If someone says they are a "CI Bean", what does that mean?

1 Answer

Answer :

answer:Resident of Jersey. usu. just “Bean” or “Jersey Bean” Because they eat so much bean soup.

Related questions

Description : What does 24x7x8 mean?

Last Answer : what website ? i was going to suggest it was measurements for something dimensions . i know i am most likely wrong so i am ready for the laughter

Description : Where did Mrs. come from?

Last Answer : It’s the abbreviation for “mistress.”

Description : Power Maintenance ABBREVIATIONS

Last Answer : 1 W - Watts 2 KW - Kilowatts 3 KWH - Kilowatt Hour 4 KVA - Kilo Volt Amps 5 KVAR - Kilo Volt Ampers Reactive 6 H.P. - Horse Power 7 A.H. - Ampere Hours 8 P.F. - Power Factor 9 R.P.M. - ... L.T.U.G - Low Tension Under Ground 36 P.V.C. - Poly Vinly Chloride 37 H.R.C. - High Rapturing Capacity

Description : Important Abbreviations

Last Answer : Important Abbreviations Abbreviations are extremely important to learn. You need to use abbreviations in your daily communication models. However, it is also important to update yourself with respect to ... Atomic Research Centre 44. BBC - British Broadcasting Corporation 45. BC - Before Christ

Description : ABBREVIATIONS

Last Answer : Q, R QMG: Quarter Master General QR: Quantitative Restriction RAF: Rapid Action Force RAM: Random Access Memory RBI: Reserve Bank of India RCC: Reinforced Concrete Cement RDF: ... in 1988 by the World Meteorological Organisation (WMO) and the United Nations Environment Programme (Unep)

Description : What is the difference between a BMW 645 Ci and 650i?

Last Answer : The 650i replaced the 645Ci in 2005, it has a slightly larger engine.

Description : when cI trim a buring red bush

Last Answer : Trim it now. It will fill out and be even more beautiful this coming fall. Limit your pruning to 1/3 the height of the shrub.

Description : Total number of optically active stereoisomers of `CH_(3)-underset(overset(|)(CI))(C)H-CH=CH-underset(overset(|)(CI))(C)H-CH_(3)` are :

Last Answer : Total number of optically active stereoisomers of `CH_(3)-underset(overset(|)(CI))(C)H-CH=CH-underset(overset(|)(CI))(C)H-CH_(3)` are :

Description : Total number of stereoisomers of compound `CH_(3)-CH=CH-underset(overset(|)(CI))(C)H-CH=CH-CH_(3)` are :

Last Answer : Total number of stereoisomers of compound `CH_(3)-CH=CH-underset(overset(|)(CI))(C)H-CH=CH-CH_(3)` are :

Description : Total number of optically stereoisomers of `CH_(3)-underset(overset(|)(CI))(C)H-underset(overset(|)(CI))(C)H-underset(overset(|)(CI))(C)H-CH_(3)`

Last Answer : Total number of optically stereoisomers of `CH_(3)-underset(overset(|)(CI))(C)H-underset(overset(|)(CI))(C)H-underset( ... CH_(3)` A. 2 B. 4 C. 6 D. 8

Description : Which of the following are correct with respect to the unit of radioactivity? (i) The SI unit of radioactivity is curie (Ci) (ii) `1 Ci = 3.7 xx 10^(-

Last Answer : Which of the following are correct with respect to the unit of radioactivity? (i) The SI unit of radioactivity is ... (i) and (ii) D. (ii) and (iv)

Description : The major product (B) formed in the reaction sequence is: `overset(Ph-overset(O)overset(||)(C)-CI)underset(dil.NaOH)rarrA overset(1.CH_(3)MgBr)underse

Last Answer : The major product (B) formed in the reaction sequence is: `overset(Ph-overset(O)overset(||)(C)-CI)underset(dil. ... )overset(||)(C)-CH_(3)` B. C. D.

