Which of the following procedures will not achieve sterilization: A. Hot air at 160ºC for 90mins B. Boiling water at 100ºC for 2 hours C. Autoclave at 121ºC under 15psi for 20 mins D. Dry heat at 177ºC for 60mins E. All of the above will achieve sterilisation

Which of the following procedures will not achieve sterilization:
A. Hot air at 160ºC for 90mins
B. Boiling water at 100ºC for 2 hours
C. Autoclave at 121ºC under 15psi for 20 mins
D. Dry heat at 177ºC for 60mins
E. All of the above will achieve sterilisation
by

1 Answer

Answer :

B. Boiling water at 100ºC for 2 hours
by

Related questions

The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Description : The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Last Answer : b. Chemical sterilisation.

The sterilisation of Gutta Percha is achieved by: A. Heat B. Chemical sterilisation C. Flame D. Boiling E. Autoclave

Description : The sterilisation of Gutta Percha is achieved by:  A. Heat  B. Chemical sterilisation  C. Flame  D. Boiling  E. Autoclave 

Last Answer : B. Chemical sterilisation 

What is the mode of action of autoclaving “Moist sterilisation”: A. Moist heat sterilization B. Protein denaturation

Description : What is the mode of action of autoclaving “Moist sterilisation”: A. Moist heat sterilization B. Protein denaturation

Last Answer : A. Moist heat sterilization

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Your employer makes an attempt to update office sterilization procedures; what would you recommend as the BEST method to verify that sterilization has occurred:** A. Use spore test daily B. Use indicator strips in each load and colour change tape on each package C. Use indicator strips daily and spore test weekly D. Use colour change tape daily and spore test monthly E. Use colour change tape in each load and spore tests weekly

Description : Your employer makes an attempt to update office sterilization procedures; what would you recommend as the BEST method to verify that sterilization has occurred:** A. Use spore test daily B. Use ... daily and spore test monthly E. Use colour change tape in each load and spore tests weekly

Last Answer : E. Use colour change tape in each load and spore tests weekly

What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Description : What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Last Answer : C 15 min 15 lbs

Which impression material should NOT be kept in water within on hour: (in another paper it was: 30 mins before pouring) A. Polyether B. Condensation silicone C. Polyvinyl silicone

Description : Which impression material should NOT be kept in water within on hour: (in another paper it was: 30  mins before pouring)  A. Polyether  B. Condensation silicone  C. Polyvinyl silicone 

Last Answer : A. Polyether 

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Describe dry heat method of sterilization in detail.

Description : Describe dry heat method of sterilization in detail.

Last Answer : Principle: All the microorganism including spores are destroyed. Principle of killing is by dehydration and oxidation of essential metabolites. In hot air oven heating is done at 1600 C for 2 hours. ... off the oven. Allow to cool. Take out the material.  Diagram:

A patient on the dental chair has cardiac arrest. What is INCORRECT, A. Observing the vital signs and check that the air way is clear is at high importance B. Expired air has 15% O2 only, and cardiac compressions achieve 30-40% of cardiac output C. Intermittent positive pressure at the rate of 40/min will reduce the chances of cerebral hypoxia D. Intermittent positive pressure is better than mouth to mouth when it has been given at the same rate.

Description : A patient on the dental chair has cardiac arrest. What is INCORRECT, A. Observing the vital signs and check that the air way is clear is at high importance B. Expired air has 15% O2 only, ... D. Intermittent positive pressure is better than mouth to mouth when it has been given at the same rate.

Last Answer : C. Intermittent positive pressure at the rate of 40/min will reduce the chances of cerebral hypoxia

Suitable method of sterilization of powders is - - - - - - - - A Autoclaving B Hot Air Oven C UV radiation D Gaseous

Description : Suitable method of sterilization of powders is - - - - - - - - A Autoclaving B Hot Air Oven C UV radiation D Gaseous

Last Answer : B Hot Air Oven

Sterilization potency of which of the following method is highest? A Filtration B Hot Air oven C Ultra sound waves D Autoclaving

Description : Sterilization potency of which of the following method is highest? A Filtration B Hot Air oven C Ultra sound waves D Autoclaving

Last Answer : D Autoclaving

A boys rows to a certain place and comes back, but by mistake he covers 2/3rd more distance while coming back. The total time for this journey is 20 hours. The ratio of speed of boat to that of stream is 2 : 1. If the difference between upstream and downstream speed is 24km/hr, then how much time will the man take to reach to starting point from his present position? A) 2hr 13mints B)1hr 30 mins C) 2hr 30mins D)1hr 40 mins

