How to splice an s-video cable to an RCA (composite) cable?

How to splice an s-video cable to an RCA (composite) cable?
by

1 Answer

Answer :

Amazon (and many others, I’m sure) has plenty of cables that should do the trick.
by

Related questions

4 Pin s-video to rca?

Description : 4 Pin s-video to rca?

Last Answer : The connector you need has a s-video on one end and just the yellow connector on the other end. I always keep a few around. I could probably take a picture if you needed. The audio will actually ... do what you are asking. You probably get them both at radio shack. When in doubt, just google it

Where could I find a VGA to RCA cable?

Description : Where could I find a VGA to RCA cable?

Last Answer : There are many companies that produce VGA to RCA cables for systems. Amazon.com, CablesToGo.com, and several other sites make these cables available in bulk and next-day. Radio-Shack carries these cables as well.

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Description : The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Last Answer : a. 0.02 dB

Does the Sony Bravia S Series KDL-32S5100 have RCA inputs on it also?

Description : Does the Sony Bravia S Series KDL-32S5100 have RCA inputs on it also?

Last Answer : The Sony Bravia unfortunately only has USB and VGA inputs.

My RCA 1000w receiver keeps cutting out during movies.

Description : My RCA 1000w receiver keeps cutting out during movies.

Last Answer : Time for a new receiver!

How do I get rid of this stupid icon on my RCA TV/DVD Combo?

Description : How do I get rid of this stupid icon on my RCA TV/DVD Combo?

Last Answer : I always try to turn off and turn on or reboot first to see if that will work. Have you tried that?

I have a RCA 27 inch TruFlat television. Does anyone know the ideal calibration setting are (picture and sound)?

Description : I have a RCA 27 inch TruFlat television. Does anyone know the ideal calibration setting are (picture and sound)?

Last Answer : The whole concept behind calibration is that due to differences in manufacturing and environment each TV set even if it's of the same batch will perform slightly differently. Thus there is no objective ... far away it is from the ideal' neutral value so you can make the appropriate adjustments.

Does anyone have a Rca universal remote control model # rcu704?

Description : Does anyone have a Rca universal remote control model # rcu704?

Last Answer : http://www.thompsontv.com/rcarc.html

Does anyone make RCA Phono -> iPod Connectors?

Description : Does anyone make RCA Phono -> iPod Connectors?

Last Answer : Like this or this?

New RCA 11Maven Pro - 11.6 inch Quad Core What's up?

Last Answer : Here's a very tolerable test that doesn't seem like a bad choice: https://www.youtube.com/watch?v=JFfBh1N186s

how do i connect my rca tablet to my hauwii ascend plus?

Description : how do i connect my rca tablet to my hauwii ascend plus?

Last Answer : Need Answer

How do I plug in a line on RCA Answer machine

Description : How do I plug in a line on RCA Answer machine

Last Answer : Need Answer

What is the purpose of RCA monster cables?

Description : What is the purpose of RCA monster cables?

Last Answer : RCA monster cables are used to connect stero components. The cables feature high resolution, extended frequency response and a wide dynamic range. For additional information: www.cablesforless.com

Will the Dynex Coaxial-to-RCA Connector Adapter work with my 32" RCA Flat Panel TV?

Description : Will the Dynex Coaxial-to-RCA Connector Adapter work with my 32" RCA Flat Panel TV?

Last Answer : Yes, absolutely. Any television with RCA style inputs can be used with this adapter, including LCD's, Plasma, projections, and even CRT.

For how many hours does the RCA DRC8052N DVR record?

Description : For how many hours does the RCA DRC8052N DVR record?

Last Answer : The rCA DRC8052N DVR can hold about 30 hours of sdtv.

Can you use RCA jacks for connecting your computer to your PC?

Description : Can you use RCA jacks for connecting your computer to your PC?

Last Answer : Your computer is your PC, you could use RCA jacks to connect your computer sound to yout tv though.

How do I convert a VGA signal to RCA?

Description : How do I convert a VGA signal to RCA?

Last Answer : You will have to get a VGA and RCA cable. You can connect the VGA cable from your laptop to a VGA/RCA adapter, and the RCA from the adapter to the projector.

Is RCA a good brand for a television ?

Description : Is RCA a good brand for a television ?

Last Answer : RCA is a brand with a long history in television and radio. As such it is highly reputable. Although it no longer makes TVs itself, its brand is used by Sony - who are also a highly regarded manufacturer.

If RCA Records saw all compact disc customers as pretty much alike and thus offered only one marketing mix, it would be using the _________ approach: A)heterogeneous B)undifferentiated C)segmented D)differentiated E)concentrated

Description : If RCA Records saw all compact disc customers as pretty much alike and thus offered only one marketing mix, it would be using the _________ approach: A)heterogeneous B)undifferentiated C)segmented D)differentiated E)concentrated

Last Answer : B)undifferentiated

If RCA developed a new technology that made 3-D imagery possible through the use of videotape played on an advanced television set, it would be more likely to market this innovation if it could obtain a: A)competitive advancement B)patent C)low price advantage D)technological assessment D)technological assessment

Description : If RCA developed a new technology that made 3-D imagery possible through the use of videotape played on an advanced television set, it would be more likely to market this innovation if it could obtain a: A)competitive advancement B)patent C)low price advantage D)technological assessment

Last Answer : B)patent

The modulated picture carrier wave includes the composite video signal as the:

Description : The modulated picture carrier wave includes the composite video signal as the:

Last Answer : Symmetric envelope of amplitude variations

Why all the cut and splice jobs?

Description : Why all the cut and splice jobs?

Last Answer : answer:Do you have an example of a commercial you're talking about? Maybe we can post an example? Commercials have always tended to catch the viewer's eye/attention faster than the traditional programming. What ... in the same (hotel) room. CSI kind of shows, but I believe there are worse examples.

Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Description : Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Last Answer : Do you know this answer yet?

Which of the. following sentences includes a comma splice?

Description : Which of the. following sentences includes a comma splice?

Last Answer : The bakery was closed, it was a Sunday.

A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Description : A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Last Answer : Answer : D

Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Description : Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Last Answer : Answer : C

What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Description : What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Last Answer : a. 0.09dB

Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Description : Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Last Answer : Answer: Option D

Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM. Which of these statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Last Answer : (a) 1 and 3

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

Why are the ends of the wire clamped down after a Western Union splice is made?

Description : Why are the ends of the wire clamped down after a Western Union splice is made?

Last Answer : To prevent damage to the tape insulation.

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

What fiber property directly affects splice loss in fusion splicing?

Description : What fiber property directly affects splice loss in fusion splicing?

Last Answer : The angles and quality of the two fiber-end faces.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Last Answer : c. Optical power meter

How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Description : How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Last Answer : a. 0.1 dB or less

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Description : What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Last Answer : 0.15 dB

What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Last Answer : ∙ b. 0.9 dB

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*

Draw the diagram of Fusion Splice and rigid alignment tube splice.

Description : Draw the diagram of Fusion Splice and rigid alignment tube splice. 

Last Answer : Different types of splicing are: 1. Fusion splicing or welding 2. Mechanical splicing 3. Elastic tube splicing FUSION SPLICING: A fiber join is a type of wield. The fiber ends ... figure below is a unique device that automatically performs lateral, longitudinal and angular alignment. 

An audio video cable for my Laptop?

Description : An audio video cable for my Laptop?

Last Answer : answer:sure you can do this. except, its not just a cord. you have to have a device to convert the signal from VGA. like this: ($69) http://www.newegg.com/Product/Product.aspx?Item=N82E16882196045