What is TRUE: A. Boiling point of acrylic acid > boiling point of water B. Boiling point of acrylic acid is similar to that of water C. Boiling point of acrylic acid < boiling point of water

What is TRUE:
A. Boiling point of acrylic acid > boiling point of water
B. Boiling point of acrylic acid is similar to that of water
C. Boiling point of acrylic acid < boiling point of water
by

1 Answer

Answer :

B. Boiling point of acrylic acid is similar to that of water
by

Related questions

Porosity in acrylic dentures is caused by, A. Contraction porosity in thickest point of the denture B. Insufficient pressure during flasking

Description : Porosity in acrylic dentures is caused by,  A. Contraction porosity in thickest point of the denture  B. Insufficient pressure during flasking 

Last Answer : A. Contraction porosity in thickest point of the denture  B. Insufficient pressure during flasking 

How long should acrylic self-cure special trays been made prior to taking impression: A. 12 hrs B. Immediately after fabricating it C. After been left in water for an hour D. Wait for an hour before pouring

Description : How long should acrylic self-cure special trays been made prior to taking impression: A. 12 hrs B. Immediately after fabricating it C. After been left in water for an hour D. Wait for an hour before pouring

Last Answer : A. 12 hrs

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Self polymerising acrylic resins differ from heat cured resins because they exhibit: A. Higher molecules weight B. Higher content of residual monomers

Description : Self polymerising acrylic resins differ from heat cured resins because they exhibit: A. Higher molecules weight B. Higher content of residual monomers

Last Answer : B. Higher content of residual monomers

Tissue conditioning materials: (Silicon lining materials) A. are more resilient than plastic acrylic B. can minimise any bacterial colonies

Description : Tissue conditioning materials: (Silicon lining materials) A. are more resilient than plastic acrylic B. can minimise any bacterial colonies

Last Answer : A. are more resilient than plastic acrylic

Which of the following procedures will not achieve sterilization: A. Hot air at 160ºC for 90mins B. Boiling water at 100ºC for 2 hours C. Autoclave at 121ºC under 15psi for 20 mins D. Dry heat at 177ºC for 60mins E. All of the above will achieve sterilisation

Description : Which of the following procedures will not achieve sterilization: A. Hot air at 160ºC for 90mins B. Boiling water at 100ºC for 2 hours C. Autoclave at 121ºC under 15psi for 20 mins D. Dry heat at 177ºC for 60mins E. All of the above will achieve sterilisation

Last Answer : B. Boiling water at 100ºC for 2 hours

As far as localised alveolar osteitis is concerned; which one of the following is true? A. The incidence in the mandible and maxilla is similar B. The prophylactic prescription of antibiotics prior to extraction reduces the incidence. C. Excessive fibrinolysis is the likely aetiology D. Purulent exudate must be seen for a diagnosis and irrigation is mandatory E. Zn oxide eugenol and alvogyl dressing promote a rapid bone growth

Description : As far as localised alveolar osteitis is concerned; which one of the following is true? A. The incidence in the mandible and maxilla is similar B. The prophylactic prescription of antibiotics ... and irrigation is mandatory E. Zn oxide eugenol and alvogyl dressing promote a rapid bone growth

Last Answer : C. Excessive fibrinolysis is the likely aetiology

As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic prescription of antibiotics prior to extraction reduces the incidence. C. Excessive fibrinolysis is the likely aetiology D. Purulent exudate must be seen for a diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth

Description : As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic ... diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth

Last Answer : C. Excessive fibrinolysis is the likely aetiology

Which of the following is TRUE in regard to high risk patient?** A. 0.1ml of blood from Hepatitis B carrier is less infective than 0.1ml of blood from HIV patient B. 0.1ml of blood from Hepatitis B carrier is more infective than 0.1ml of blood from HIV patient C. Level of virus are similar in the blood and saliva of HIV patient D. Level of virus in the saliva is not significant for Hepatitis B patient E. The presence of Hepatitis B core Antigen in the blood means that active disease is not present

Description : Which of the following is TRUE in regard to high risk patient?** A. 0.1ml of blood from Hepatitis B carrier is less infective than 0.1ml of blood from HIV patient B. 0.1ml of blood from ... B patient E. The presence of Hepatitis B core Antigen in the blood means that active disease is not present

Last Answer : B carrier is more infective than 0.1ml of blood from HIV patient C. Level of virus are similar in the blood and saliva of HIV patient

The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Description : The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Last Answer : b. Chemical sterilisation.

