When a source is delivering maximum power to a load, the efficiency of the circuit is always

When a source is delivering maximum power to a load, the efficiency of the circuit is always (a) 50% (b) 75% (c) 100% (d) Depends on the circuit parameters
by

1 Answer

Answer :

When a source is delivering maximum power to a load, the efficiency of the circuit is always 50%

by

Related questions

___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Description : ___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Last Answer : A. Psophometer

A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line...

Description : A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line voltage and the line current is? (A) 90° (B) 60° (C) 30° (D) 0° 

Last Answer : A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line voltage and the line current is 30°

In a synchronous generator delivering lagging power factor load

Description : In a synchronous generator delivering lagging power factor load  (1) the excitation emf leads terminal voltage by the power angle (2) the excitation emf lags terminal voltage by the power angle (3) ... by the power factor angle (4) excitation emf lags the terminal voltage by the power factor angle

Last Answer : In a synchronous generator delivering lagging power factor load the excitation emf leads terminal voltage by the power angle

A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of the machine as a motor will be (A) 800 rpm. (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.

Description : A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of ... . (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.

Last Answer : (C) less than 800 rpm.

An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging. For delivering rated...

Description : An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging. For delivering rated current at rated voltage and 0.8 poWer—factor leading, the required excitation will be:  (A) less  (B) more (C) more or less (D) the same

Last Answer : An alternator is delivering rated current at rated voltage and 0.8 power -factor lagging. For delivering rated current at rated voltage and 0.8 power -factor leading, the required excitation will be: more 

A transformer has maximum efficiency at 3/4 full load. The ratio of its iron losses and full load copper loss is : -

Description :  A transformer has maximum efficiency at 3/4 full load. The ratio of its iron losses and full load copper loss is : -  a) 16/9 b) 4 / 3 c) 3/4 d) 9 /16

Last Answer :  A transformer has maximum efficiency at 3/4 full load. The ratio of its iron losses and full load copper loss is : -  9 /16

74)Power transformers are generally designed to have maximum efficiency around A. No load B. Half load C. Near full load D. 10% overload

Description : 74)Power transformers are generally designed to have maximum efficiency around A. No load B. Half load C. Near full load D. 10% overload

Last Answer : C. Near full load

Power transformers should be designed to have maximum efficiency (a) at one-fourth load (b) at one-half load (c) at or near full load (d) any of the above

Description : Power transformers should be designed to have maximum efficiency (a) at one-fourth load (b) at one-half load (c) at or near full load (d) any of the above

Last Answer : (c) at or near full load

A simple phase transformer has a maximum efficiency of 90% at full load and unity power factor. Efficiency at

Description : A simple phase transformer has a maximum efficiency of 90% at full load and unity power factor. Efficiency at half load at the same power factor is  (A) 86.7% (B) 88.26% (C) 88.9% (D) 87.8%

Last Answer : A simple phase transformer has a maximum efficiency of 90% at full load and unity power factor. Efficiency at half load at the same power factor is 87.8%

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is ...

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Last Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

What will be the efficiency when the transformer operates at unity power factor and 60% of full load

Description : What will be the efficiency when the transformer operates at unity power factor and 60% of full load 

Last Answer : What will be the efficiency when the transformer operates at unity power factor and 60% of full load 96.5%

When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Description : When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Last Answer : Answer: A

The total power consumed in a parallel circuit is __________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. always less than the power used in the smallest load C. the sum of the powers used in each individual load D. never more than the power used in the largest load

Description : The total power consumed in a parallel circuit is __________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. always less than the power used in the smallest ... of the powers used in each individual load D. never more than the power used in the largest load

Last Answer : Answer: C

The total power used up in a series circuit is ___________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. the sum of the powers used in each load C. always less than the power used in the smallest load D. never more than the power used in largest load

Description : The total power used up in a series circuit is ___________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. the sum of the powers used in each load C. always less than the power used in the smallest load D. never more than the power used in largest load

Last Answer : Answer: B

An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging case. If it is required to deliver rated current at rated voltage and 0.8 power-factor leading, the required excitation will be (A) less. (B) more. (C) more or less. (D) the same.

Description : An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging case. If it is required to deliver rated current at rated voltage and 0.8 power-factor leading, the required excitation will be (A) less. (B) more. (C) more or less. (D) the same.

Last Answer : Ans: B Over excitation gives leading power factor and under excitation gives lagging p.f .

