A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

A byte consists of
a. One bit
b. Four bits
c. Eight bits
d. Sixteen bits
by

1 Answer

Answer :

c. Eight bits
by

Related questions

A byte consists of A) One bit B) Four bits C) Eight bits D) Sixteen bits

Description : A byte consists of A) One bit B) Four bits C) Eight bits D) Sixteen bits

Last Answer : Answer : C

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : c. Eight bits

One byte consists of 1) four bits 2) one bit 3) ten bit 4) eight bits

Description : One byte consists of 1) four bits 2) one bit 3) ten bit 4) eight bits

Last Answer : 4) eight bits

One byte consists of (1) one bit (2) four bits (3) eight bits (4) ten bits

Description : One byte consists of (1) one bit (2) four bits (3) eight bits (4) ten bits

Last Answer : eight bits

The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Last Answer : c. 7

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : c) 232 byte, five 8bit, register to register

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : d) 232 byte, six 8 bit, register to register

A collection of 8 bits is called a. byte b. word c. record

Description : A collection of 8 bits is called a. byte b. word c. record

Last Answer : a. byte

Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Last Answer : a. BYTE

____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT c) Control Register Zero, PWT, PCD d) none

Description : ____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT c) Control Register Zero, PWT, PCD d) none

Last Answer : d) none

A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : c. 4 byte

SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Description : SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Last Answer : d) 8 bit, 06H

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit

Last Answer : c) 40, 8 bit

In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO

Description : In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO

Last Answer : b) 8-byte FIFO

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte

Last Answer : c) 40, 8 bit

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Last Answer : d. Cannot be determined

170. A character is represented in EBCDIC by: a) One bit b) Four bits c) Eight bits d) None of The Above

Description : 170. A character is represented in EBCDIC by: a) One bit b) Four bits c) Eight bits d) None of The Above

Last Answer : c) Eight bits

In a Computer a byte generally consists of: (A) 4 bits (B) 8 bits (C) 16 bits (D) 10 bits

Description : In a Computer a byte generally consists of: (A) 4 bits (B) 8 bits (C) 16 bits (D) 10 bits

Last Answer : (B) 8 bits

A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Last Answer : none of above

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Last Answer : c. 7

Which of the following is true? 1) Byte is a single digit in a binary number 2) Bit represents a grouping of digital numbers 3) Eight-digit binary number is called a byte 4) Eight-digit binary number is called a bit 5) None of these

Description : Which of the following is true? 1) Byte is a single digit in a binary number 2) Bit represents a grouping of digital numbers 3) Eight-digit binary number is called a byte 4) Eight-digit binary number is called a bit 5) None of these

Last Answer : Answer :3

Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Description : Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Last Answer : (C) Eight times that of B

In a footstep bearing, if the radius of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Description : In a footstep bearing, if the radius of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Last Answer : Answer: Option D

In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Description : In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Last Answer : Answer: Option A

In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Description : In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be (A) Double (B) Four times (C) Eight times (D) Sixteen times

Last Answer : Answer: Option A

Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of shaft B. The power transmitted by the shaft A will be ........... of shaft B. (a) twice (b) four times (c) eight times (d) sixteen times

Description : Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of shaft B. The power transmitted by the shaft A will be ........... of shaft B. (a) twice (b) four times (c) eight times (d) sixteen times

Last Answer : (c) eight times

How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five

Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five

Last Answer : b) Sixty four

Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Last Answer : A. agreed upon in advance between sender and receiver

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Steps involved to fetch a byte in 8085

Description : Steps involved to fetch a byte in 8085

Last Answer : i. The PC places the 16-bit memory address on the address bus ii. The control unit sends the control signal RD to enable the memory chip iii. The byte from ... byte is placed in the instruction decoder of the microprocessor and the task is carried out according to the instruction

A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Last Answer : c. An address

The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Description : The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Last Answer : c. Data density

Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Description : Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Last Answer : b. PC Magazine

A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Last Answer : c. An address

The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Description : The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Last Answer : a) Parallel, byte stream.

In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

How many quarters can be found in eight\sixteen?

Description : How many quarters can be found in eight\sixteen?

Last Answer : Two

Eight men can do a certain amount of work in 3 days. Sixteen men can do the same amount of work in 6 days. It is true or false.?

Description : Eight men can do a certain amount of work in 3 days. Sixteen men can do the same amount of work in 6 days. It is true or false.?

Last Answer : Eight men can do a certain amount of work in 3 days. Sixteen men can do the same amount of work in 6 days. It is true or false.?

The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Last Answer : Answer: Option D

Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

In a simple economy of five producers and five consumers, there would be __________ transactions possible without an intermediary and __________ transactions possible with one intermediary. A)ten; twenty -five B)thirty; ten C)twenty -five; fifteen D)sixteen; eight E)twenty -five; ten

Description : In a simple economy of five producers and five consumers, there would be __________ transactions possible without an intermediary and __________ transactions possible with one intermediary. A)ten; twenty-five B)thirty; ten C)twenty-five; fifteen D)sixteen; eight E)twenty-five; ten

Last Answer : E)twenty-five; ten