyone know which brand is the best?

Description : I have a large fabric cutting project to do. I need some type of rotary fabric cutter. Does anyone know which brand is the best?

Last Answer : I just bought a middle of the road brand.It really is the blade that counts.

Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Description : Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Last Answer : b)20-40m/s

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Description : Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Last Answer : High grade steel

Select the function of Moldboard plough. a) Lifting the soil. c) Pulverizing the soil b) Cutting the furrow slice d) All of the above

Description : Select the function of Moldboard plough. a) Lifting the soil. c) Pulverizing the soil b) Cutting the furrow slice d) All of the above

Last Answer :  All of the above

is the function of mold board plough. a) Cutting the furrow slice b) Lifting the soil c) Pulverizing the soil d) All of the above

Description : is the function of mold board plough. a) Cutting the furrow slice b) Lifting the soil c) Pulverizing the soil d) All of the above

Last Answer : All of the above

The cutter bar of a tractor operated on owner makes strokes/min (a) 400 – 500 (b) 500 – 750 (c) 800 – 1200 (d) 1250 – 1500

Description : The cutter bar of a tractor operated on owner makes strokes/min (a) 400 – 500 (b) 500 – 750 (c) 800 – 1200 (d) 1250 – 1500

Last Answer : (c) 800 – 1200

cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Description : cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Last Answer : ans c

It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Description : It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Last Answer : Ans-    b. shoe

Cutter Bar made of a) Copper b) High Grade Steel c) Cast iron d) None of the above

Description : Cutter Bar made of a) Copper b) High Grade Steel c) Cast iron d) None of the above

Last Answer : High Grade Steel

Play in bearings and worn knife head holders caused due to in cutter bar. A) Pitman B) Breaking of knives. C) Knife head. D) Grass board.

Description : Play in bearings and worn knife head holders caused due to in cutter bar. A) Pitman B) Breaking of knives. C) Knife head. D) Grass board.

Last Answer : Breaking of knives.

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Last Answer : Star wheel

is the length of cutter bar which is recommended as per the standard of design of it. a) 4cm b) 6cm c) 2cm d) 3cm

Description : is the length of cutter bar which is recommended as per the standard of design of it. a) 4cm b) 6cm c) 2cm d) 3cm

Last Answer : 2cm

At what degree does the cutter bar is set for achieving the object ? a) 96 b) 88 c) 69 and half. d) 105

Description : At what degree does the cutter bar is set for achieving the object ? a) 96 b) 88 c) 69 and half. d) 105

Last Answer : 88

is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Description : is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Last Answer : Cutter bar

The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Last Answer : D. Between the two lower Links

The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Last Answer : A. 800-1200 strokes/min

o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Description : o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Last Answer : b) 2.0cm/m

enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Last Answer : (a) 1.5-3.0m

Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Last Answer : a)400-550 rpm

What do you say to someone who has a marble made in China lodged in their head?

Description : What do you say to someone who has a marble made in China lodged in their head?

Last Answer : “Have you lost your marbles?”

What should I do about the splinter lodged deep under my fingernail?

Description : What should I do about the splinter lodged deep under my fingernail?

Last Answer : Raises hand and votes for the doctor option.

If I am on county parole and have caught a new charge and I have been incarcerated with a detainer lodged on me and with two months left on my maximum will they have to drop the detainer on my maxium?

Description : If I am on county parole and have caught a new charge and I have been incarcerated with a detainer lodged on me and with two months left on my maximum will they have to drop the detainer on my maxium?

Last Answer : Regulations differ from jurisdiction to jurisdiction; however,the department is well within their rights to hold you.The "maximum" is for the initial offense. The detainer wasinstituted because you have committed a new crime, thus you can beheld for additional time.

When the addressee of a damaged insured article refuses to take delivery a) The article should be returned to the sender duly protected in a pro bag b) Police complaint to be lodged c) Reported to Divisional office for further order d) Returned to RLO

Description : When the addressee of a damaged insured article refuses to take delivery a) The article should be returned to the sender duly protected in a pro bag b) Police complaint to be lodged c) Reported to Divisional office for further order d) Returned to RLO

Last Answer : a) The article should be returned to the sender duly protected in a pro bag