Description : A boys rows to a certain place and comes back, but by mistake he covers 2/3rd more distance while coming back. The total time for this journey is 20 hours. The ratio of speed of boat to that of ... starting point from his present position? A) 2hr 13mints B)1hr 30 mins C) 2hr 30mins D)1hr 40 mins

Last Answer : ANSWER : A Explanation: let speed of boat and stream be 2x and x respectively So downstream speed = 2x+x = 3x, and upstream speed = 2x-x = x Let total distance between points is d km So he covered d ... with speed 3x = 48 km/hr(downstream) So time is 80/36 * 60 = 133.33 minutes = 2hr 13mins

To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in addition to the direction of individual root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Description : Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Last Answer : A. Mechanical trauma due to cavity preparation

During extraction of a maxillary third molar the tuberosity is fractured; however, it remains in place attached to the mucoperiosteum. Which of the following procedures should be employed:** A. Remove the tuberosity and suture B. Leave the tuberosity and stabilize if required C. Remove the tuberosity and fill the defect with Gelfoam then suture. D. If fractured tuberosity is greater than 2 cm, leave in place and suture

Description : During extraction of a maxillary third molar the tuberosity is fractured; however, it remains in place attached to the mucoperiosteum. Which of the following procedures should be employed:** A. Remove the ... then suture. D. If fractured tuberosity is greater than 2 cm, leave in place and suture

Last Answer : B. Leave the tuberosity and stabilize if required

An auditor should design the written audit program so that a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized. c. Each account balance will be tested under either tests of controls or tests of transactions. d. The audit procedures selected will achieve specific audit objectives

Description : An auditor should design the written audit program so that a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date ... controls or tests of transactions. d. The audit procedures selected will achieve specific audit objectives

Last Answer : The audit procedures selected will achieve specific audit objectives

An auditor should design a written audit program so that: a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized. c. The audit procedures selected will achieve specific audit objectives. d. Each account balance will be tested under either tests of controls or tests of transactions

Description : An auditor should design a written audit program so that: a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized ... . d. Each account balance will be tested under either tests of controls or tests of transactions

Last Answer : The audit procedures selected will achieve specific audit objectives

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

The initial condylar guidance of 25 degrees was wrong and is changed to 45 degrees. What changes will you make to achieve balanced occlusion: A. Decrease incisal guidance B. Reduce cusps height C. Increase compensation curve

Description : The initial condylar guidance of 25 degrees was wrong and is changed to 45 degrees. What changes will you make to achieve balanced occlusion: A. Decrease incisal guidance B. Reduce cusps height C. Increase compensation curve

Last Answer : C. Increase compensation curve

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Description : In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Last Answer : C. Ends at the dentino-cemental junction

After prophylactic treatment, you decide to change the flora to a non-acidogenic by changing the diet. How long does it take to achieve this change: A. Few weeks B. Several months or longer

Description : After prophylactic treatment, you decide to change the flora to a non-acidogenic by changing the diet. How long does it take to achieve this change: A. Few weeks B. Several months or longer

Last Answer : B. Several months or longer

A motor car starts with the speed of 70 km/hr with its speed increasing every two hours by 10 kmph. In how many hours will it cover 345 kms? A.4 hrs B.4 hrs 5 mins C.4 1/2 hrs D.2 hrs E.None of these

Description : A motor car starts with the speed of 70 km/hr with its speed increasing every two hours by 10 kmph. In how many hours will it cover 345 kms? A.4 hrs B.4 hrs 5 mins C.4 1/2 hrs D.2 hrs E.None of these

Last Answer : Answer - C (4 1/2 hrs) Explanation - Distance covered in first 2 hours = (70 x 2) km = 140 km Distance covered in next 2 hours = (80 x 2) km = 160 km Remaining distance = 345 - (140 + 160) = 45 km. Speed in the ... ..1 hr 45km .? ?=45/90hr=1/2hr Total time taken = 2 + 2 +1/2=4 (1/2)hrs

What is TRUE: A. Boiling point of acrylic acid > boiling point of water B. Boiling point of acrylic acid is similar to that of water C. Boiling point of acrylic acid < boiling point of water

Description : What is TRUE: A. Boiling point of acrylic acid > boiling point of water B. Boiling point of acrylic acid is similar to that of water C. Boiling point of acrylic acid < boiling point of water