Description : In the given reaction `CH_(3)-CH_(2)-NH-CH_(2)-CH_(2)-CI overset((i)CH_(3)I ("excess"))underset((ii)AgOH//Delta)rarr[X]` is the major product, [X] wil

Last Answer : In the given reaction `CH_(3)-CH_(2)-NH-CH_(2)-CH_(2)-CI overset((i)CH_(3)I ("excess"))underset((ii)AgOH// ... of (a) and (b) D. `CH_(3) -CH_(2)-CI`

Description : `(CH_(3))_(3)COCH_(3)overset(+HI)rarr(CH_(3))_(3)CI+CH_(3)OH` follows which mechanism ?

Last Answer : `(CH_(3))_(3)COCH_(3)overset(+HI)rarr(CH_(3))_(3)CI+CH_(3)OH` follows which mechanism ? A. `S_(N)1` B. `S_(N)2` C. `E_(1)` D. `E_(2)`

Description : `(CH_(3))_(3)COCH_(3)overset(+HI)rarr(CH_(3))_(3)CI+CH_(3)OH` follows which mechanism ?

Last Answer : `(CH_(3))_(3)COCH_(3)overset(+HI)rarr(CH_(3))_(3)CI+CH_(3)OH` follows which mechanism ? A. `S_(N)1` B. `S_(N)2` C. `E_(1)` D. `E_(2)`

Description : Four particles `alpha`-particle, deuteron and electron and a `CI^(-)` ion enter in a transverse magnetic field perpendicular to it with same kinetic e

Last Answer : Four particles `alpha`-particle, deuteron and electron and a `CI^(-)` ion enter in a ... shown in figure. Now match the following two columns.

Description : How can you rid non-response bias from a 95 confidence interval for the population proportion a) use t b) make CI 99 c) make CI 80 d) Increase n by 250 and use an SRS for those remaining e) none?

Last Answer : The answer is e) none. You cannot rid non-response bias.

Description : In the reaction M g C I 2 plus 2 KO H - and gt MG OH 2 plus 2 K CI if 1 mole Mg CI 2 is added to 3 moles KO H what is the limiting reagent?

Last Answer : Feel Free to Answer

Description : How can you rid non-response bias from a 95 confidence interval for the population proportion a) use t b) make CI 99 c) make CI 80 d) Increase n by 250 and use an SRS for those remaining e) none?

Last Answer : The answer is e) none. You cannot rid non-response bias.

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

Description : Solid injection in CI engine means injection of A. solid fuel only B. liquid fuel only C. liquid fuel and air D. solid fuel and air

Last Answer : ANSWER : B

Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Last Answer : ANSWER : D

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

Description : Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Last Answer : Answer: c Explanation: None.

Description : The knocking tendency in CI engines increases with (a) Increase of coolant water temperature (b) Increase of temperature of inlet air (c) Decrease of compression ratio (d) Increase of compression ratio

Last Answer : Ans :c

Description : Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Last Answer : Ans :c

Description : The tendency of knocking in CI engine reduces by (a) High self ignition temperature of fuel (b) Decrease in jacket water temperature (c) Injection of fuel just before TDC (d) Decrease in injection pressure

Last Answer : Ans :c

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

Description : In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Last Answer : Option A

Description : 89. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–

Last Answer : The value of Ci+ and Ci–

Description : 84. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–

Last Answer : The value of Ci+ and Ci–

Description : 82. After the value of Ci– increasing than the value of the process is said to be out-of-control. a) Control interval b) Decision interval c) Distribution interval d) Calculation interval

Last Answer : Control interval

Description : Which cloud would you encounter the most intensive rain? a. Ci b. Ns c. St d. Sc

Last Answer : b. Ns

Description : In what cloud is icing and turbulence most severe? a. Cb b. Ns c. Sc d. Ci

Last Answer : a. Cb

Description : Which cloud would you encounter the most intensive rain? a. Ci b. Ns c. St d. Sc

