They were fabricated using a low power version of the HMOS technology called____:
a. HSMOS
b. HCMOS
c. HSSOM
d. None of these

1 Answer

Answer :

b. HCMOS

Related questions

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

Description : Which technology speed faster and higher density: a. PMOS b. NMOS c. HMOS d. All the above

Last Answer : a. PMOS

Description : Which technology using the microprocessor is fabricated on a single chip: a. POS b. MOS c. ALU d. ABM

Last Answer : b. MOS

Description : HMOS stands for: a. High performance metal oxide semiconductor b. High processor metal oxide semiconductor c. Both A and b d. None of these

Last Answer : a. High performance metal oxide semiconductor

Description : Microprocessor is fabricated on single chip using: a. MOS b. ALU c. CPU d. All of these

Last Answer : a. MOS

Description : Secondary memory is also called____: a. Auxiliary b. Backup store c. Both A and B d. None of these

Last Answer : c. Both A and B

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : Which is the professional or Business version of Intel Processors: a. Pentium II b. Pentium Pro c. Pentium MMX d. Pentium Xeon

Last Answer : d. Pentium Xeon

Description : In 1977 which corporation introduced an updated version of the 8080- the 8085: a. Motorola b. Intel c. Rockwell d. National

Last Answer : b. Intel

Description : Which year Intel corporation introduced an updated version of the 8080- the 8085: a. 1965 b. 1976 c. 1977 d. 1985

Last Answer : c. 1977

Description : Which Microprocessor producer continue successfully to create newer and improved version of the microprocessor: a. Intel b. Motorola c. Both A and B d. None of these

Last Answer : c. Both A and B

Description : Intel 8008 microprocessor’s upgraded version is: a. 8080 b. 4004 c. Both A and B d. None of these

Last Answer : a. 8080

Description : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Last Answer : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Description : Each middle ear consist of three tiny bones ____,___ and ____ collectively called____

Last Answer : Each middle ear consist of three tiny bones ____,___ and ____ collectively called____

Description : When a computer is first turned on or restarted, a special type of absolute loader called____ is executed 1) Compile and Go loader 2) Boot loader 3) Bootstrap loader 4) Relating loader

Last Answer : 3) Bootstrap loader

Description : When a computer is first turned on or restarted, a special type of absolute loader called____ is executed 1 Compile and Go loader 2 Boot loader 3 Bootstrap loader 4 Relating loader

Last Answer : 3 Bootstrap loader

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : a) EA, high, internal, external

Description : Which of the following processors use RISC technology? a. 486dx b. Power PC c. 486sx d. 6340

Last Answer : b. Power PC

Description : How many iPad models were fabricated?

Last Answer : There have only been two generations of the iPad so far. The first and second generations of the iPad have been highly successful, and the third generation is rumored to be out soon.

Description : An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Last Answer : Answer : D

Description : What are the destinations of the organic material fabricated by the producers ?

Last Answer : Part of the organic material synthesized by the producers is consumed as energy source for the metabolism of the own producer individual. Other part is incorporated (into the body) and become available ... and only a fraction is incorporated and become available as food for the following level.

Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Last Answer : (D) Light and resists attack by acids

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Last Answer : (a) Derrick Crane

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : A helical spring is fabricated by wrapping wire 19.05 mm in diameter around a forming cylinder 203.2 mm in diameter. Compute the number of turns required to permit an elongation of 101.6 mm. without exceeding a shearing ... G = 82737 N/mm2. a. 10 turns b. 20 turns c. 25 turns d. 30 turns

Last Answer : a. 10 turns

Description : Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation. 

Last Answer : Noise pollution is the serious or more noise that may damage the activity or human life. The contribution of most outside noise is mainly due to building activities. Noise pollution affects both health and ... iv) Sleep interference v) Habit of talking loudly vi) Hearing loss vii) Concentration

Description : How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

Description : Which provided the current: a. Low-cost b. Slow-cost c. Low-Output d. All the above

Last Answer : d. All the above

Description : Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Low powers consumption

Last Answer : b. Extremely high reliability

Description : The advantage of COM are its … and … a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Last Answer : b. Compact size, speed

Description : Which of the following is machine independence program? a. High level language b. Low level language c. Assembly language d. Machine language

Last Answer : a. High level language

Description : which of the following is problem oriented language? a. High level language b. Machine language c. Assembly language d. Low level language

Last Answer : a. High level language

Description : Which of the following is called low level languages? a. Machine language b. Assembly language c. Both of the above d. None of above

Last Answer : c. Both of the above

Description : Which of the following is not computer language? a. High level language b. Medium level language c. Low level language d. All of the above

Last Answer : b. Medium level language

Description : A___ on this pin indicates a memory operation: a. Low b. High c. Medium d. None of these

Last Answer : a. Low

Description : When CS _____ the chip is not selected at all hence D7 to D0 are driven to high impedance state: a. High b. Low c. Medium d. Stand by

Last Answer : a. High

Description : Which statement is false about WR signal: a. WR signal controls the input buffer b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input

Last Answer : c. The bar over WR means that this is an active high signal

Description : MSD stands for: a. Least significant digit b. Most significant digit c. Medium significant digit d. low significant digit

Last Answer : b. Most significant digit

Description : The left side of any binary number is called: a. Least significant digit b. Most significant digit c. Medium significant digit d. low significant digit

Last Answer : b. Most significant digit

Description : The area of memory with addresses near zero are called: a. High memory b. Mid memory c. Memory d. Low memory

Last Answer : d. Low memory

Description : In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Last Answer : a) 000BH, a high to low transition on pin INT1

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

Description : The growth of LSI technology on_____: a. 1994-1995 b. 1971-1977 c. 1972-1978 d. None of these

Last Answer : b. 1971-1977

Description : How are the growth of SSI technology in_____: a. 1956 on words b. 1965 on words c. 1978 on words d. 1978 on words

Last Answer : b. 1965 on words