Last Answer : B. Boiling point of acrylic acid is similar to that of water

How do you prepare the floor of pulp chamber in molars: A. Swab and dry with cotton wool and excavate B. Use round bur to flatten the floor C. Under cut walls D. Use flat end fissure bur to make it levelled

Description : How do you prepare the floor of pulp chamber in molars: A. Swab and dry with cotton wool and excavate B. Use round bur to flatten the floor C. Under cut walls D. Use flat end fissure bur to make it levelled

Last Answer : A. Swab and dry with cotton wool and excavate

When dry cast is immersed in water saturated with calcium sulphate:** A. There is contraction B. There is negligible expansion C. There is definite expansion D. There is no change E. None of the above

Description : When dry cast is immersed in water saturated with calcium sulphate:** A. There is contraction B. There is negligible expansion C. There is definite expansion D. There is no change E. None of the above

Last Answer : B. There is negligible expansion

Browne’s tubes are the most commonly used indicator for _ _ _ _ _ _ _ _ A Heat sterilization B Radiation sterilization C Gaseous sterilization D Filtration sterilization

Description : Browne’s tubes are the most commonly used indicator for _ _ _ _ _ _ _ _ A Heat sterilization B Radiation sterilization C Gaseous sterilization D Filtration sterilization

Last Answer : A Heat sterilization

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Write in detail about moist heat method of sterilization

Description : Write in detail about moist heat method of sterilization

Last Answer : Principle: The steam has more penetration power than dry heat and thermal capacity of steam is more than thermal capacity of dry heat. The method is useful for killing of bacterial spores. ... for powder or oils. It is not suitable for sterilization of plastic which melt at 1150C.

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

The elimination half life of Diazepam is in the range of: A. 2-5 hours B. 5-12 hours C. 12-30 hours D. 30-48 hours E. 48-96 hours

Description : The elimination half life of Diazepam is in the range of: A. 2-5 hours B. 5-12 hours C. 12-30 hours D. 30-48 hours E. 48-96 hours

Last Answer : C. 12-30 hours

Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all

Description : Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all

Last Answer : B. Immediately after application

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

A patient presents complaining of a stomach upset 48 hours after starting a course of antibiotic for oral infection, this is an example of, A. Type I allergic reaction B. Nervous disorder C. Side effect of the drug D. Type IV hypersensitivity reaction E. Pyloric stenosis

Description : A patient presents complaining of a stomach upset 48 hours after starting a course of antibiotic for oral infection, this is an example of, A. Type I allergic reaction B. Nervous disorder C. Side effect of the drug D. Type IV hypersensitivity reaction E. Pyloric stenosis

Last Answer : C. Side effect of the drug

What is NOT TRUE in relation to the prescription of 5mg or 10mg of diazepam for sedation?check A. Patient commonly complain of post operative headache T B. An acceptable level of anxiolytic action is obtained when the drug is given one hour preoperatively T C. There is a profound amnesic action and no side affects not sure D. Active metabolites can give a level of sedation up to 8 hours post operatively T E. As Benzodiazepine the action can be reversed with FlumazepilNE T

Description : What is NOT TRUE in relation to the prescription of 5mg or 10mg of diazepam for sedation?check A. Patient commonly complain of post operative headache T B. An acceptable level of anxiolytic ... to 8 hours post operatively T E. As Benzodiazepine the action can be reversed with FlumazepilNE T

Last Answer : C. There is a profound amnesic action and no side affects not sure

Infective bacteria in water is killed by the __________ process. (A) Sterilisation (B) Aeration (C) Disinfection (D) None of these

Description : Infective bacteria in water is killed by the __________ process. (A) Sterilisation (B) Aeration (C) Disinfection (D) None of these

Last Answer : (A) Sterilisation

__________ is the process of killing organism in water. (A) Coagulation (B) Sterilisation (C) Disinfection (D) Sedimentation

Description : __________ is the process of killing organism in water. (A) Coagulation (B) Sterilisation (C) Disinfection (D) Sedimentation

Last Answer : (C) Disinfection

As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic prescription of antibiotics prior to extraction reduces the incidence. C. Excessive fibrinolysis is the likely aetiology D. Purulent exudate must be seen for a diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth

Description : As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic ... diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth

Last Answer : C. Excessive fibrinolysis is the likely aetiology

Which of the following statements about independent financial statement audit is incorrect? a. The term "scope of the audit" refers to audit procedures deemed necessary ithe circumstances to achieve the objective of the audit. b. The auditor's opinion enhances the credibility of the financial statements. c. The phrase used to express the auditor's opinion is "present fairly, in all material respects". d. The risk that the auditor will fail to uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.n

Description : Which of the following statements about independent financial statement audit is incorrect? a. The term "scope of the audit" refers to audit procedures deemed necessary in the circumstances ... uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.

Last Answer : The risk that the auditor will fail to uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.

A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be filled through the first and the fourth inlet in 40 minutes. How much time required to fill up the barrier by all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Description : A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be ... all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Last Answer : C (1/A + 1/B + 1/C) = 1/24 …(i) (1/B + 1/C + 1/D) = 1/30 …(ii) (1/A + 1/D) = 1/40…(iii) From eqn (i) and (ii) (1/A – 1/D) = 1/120…(iv) From eqn (iii) and (iv) A=60,D=120. Let the time taken to full the tank = s S(1/A + 1/B +1/C +1/D)= 1 S(1/24+1/120) = 1 S= 20 mins

As part of a voluntary sterilisation, would it be immoral to harvest human eggs and sell them as human caviar?

Description : As part of a voluntary sterilisation, would it be immoral to harvest human eggs and sell them as human caviar?

Last Answer : And what about human “rocky mountain oysters”?

Assertion : Vasectomy is considered in permanent sterilisation method in male . Reason : It show immediate sterilisation after procedure .

Description : Assertion : Vasectomy is considered in permanent sterilisation method in male . Reason : It show immediate sterilisation after procedure .

Last Answer : Assertion : Vasectomy is considered in permanent sterilisation method in male . Reason : It show immediate ... . If both Assertion & Reason are False.

Tubectomy is a method of sterilisation in which (a) small part of the fallopian tube is removed or tied up (b) ovaries are removed surgically (c) small part of vas deferens is removed or tied up (d) uterus is removed surgically.

Description : Tubectomy is a method of sterilisation in which (a) small part of the fallopian tube is removed or tied up (b) ovaries are removed surgically (c) small part of vas deferens is removed or tied up (d) uterus is removed surgically.

Last Answer : (a) small part of the fallopian tube is removed or tied up

Define sterilisation and classify methods of sterilisation.

Description : Define sterilisation and classify methods of sterilisation.

Last Answer : Definition: Sterilizations is the process of complete destruction of all microorganisms along with their spores present in the system.  Methods of sterilization:  I. Physical methods:  1. Dry heat ... . Seitz filters  3. Sintered glass filters 4. Sintered metal filters  5. Membrane filters

Classify the methods of sterilisation with example.

Description : Classify the methods of sterilisation with example.

Last Answer : Method of sterilization :-  A)Physical method Dry heat sterilization e.g. hot air oven Moist heat sterilization e.g. Autoclave Radiation sterilization a) Use of ultra violet rays ... Ceramic filters Seitz glass filter Sintered glass filters Sintered metal filters Membrane filters

Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Last Answer : A. Clean with pumice, rubber cup, water and weak acid

A water cistern is two-fifth full. Tap A can fill a cistern in 20 mins and tap B can empty it in 12mins. If both the taps are open, how long will take to empty or fill the cistern completey? A) 10 mins B) 12mins C) 14mins D) 16 mins

Description : A water cistern is two-fifth full. Tap A can fill a cistern in 20 mins and tap B can empty it in 12mins. If both the taps are open, how long will take to empty or fill the cistern completey? A) 10 mins B) 12mins C) 14mins D) 16 mins

Last Answer : B Clearly tap B is faster than the Tap A and so, the cistern will be emptied Part to be emptied = 2/5 Part emptied by (A+B) in 1 min = (1/12 – 1/20) = 5-3/60 = 2/60 =>1/30 Therefore 1/30 : 2/5 :: 1;x x= 1*2/5 *30/1 = 12mins so the tank will be emptied in 12mins.

Which of the following is not true about warfarin, a. INR of 3 is enough to start any extraction. b. Affects extrinsic system and increases prothrombin time. c. Heparin can be given subcutaneously and acts rapidly. d. It takes at least 12 hours for Vitamin K to reverse the effects of coumarin.

Description : Which of the following is not true about warfarin, a. INR of 3 is enough to start any extraction. b. Affects extrinsic system and increases prothrombin time. c. Heparin can be given subcutaneously ... rapidly. d. It takes at least 12 hours for Vitamin K to reverse the effects of coumarin.

Last Answer : d. It takes at least 12 hours for Vitamin K to reverse the effects of coumarin.