Last Answer : b. Ns

Description : In what cloud is icing and turbulence most severe? a. Cb b. Ns c. Sc d. Ci

Last Answer : a. Cb

Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)

Last Answer : B. CI=[E/(N+E) ]×100

Description : Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)

Last Answer : A. CI=[(E×10000) /(D×W) ]×100

Description : Botanical Words Alphabetical List - CI

Last Answer : CILIATE: Marginally fringed with hairs. CILIOLATE: Marginally fringed with tiny hairs. CINCINNUS: A form of definite flowering in which the successive axes arise alternately to the right and left of the ... CIRRUS: A tendril; a long thread-like part by which some plants climb. Also cirrhus.

Description : Discuss causes and remedies for following faults in CI engine: (i) Engine does not start or stalls just after starting (ii) Excessive fuel consumption.

Last Answer : I) Engine does not start or stalls just after starting

Description : Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Last Answer : Parameter SI engine CI engine Air-fuel ratio air-fuel ratio is 14.7:1 air-fuel ratio is 20:1 to 70:1  Power output  Power output is Less than CI engine due ... Knocking take place at the end of combustion. Knocking take place at beginning or start of the combustion. 

Description : Define delay period in CI engine. Explain factors affecting delay period

Last Answer : The period between the start of fuel injection into the combustion chamber and the start of combustion is termed as delay period in CI engine. factors affecting delay period:-  

Description : Write the properties of diesel as a fuel in CI engine.

Last Answer : 1) Volatility: - The fuel should be sufficiently volatile in the operating range of temperature to produce good mixing and combustion. 2) Viscosity: Viscosity of a fuel is a measure of its resistance to flow. ... the temperature of unit mass of a diesel through 1°c. It is about 1.9 KJ/Kg°c.

Description : State the four properties of CI engine fuels.

Last Answer : Properties of CI fuel: (1) Volatility 2) Viscosity 3) Flash point 4) Fire point 5) Cetane number 6) Calorific value 7) Sulphur 8) Contamination 9) Cloud point 10) Pour point

Description : Compare performance characteristics of SI and CI engines. 

Last Answer : Variable/Parameter SI Engine CI Engine Power output per unit weight 2.7 Kg/Kw 6.5 Kg/Kw Power output per unit displacement 30 Kw/liter 15 Kw/liter Acceleration Not ... load, idling.  Fuel safety More volatile so less safer Less volatile so more safer

Description : Consider a full-adder with the following input values: (a) x=1, y=0 and Ci(carry input) = 0 (b) x=0, y=1 and Ci = 1 Compute the values of S(sum) and C0 (carry output) for the above input values. (A) S=1 , C0= 0 and ... C0= 1 (C) S=1 , C0= 1 and S=0 , C0= 0 (D) S=0 , C0= 1 and S=1 , C0= 0

Last Answer : (A) S=1 , C0= 0 and S=0 , C0= 1

Description : Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Last Answer : Parameter SI Engine CI Engine (i) Compression Ratio Compression ratio is low, about 10:1 limited by detonation Compression ratio is higher, about 18:1 to 22:1 (ii) ... due to lower compression ratio. Power output is more than SI engine due to higher compression ratio.

Description : Describe the Air Fuel Ratio in CI Engine.

Last Answer : Air Fuel Ratio in CI Engine: Thermodynamic analysis of the engine cycles has clearly established that operating an engine with a leaner air-fuel ratio always gives a better thermal efficiency but the ... always designed to operate with an excess air of 15 to 40% depending upon the application.

Description : In the following question, select the related letters from the given alternatives.  FK:CI::GL:? Options: 1) AH 2) RV 3) KP 4) DJ 

Last Answer : Correct Answer: DJ 

Description : Is there a better place to go to discuss something with someone, or console them, other than a coffee bean or starbucks?

Last Answer : I think a recreational park would be a great place to meet.