The sterilisation of Gutta Percha is achieved by: A. Heat B. Chemical sterilisation C. Flame D. Boiling E. Autoclave

Description : The sterilisation of Gutta Percha is achieved by:  A. Heat  B. Chemical sterilisation  C. Flame  D. Boiling  E. Autoclave 

Last Answer : B. Chemical sterilisation 

Consider a small aliphatic 1° amine, 1° alcohol, ester, carboxylic acid, and amide, all of similar molecular weight. Which one is most likely to have thehighest boiling point?(a) The amide(b) The alcohol(c) The ester(d) The carboxylic acid

Description : Consider a small aliphatic 1° amine, 1° alcohol, ester, carboxylic acid, and amide, all of similar molecular weight. Which one is most likely to have the highest boiling point? (a) The amide (b) The alcohol (c) The ester (d) The carboxylic acid

Last Answer : The amide

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

Patient on anti-coagulant therapy requires an extraction to be performed. Which of the following is NOT true: A. Minor post operative bleedings can be reduced somehow by using tranexamic acid B. Prothrombin value (INR) of 3 is enough to perform extraction C. It takes at least 8 hours for heparin to take effects D. Heparin should be administered sub-cutaneous

Description : Patient on anti-coagulant therapy requires an extraction to be performed. Which of the following is NOT true: A. Minor post operative bleedings can be reduced somehow by using tranexamic acid B. ... takes at least 8 hours for heparin to take effects D. Heparin should be administered sub-cutaneous

Last Answer : C. It takes at least 8 hours for heparin to take effects

When glycine is heated, it forms (a) Diketopiperazine (b) Acrylic acid (c) Butyric acid (d) Butyrlactam

Description : When glycine is heated, it forms (a) Diketopiperazine (b) Acrylic acid (c) Butyric acid (d) Butyrlactam

Last Answer : Diketopiperazine

To be effective in ulcerative colitis, 5-aminosalicylic acid has to be given as: A. Acrylic polymer coated tablet which releases the drug only in the lower bowel B. A complex of two molecules joined together by azo bond C. A retention enema D. Any of the above ways

Description : To be effective in ulcerative colitis, 5-aminosalicylic acid has to be given as: A. Acrylic polymer coated tablet which releases the drug only in the lower bowel B. A complex of two molecules joined together by azo bond C. A retention enema D. Any of the above ways

Last Answer : D. Any of the above ways

What element probably has a boiling point most and least similar to the boiling point of calcium?

Description : What element probably has a boiling point most and least similar to the boiling point of calcium?

Last Answer : This element is strontium (Sr).

Which compound has the highest boiling point? 1. CH3CH2CH3 2. CH3CH2OH 3. CH3CH2NH2 (a) 1 (b) 2 (c) 3 (d) 2 and 3 have similar boiling points

Description : Which compound has the highest boiling point? 1. CH3CH2CH3 2. CH3CH2OH 3. CH3CH2NH2 (a) 1 (b) 2 (c) 3 (d) 2 and 3 have similar boiling points

Last Answer : 2

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

.What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%

Description : .What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%

Last Answer : a . 37% of phosphoric acid in water.

The best method of cleaning and toilet cavity: A. Alcohol B. Citric acid C. Water D. Organic acid

Description : The best method of cleaning and toilet cavity: A. Alcohol B. Citric acid C. Water D. Organic acid

Last Answer : D. Organic acid

Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Last Answer : A. Clean with pumice, rubber cup, water and weak acid

Etching a hybrid glass ionomer-composite a. is necessary for composite resin bonding b. is not necessary for composite resin bonding c. is necessary for adding a glass ionomer cement for repair d. is not necessary for adding a glass ionomer cement for repair e. a 3-5 second etch with 10% phosphoric acid is recommended

