Reactive power compensation in feeders leads to

Reactive power compensation in feeders leads to

(A) poor voltage profile

(B) improved voltage profile

(C) negative and zero sequence currents

(D) expensive voltage regulators
by

1 Answer

Answer :

Reactive power compensation in feeders leads to improved voltage profile

by

Related questions

State the necessity of reactive power compensation equipment. List out the devices used for reactive power compensation and give application of each device.

Description : State the necessity of reactive power compensation equipment. List out the devices used for reactive power compensation and give application of each device.

Last Answer : Necessity of reactive power compensation equipment :  i. Due to reduction in reactive power flow there is reduction in tr. Line current & reduction in line losses. So to ... 2. Series compensation equipments - Series reactors  3. Synchronous compensation equipments - Synchronous condenser 

Explain reactive power compensation in Transmission and Distribution systems.

Description : Explain reactive power compensation in Transmission and Distribution systems.

Last Answer : Reactive power compensation in Transmission and Distribution systems: The reactive power is present in lines due to the reactive loads and device/ component reactances. This leads to heavy ... Diagram shows a scheme of reactive power compensation used in transmission and distribution systems. 

factors to be considered while designing feeders ?

Description : factors to be considered while designing feeders ? 

Last Answer : Following factors are to be considered while designing the Feeder:  1) Current carrying capacity of conductor:- Conductor should have high current carrying capacity. While voltage drop consideration is ... time consuming.  5) Power Factor of load should be consider while designing

Which of the following statem Which of the following statements are true about an ents are true about anticipation inventory? ticipation inventory? a)Inventory increases during periods of light demand b)Use of anticipation inventory is a reactive alternative to arrive at an acceptable aggregate plan c)Increase in anticipation inventory leads to increases in pipeline inventory d)Both a and b

Description : Which of the following statem Which of the following statements are true about an ents are true about anticipation inventory? ticipation inventory? a)Inventory increases during periods of light demand b ... c)Increase in anticipation inventory leads to increases in pipeline inventory d)Both a and b

Last Answer : d)Both a and b

Is there a way to dissolve spider webs on the centers of humming bird feeders?

Description : Is there a way to dissolve spider webs on the centers of humming bird feeders?

Last Answer : answer:Yep. I flash mine with my Bernzomastic TS4000 torch.nI use the standard green propane canister, not the yellow MAPP gas canister. A quick flash is all it takes. Poof! I also use it to clear out the spider webs that collect on my car. Note: This will also clear out the spider.

How can I attract hummingbirds to come enjoy my newly bought feeders?

Description : How can I attract hummingbirds to come enjoy my newly bought feeders?

Last Answer : answer:Bee Balm aka Monarda can attract hummingbirds (and bees). Here’s a photo of mine, there’s a bee in there if you look closely We had hummingbirds, too, but I never caught them on camera.

Hummingbird feeders and wasps/hornets/bees?

Description : Hummingbird feeders and wasps/hornets/bees?

Last Answer : answer:From http://rubythroat.org, which has solutions for other insects as well, and lists of what not to use: YELLOW JACKETS, WHITE-FACED HORNETS, PAPER WASPS, and other stinging insects sometimes ... feeders by putting out a plate with a small lump of hamburger meat saturated with apple juice.

how can I get rid of wasps that have taken over my hummingbird feeders?

Description : how can I get rid of wasps that have taken over my hummingbird feeders?

Last Answer : when you take one at a time down to clean & fill them, put a little vaseline on each spot where the hummingbirds will feed. The wasps can't land and will go somewhere else.........

Match the column A with the column B `{:(,"(A)",,"(B)"),((a),"Catla",(i),"Bottom feeders"),((b),"Rohu",(ii),"Surface feeders"),((c),"Mrigal",(iii),"Mi

Description : Match the column A with the column B `{:(,"(A)",,"(B)"),((a),"Catla",(i),"Bottom feeders"),((b),"Rohu",(ii),"Surface feeders"),((c),"Mrigal",(iii),"Mi

Last Answer : Match the column A with the column B `{:(,"(A)",,"(B)"),((a),"Catla",(i),"Bottom feeders"),(( ... "),((d),"Fish farming",(iv),"Culture fishers."):}`

Where is it best to locate bird feeders and houses?

Description : Where is it best to locate bird feeders and houses?

Last Answer : Locate bird feeders and houses in several types of locations around the yard to attract different types of birds. Some birds eat 'on the wing' while others prefer to perch an a ledge or eat from ... that the feeders are visible to you from the house so that you can enjoy your feathered visitors!

Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Description : Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Last Answer : a) To avoid relay mal-operation due to CT saturation b) Better sensitivity is got. c) High pickup and TMS avoided in IDMT earth fault relay. 

are the conductors, which connect the consumer's terminals to the distribution (a) Distributors (b) Service mains (c) Feeders (d) None of the above

Description : are the conductors, which connect the consumer's terminals to the distribution (a) Distributors (b) Service mains (c) Feeders (d) None of the above

Last Answer : (b) Service mains

are the conductors, which connect the consumer's terminals to the distribution (a) Distributors (b) Service mains (c) Feeders (d) None of the above

Description : are the conductors, which connect the consumer's terminals to the distribution (a) Distributors (b) Service mains (c) Feeders (d) None of the above

Last Answer : (b) Service mains

How to Make Deer Feeders ?

Description : How to Make Deer Feeders ?

Last Answer : How to Make Deer Feeders How to Make Deer Feeders Building a deer feeder has always been a challenging task, as one requires all of the right materials at the right cost. If you are ... the most basic ways of constructing a deer feeder that allows deer hunters easy feasibility in constructing one.

For the protection of parallel feeders fed from one end, the relays used are:

Description :  For the protection of parallel feeders fed from one end, the relays used are: A) non-directional relays at the source-end and directional relays at the load-end B) non-directional relays at both the ... at the source-end and non-directional at the load-end D) directional relays at both the ends

Last Answer : For the protection of parallel feeders fed from one end, the relays used are: non-directional relays at the source-end and directional relays at the load-end

Define active power and reactive power for RLC series circuit.

Description : Define active power and reactive power for RLC series circuit.

Last Answer : Active Power (P): Active power (P) is given by the product of voltage, current and the cosine of the phase angle between voltage and current.  Unit: watt (W) or kilo-watt (kW) or Mega-watt ... volt-ampere-reactive (VAr), or kilo-volt-ampere-reactive (kVAr) or Mega-voltampere-reactive (MVAr) 

Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Description : Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Last Answer : Reactive power: The reactive power (Q) is defined as the product of voltage(V), current (I) and sine of angle between voltage(V) and current( I) Therefore Reactive power Q = V I ... power so that corrective measures can be taken accordingly to maintain systems power factor near to the unity.

List any two methods of reactive power measurement in 3 phase circuit.

Description : List any two methods of reactive power measurement in 3 phase circuit.

Last Answer : Methods of reactive power measurement in 3 phase circuit: (i) Two single phase wattmeter method (ii) One single phase wattmeter method

In wound rotor alternator, reactive power is maximum at a load angle of

Description : In wound rotor alternator, reactive power is maximum at a load angle of 

Last Answer : In wound rotor alternator, reactive power is maximum at a load angle of 0o

Which of the following is not a source of reactive power?

Description : Which of the following is not a source of reactive power? (A) Generators (B) Reactors (C) Resistors (D) Capacitors

Last Answer : Which of the following is not a source of reactive power? (A) Generators (B) Reactors (C) Resistors (D) Capacitors

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Description : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Last Answer : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is 6 kVAR.

what are the importance of reactive power?

Description : what are the importance of reactive power?

Last Answer : Importance of Reactive Power  Voltage level control is important In power system. Varying reactive power will vary voltage level. Reactive power is directly proportional to ... power for useful work. Reactive power is required to generate magnetic flux.

Draw and explain the temperature compensation circuit in strain-guage.

Description : Draw and explain the temperature compensation circuit in strain-guage. 

Last Answer : Temperature compensation in strain gauge. The resistive type strain gauges are sensitive to temperature so compensation is required which is provided by  1) Use of adjacent arm balancing or compensating gauge 2) ... gauge is introduced in arm 3 which is identical to active gauge. Diagram:-

Explain the need of cold junction compensation.

Description : Explain the need of cold junction compensation.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Describe the following errors and their compensation: (i) Phase error (ii) Speed error

Description : Describe the following errors and their compensation: (i) Phase error (ii) Speed error

Last Answer : (I) Phase error   1. In the phase error the phase difference angle between ∅ & ∅ is kept by using the shading band/ring  2. If the design and location of Shading band/ring is ... of brake magnet. By changing the position of the brake magnet speed of the rotating disc can be controlled. 

List the different errors in wattmeter & explain compensation for it.

Description : List the different errors in wattmeter & explain compensation for it.

Last Answer : Errors in Wattmeter Compensation method Error due to connection method To overcome this error, wattmeters are provided with additional compensating winding which is connected in series with ... due to friction The weight of moving system be reduced to minimum possible.

List any four errors in induction type energy meter. Give method of compensation for each.