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

5 The efficiency of a transformer is maximum when A. It runs at half full load B. it runs at full load C. its Cu loss equal iron loss D. it runs over load

Description : 5 The efficiency of a transformer is maximum when A. It runs at half full load B. it runs at full load C. its Cu loss equal iron loss D. it runs over load

Last Answer : C. Its cu loss equal iron loss

For a constant load current, transformer maximum efficiency occurs at

Description : For a constant load current, transformer maximum efficiency occurs at   (a) any power factor (b) zero power factor leading (c) zero power factor lagging (d) unity power factor 

Last Answer : For a constant load current, transformer maximum efficiency occurs at unity power factor 

Generators for peak load plants are usually designed for maximum efficiency at?

Last Answer : Generators for peak load plants are usually designed for maximum efficiency at 50 to 75 percent full load.

An ideal transformer will have maximum efficiency at a load such that?

Last Answer : An ideal transformer will have maximum efficiency at a load such that copper loss equal to iron loss.

For a transformer, operating at constant load current, maximum efficiency will occur at?

Description : For a transformer, operating at constant load current, maximum efficiency will occur at?

Last Answer : For a transformer, operating at constant load current, maximum efficiency will occur at unity power factor.

What condition gives maximum power transfer from the source to the load?

Description : What condition gives maximum power transfer from the source to the load?

Last Answer : When the load resistance equals the source resistance.

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Which power amplifier has maximum efficiency?

Description : Which power amplifier has maximum efficiency? A. Class B B. Class C C. Class A D. all are equally efficient

Last Answer : Class B power amplifier has maximum efficiency.

A transformer operates 24 hours day at full -load. It's full -load efficiency is :

Description : A transformer operates 24 hours day at full -load. It's full -load efficiency is :  (A) equal all day efficiency (B) more than all -day efficiency (C) less than all -day efficiency (D) equal to maximum efficiency

Last Answer : A transformer operates 24 hours day at full -load. It's full -load efficiency is : equal all day efficiency 

A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the...

Description : A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the machine.  (A) 92 kW (B) 150 kW (C) 163 kW (D) 13 kW 

Last Answer : efficiency  -output /input * 100 150/0.92----------163(input) losses-----(163--150)  ---------13kw.

what part of the circuit is the (a) load and (b) source?

Description : what part of the circuit is the (a) load and (b) source?

Last Answer : a) DS1, the flashlight bulb (b) BAT, the dry cell

Give the circuit analysis of current source inverter with resistive load.

Description : Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

Last Answer : Current source inverter (CSI): In current source inverter, the output current is independent of load. The input current of current source inverter is constant. Current source converter converts DC input current to ... are connected in parallel. In CSI diodes are connected in series.

Name the type of rectifier for each of following feature : (i) Highest rectifier efficiency (ii) Highest form factor (iii) Two diode rectifier circuit (iv) PIV = 2Vm.

Description : Name the type of rectifier for each of following feature : (i) Highest rectifier efficiency (ii) Highest form factor (iii) Two diode rectifier circuit (iv) PIV = 2Vm.

Last Answer : (i) Highest rectifier efficiency : Center tapped & Bridge full wave Rectifier  (ii) Highest form factor : Center tapped & Bridge full wave Rectifier  (iii) Two diode rectifier circuit : Center tapped full wave Rectifier  (iv) PIV = 2Vm : Center tapped full wave Rectifier

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

For high efficiency of transfer of power, internal resistance of the source should be?

Description : For high efficiency of transfer of power, internal resistance of the source should be?

Last Answer : For high efficiency of transfer of power, internal resistance of the source should be less than the load resistance.

What is the direction of current through the load resistor in the circuit shown in the illustration? EL-0085 A. Always from point 'Z' to the grounded end. B. Always from the grounded end to point 'Z'. C. It depends on the instantaneous polarity at point 'W'. D. It cannot be determined without a directional ammeter.

Description : What is the direction of current through the load resistor in the circuit shown in the illustration? EL-0085 A. Always from point 'Z' to the grounded end. B. Always from the grounded end to ... on the instantaneous polarity at point 'W'. D. It cannot be determined without a directional ammeter.

Last Answer : Answer: B

The power factor of a D.C. circuit is always?

Description : The power factor of a D.C. circuit is always?

Last Answer : The power factor of a D.C. circuit is always unity.

Am I responsible for lawn damage to a home over 1/4 mile away (1/2 km) caused by a truck delivering construction materials to my house?

Description : Am I responsible for lawn damage to a home over 1/4 mile away (1/2 km) caused by a truck delivering construction materials to my house?

Last Answer : I’d say the truck’s insurance should fix it.

Postal Workers of Reddit, what was the most awkward encounter when you were delivering mail?

Description : Postal Workers of Reddit, what was the most awkward encounter when you were delivering mail?

Last Answer : answer:

When Amazon starts delivering with drones, what will keep the morons in my neighborhood from stealing the drones?