Description : Etching a hybrid glass ionomer-composite a. is necessary for composite resin bonding b. is not necessary for composite resin bonding c. is necessary for adding a glass ionomer cement for repair ... glass ionomer cement for repair e. a 3-5 second etch with 10% phosphoric acid is recommended

Last Answer : b. is not necessary for composite resin bonding

What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Description : What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Last Answer : c. 10 - 15% carbamide peroxide

Why is the frequency of carbohydrate intake more important than the quantity: A. Low number of streptococcus mutans B. Hetero formation is better at low sugar concentration C. Homo formation is better at high sugar intake D. Restricted diffusion of acid through plaque

Description : Why is the frequency of carbohydrate intake more important than the quantity: A. Low number of streptococcus mutans B. Hetero formation is better at low sugar concentration C. Homo formation is better at high sugar intake D. Restricted diffusion of acid through plaque

Last Answer : D. Restricted diffusion of acid through plaque

The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Description : The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Last Answer : C. The chemical and physical nature of the tooth

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

Which of the following penicillins are readily destructed by stomach acid: A. Methicillin B. Cloxacillin C. Phenoxy methyl D. Penicillin G

Description : Which of the following penicillins are readily destructed by stomach acid: A. Methicillin B. Cloxacillin C. Phenoxy methyl D. Penicillin G

Last Answer : D. Penicillin G

A patient has a small incisal fracture of the maxillary incisor. Which is the best material to resist fracture at the acid etched tooth composite interface: A. Micro-filled composite B. Hybrid composite C. GIC D. Silicate

Description : A patient has a small incisal fracture of the maxillary incisor. Which is the best material to resist fracture at the acid etched tooth composite interface: A. Micro-filled composite B. Hybrid composite C. GIC D. Silicate

Last Answer : B. Hybrid composite

How can you improve the adhesion of a fissure sealant: A. Acid etching technique

Description : How can you improve the adhesion of a fissure sealant: A. Acid etching technique

Last Answer : A. Acid etching technique

Several applications have been suggested to increase the effectiveness of prophylactic application of topical fluoride which include all EXCEPT: A. Increase Fluoride ions in solution “increase concentration” B. Increase PH of fluoride C. Increase exposure time to topical fluoride D. Pre-treat enamel with 0.5% phosphoric acid E. Use NH4F instead of NaF

Description : Several applications have been suggested to increase the effectiveness of prophylactic application of topical fluoride which include all EXCEPT: A. Increase Fluoride ions in solution increase concentration B. Increase ... D. Pre-treat enamel with 0.5% phosphoric acid E. Use NH4F instead of NaF

Last Answer : B. Increase PH of fluoride

With dentin bonding agent, you apply: A. First acid etching to dentine and then bonding agent B. Bonding agent directly to dentine C. Chelating agent (EDTA) and bonding agent

Description : With dentin bonding agent, you apply: A. First acid etching to dentine and then bonding agent B. Bonding agent directly to dentine C. Chelating agent (EDTA) and bonding agent

Last Answer : A. First acid etching to dentine and then bonding agent

lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Description : lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Last Answer : A. Acid-Base reaction

When taking Mono Amino Oxidase Inhibitors (MAOI); which drugs are contra indicated: I. Barbiturate II. Local anaesthetic III. Pethidine IV. Acetyl salicylic acid A. All of the above B. None of the above C. I, II and III D. II, III and IV

Description : When taking Mono Amino Oxidase Inhibitors (MAOI); which drugs are contra indicated: I. Barbiturate II. Local anaesthetic III. Pethidine IV. Acetyl salicylic acid A. All of the above B. None of the above C. I, II and III D. II, III and IV

Last Answer : C. I, II and III

Drugs contraindicated with Monoaminoxidase Inhibitors (MAOI):VERY IMP AND CONTROVERSIAL QUESTION A. Barbiturates B. Pethidine C. Local Anaesthesia with felypressin D. Narcotic analgetics E. Salicylic acid

Description : Drugs contraindicated with Monoaminoxidase Inhibitors (MAOI):VERY IMP AND CONTROVERSIAL QUESTION A. Barbiturates B. Pethidine C. Local Anaesthesia with felypressin D. Narcotic analgetics E. Salicylic acid