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Draw a neat labeled diagram of Automatic Weight Tensioning and Temperature Compensation and give any two advantages of the same.

Description : Draw a neat labeled diagram of Automatic Weight Tensioning and Temperature Compensation and give any two advantages of the same.

Last Answer :  figure of automatic weight tensioning Advantages of automatic weight tensioning and temperature compensation:  Sparkless current collection at higher speeds.  OHE becomes more dynamically ... of unregulated OHE.  Because of fixed tension, fluctuations in the height are minimized

Load compensation in power systems is a process to :

Description : Load compensation in power systems is a process to :  (A) Maintain better voltage profile (B) Increase short circuit capacity of the system (C) Generate required harmonics for loads like arc furnaces (D) Compensate for the line reactance

Last Answer : Load compensation in power systems is a process to : Maintain better voltage profile

why reactive ohm cannot converted electrical energy into heat?

Description : why reactive ohm cannot converted electrical energy into heat?

Last Answer : Because it describes the resistance of element that store energy rather than dissipate energy as heat

The voltage phasor of a circuit is 10 ∠15° V and the current phasor is 2∠–45° A. The active and reactive...

Description : The voltage phasor of a circuit is 10 ∠15° V and the current phasor is 2∠–45° A. The active and reactive powers in the circuit are   (a) 20 2 W and 10 2 VAR (b) 10 W and 10 3 VAR (c) 5 W and 5 3 VAR (d) 10 3 W and – 10 VAR 

Last Answer : Angle between voltage and current ¢=15-(-45)=60° Cos60°=1/2  Active power =vicos¢=10×2×1/2=10watt Reactive power=visin¢=10×2×sin60°=20×√3/2=10√3

What is Reactive Power ?

Description : What is Reactive Power ?

Last Answer : The product of the voltage of the AC circuit and the product of the reactive current or the vertical component of the current is called reactive power.

As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Description : As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Last Answer : Answer: D

The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Description : The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Last Answer : Answer: B

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Description : Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Last Answer : Answer: A

The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Description : The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Last Answer : Answer: D

What will be the reactive power and bus voltage whan the generator bus is treated as load bus.

Description : What will be the reactive power and bus voltage whan the generator bus is treated as load bus.

Last Answer : When the generator bus is treated as load bus, the reactive power of the bus is equated to the limit it has violated, and the previous iteration value of bus voltage is used for calculating current iteration value.

What is purpose of reactive power (VAR)?

Description : What is purpose of reactive power (VAR)?  

Last Answer : It is an energy required to built up magnetic field to drive the power.  

Illustrate how can you use a single-phase wattmeter to measure 3 phase reactive power in a circuit?

Description : Illustrate how can you use a single-phase wattmeter to measure 3 phase reactive power in a circuit?

Last Answer : We can measure reactive power of 3 phase circuit by dingle phase wattmeter by connecting the current coil in series with a line or load and connecting the pressure coil across the other two lines.  Reactive power = 3√ V * I * sinϕ Watts. 

Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Description : Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Last Answer : Real Power: It is the product of voltage, current and power factor i.e. P = V I cos j and basic unit of real power is watt. i.e. Expressed as W or kW. Apparent power: It is the product of ... X current X sinj or Reactive power = V I sin j and has no other unit but expressed in VAR or KVAR.

The voltage of a particular bus can be controlled by controlling the a) Active power of the bus b) Reactive power of the bus c) Phase angle d) All of the above

Description : The voltage of a particular bus can be controlled by controlling the a) Active power of the bus b) Reactive power of the bus c) Phase angle d) All of the above

Last Answer : b) Reactive power of the bus

In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Description : In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Last Answer : d) Constant real and reactive power drawn from the bus

In power system, if a voltage controlled bus is treated as a load bus then which one of the following limits would be violated? a) Voltage b) Active power c) reactive power d) Phase angle

Description : In power system, if a voltage controlled bus is treated as a load bus then which one of the following limits would be violated? a) Voltage b) Active power c) reactive power d) Phase angle

Last Answer : a) Voltage

In load flow studies of a power system, a voltage control bus is specified by a) Real power and reactive power b) Reactive power and voltage magnitude c) Voltage and voltage phase angle d) Real power and voltage magnitude

Description : In load flow studies of a power system, a voltage control bus is specified by a) Real power and reactive power b) Reactive power and voltage magnitude c) Voltage and voltage phase angle d) Real power and voltage magnitude

Last Answer : d) Real power and voltage magnitude

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage

What is the formula for calculating reactive power?

Description : What is the formula for calculating reactive power?

Last Answer : Reactive Power = (IX)2X