Description : When Amazon starts delivering with drones, what will keep the morons in my neighborhood from stealing the drones?

Last Answer : Every drone has sophisticated accelerometers, sirens, GPS and cameras than the Little Girls room in Ray Moore's house. The drone is in constant contact with the home office and immediately notifies a string of ... the show I'd invest 10 grams of lift capacity and install an RC mine in every one.

It's your worst nightmare. You are standing in front of a crowd of thousands, delivering a speech. Everyone starts laughing loudly. You look down, and uh-oh, what's wrong & how do you react?

Description : It's your worst nightmare. You are standing in front of a crowd of thousands, delivering a speech. Everyone starts laughing loudly. You look down, and uh-oh, what's wrong & how do you react?

Last Answer : answer:That happened once - speaking to a crowd, zipper was open. Nothing hanging out, but still embarrassing. I said excuse me into the mic, turned around, fixed the problem, and moved on. ... happens to everyone it feels terrible to you when it happens, but the audience never remembers a thing.

Moms: Did you get a "push present" after delivering? Everyone else, have you even HEARD of this before?

Description : Moms: Did you get a "push present" after delivering? Everyone else, have you even HEARD of this before?

Last Answer : answer:I think it's something newly made up. I don't remember hearing about these when I had my son back in 2002, but I've heard a lot about them recently. I didn't get one back in 2002 and I ... it. I hadn't even heard of push presents until a few months into my pregnancy (so earlier this year).

What is "the job" of a physician in delivering medical bad news, poor prognosis?

Description : What is "the job" of a physician in delivering medical bad news, poor prognosis?

Last Answer : In my opinion, a physician must be able to deliver any medical news in a professional, simple and sensitive manner because they, in our society, are entrusted with much and are responsible for a ... more should be comfortable with saying I advise you to see another physician for a second opinion'.

If you have someone delivering pizza, is there any reason to not leave a tip?

Description : If you have someone delivering pizza, is there any reason to not leave a tip?

Last Answer : I probably wouldn’t tip with it being that late. But I would give them a call to see what is going on. Maybe your order got lost.

A wealthy man lives alone in a small cottage. Being partially handicapped, he had everything delivered to his cottage. The mailman was delivering a letter one Thursday when he noticed that the front door was ajar. Through the opening, he could see the man's body lying in a pool of dried blood. When a police officer arrived he surveyed the scene. On the porch were two bottles of warm milk, Monday's newspaper, a catalogue, flyers, and unopened mail. The police officer suspects it was foul play. Who does he suspect and why? -Riddles

Description : A wealthy man lives alone in a small cottage. Being partially handicapped, he had everything delivered to his cottage. The mailman was delivering a letter one Thursday when he noticed that the front door ... mail. The police officer suspects it was foul play. Who does he suspect and why? -Riddles

Last Answer : The police officer suspects the newspaper delivery person. The absence of Tuesday's and Wednesday's newspaper indicates that the delivery person knew there was no one there to read it.

(i) …………….. are the means for delivering impersonal communication directed to a vast audience. (Family / Peer groups / Mass media)

Description : (i) …………….. are the means for delivering impersonal communication directed to a vast audience. (Family / Peer groups / Mass media)

Last Answer : Choose the correct alternative and complete the statement : (i) .. are the means ... (Adult socialization / Re-socialization / Socialization)

What is the proper procedure for delivering rescue breaths to an 8-year-old child?

Description : What is the proper procedure for delivering rescue breaths to an 8-year-old child?

Last Answer : Need answer

What is the name of system responsible for transporting and delivering materials needed by the body's organs such as oxygen nutrients and hormones through the blood as it is pumped around the body by?

Description : What is the name of system responsible for transporting and delivering materials needed by the body's organs such as oxygen nutrients and hormones through the blood as it is pumped around the body by?

Last Answer : What is the answer ?

Who is responsible for delivering the situation status update and operational assignment to the TF?

Description : Who is responsible for delivering the situation status update and operational assignment to the TF?

Last Answer : tf

Which means of delivering mail went out of business in 1861 after the completion of the transcontinental telegraph?

Description : Which means of delivering mail went out of business in 1861 after the completion of the transcontinental telegraph?

Last Answer : IK

What is the difference between a folding carton and a corrugated box Which one is better for delivering products?

Description : What is the difference between a folding carton and a corrugated box Which one is better for delivering products?

Last Answer : Folding carton is, no doubt, one of the most secure packaging available all around the world. But it is only famous for its protection abilities but also due to its ability to attract customers in ... with the desired information. A die-cut window can also be created on it to showcase the product.