Last Answer : B. Pethidine

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of fluoride in solutions B. Raise the PH of the fluoride solution C. Increase the exposure time to topical fluoride D. Pre-treat the enamel with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Description : Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of ... with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Last Answer : B. Raise the PH of the fluoride solution

Trichloroacetic acid, a strong acid, has been used by dentists for chemical cautery of hypertrophic tissue and aphthous ulcers; its mechanism of action is, BOUCHERS P 194 A. Thermodynamic action B. Activation of tissue enzymes C. Osmotic pressure D. Protein precipitation (PPT) E. Neutralization

Description : Trichloroacetic acid, a strong acid, has been used by dentists for chemical cautery of hypertrophic tissue and aphthous ulcers; its mechanism of action is, BOUCHERS P 194 A. Thermodynamic ... Activation of tissue enzymes C. Osmotic pressure D. Protein precipitation (PPT) E. Neutralization

Last Answer : D. Protein precipitation (PPT)

The best way to clean a cavity before the placement of GIC is,** A. H2O2 B. Phosphoric Acid C. Polyacrylic acid 10% sturdavent 563pag

Description : The best way to clean a cavity before the placement of GIC is,** A. H2O2 B. Phosphoric Acid C. Polyacrylic acid 10% sturdavent 563pag

Last Answer : C. Polyacrylic acid 10% sturdavent 563pag

What is NOT TRUE about Hydrotherapy (Water Jet): A. Removes pellicle from tooth surface B. Removes dental plaque C. Causes no harm to gingiva

Description : What is NOT TRUE about Hydrotherapy (Water Jet): A. Removes pellicle from tooth surface B. Removes dental plaque C. Causes no harm to gingiva

Last Answer : B. Removes dental plaque

While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations per minute. c. You have to check compression point by thumbing before starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations ... starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : c. You have to check compression point by thumbing before starting compression.

Frankfort plane extends from, A. horizontally from Sella to nasion B. Sagittal from …. C. Horizontally from point on superior aspect of external auditory meatus to orbitale

Description : Frankfort plane extends from, A. horizontally from Sella to nasion B. Sagittal from …. C. Horizontally from point on superior aspect of external auditory meatus to orbitale

Last Answer : C. Horizontally from point on superior aspect of external auditory meatus to orbitale

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 reseparations per minute C. You have to check compression point by thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 ... thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : C. You have to check compression point by thumping before starting compression

A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy

Description : A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy

Last Answer : C. Calcium hydroxide pulpotomy

The advantage of using dental floss over rubber point interdentally: A. Remove plaque and debris in interproximal surfaces B. Polish C. Massage of the interdental papillae D. Aid and recognise subgingivally

Description : The advantage of using dental floss over rubber point interdentally: A. Remove plaque and debris in interproximal surfaces B. Polish C. Massage of the interdental papillae D. Aid and recognise subgingivally

Last Answer : A. Remove plaque and debris in interproximal surfaces

In regard to indirect compared to direct wax technique, what characteristics must the wax have:** A. Low temperature solidifying point B. Hard in room temperature C. Higher flow in room temperature

Description : In regard to indirect compared to direct wax technique, what characteristics must the wax have:** A. Low temperature solidifying point B. Hard in room temperature C. Higher flow in room temperature

Last Answer : B. Hard in room temperature

The technique of placing guttapercha cones against the root canal walls providing space for additional guttapercha is termed: A. Lateral Condensation B. One major Gutta Percha point C. Laterally above condensed

Description : The technique of placing guttapercha cones against the root canal walls providing space for additional guttapercha is termed: A. Lateral Condensation B. One major Gutta Percha point C. Laterally above condensed

Last Answer : A. Lateral Condensation

Is it ok to use acrylic paint (water based) for airbrushing?

Description : Is it ok to use acrylic paint (water based) for airbrushing?

Last Answer : I’ve never tried it but acrylics dry quickly and could clog your equipment. Apparently you can use acrylics but not the standard type, at least without thinning the paint: http://www.airbrush-kits.com/paint

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning