How many hours should a 50-hour rated chainsaw be expected to run?

How many hours should a 50-hour rated chainsaw be expected to run?
by

1 Answer

Answer :

The same thing, like gasoline. How much is a $5.00 a gallon gasoline? Five dollars.
by

Related questions

Is the top rated chainsaw fueled by gas, diesel or electricity?

Description : Is the top rated chainsaw fueled by gas, diesel or electricity?

Last Answer : People look for different things in a chainsaw. There are favs in multiple categories of chainsaws. But, all around Stihl is thought to offer the best chainsaws, for homeowners. And, they offer a variety of ... Makita 64cc 20-Inch Bar 4.7 HP Gas Powered Chain Saw is recommended time and time again.

A tube light rated 50 watts (electric powers) is used for 10 hours per day for 30 days in a month. How much electric energy is being consumed by it per month? Similary per year, how much energy will be consumed?

Description : A tube light rated 50 watts (electric powers) is used for 10 hours per day for 30 days in a month. How much electric energy is being consumed by it per month? Similary per year, how much energy will be consumed?

Last Answer : Ans. 50 x 10 x 30 = 15000watts = 15000/1000= 15 units per month. Per units consumed: 15X12= 180units per year.

Chainsaw starts to choke and leave at a heavier load, what about that?

Description : The saw is new and does not have a run mode. I put more gasoline in the first tank, I didn't have an exact measuring cup. I already mixed the second one in exact proportion, but it did ... lubricated thanks to the first tank and at a heavier load it loses compression and dies ?? Thanks for advice

Last Answer : I would adjust the air and petrol supply if the saw is so equipped,

What gasoline for the chainsaw?

Description : Or does it matter?

Last Answer : well according to the instructions of the saw I give NATURAL 95 + 1:33 M2AD OILS so a small shot of oil is enough for a pint of petrol

If a handsaw does the same amount of work as a chainsaw doeswhich has more power?

Description : If a handsaw does the same amount of work as a chainsaw doeswhich has more power?

Last Answer : Need answer

What is the fuel mix ratio for a 1985 poulan 16 chainsaw?

Description : What is the fuel mix ratio for a 1985 poulan 16 chainsaw?

Last Answer : Need answer

What is the smallest one-hand-operated, used for woodcarving, electric chainsaw made?

Description : What is the smallest one-hand-operated, used for woodcarving, electric chainsaw made?

Last Answer : We don't know. That is why we asked you to answer the question

Is a gas chainsaw better than an electric?

Description : Is a gas chainsaw better than an electric?

Last Answer : Gas chain saws are normally heavy duty and are heavy to handle, but they are only choice where there is no electricity. For larger commercial operations gas chain saws is only option. For smaller operations electrical chain saws are more preferred.

Chainsaw?

Description : Chainsaw?

Last Answer : form_title=Chain Saw form_header=A chain saw takes care and planning to operate, so let us ensure that you've got the right kind for the project at hand! What size chain saw are you interested in?*= _ [50] ... there a certain brand of chain saw you're interested in? If so, please tell us.*= _ [50]

How to choose a chainsaw?

Description : How to choose a chainsaw?

Last Answer : The saw is an indispensable tool in the household, especially for gardeners and owners of their own homes. It is needed everywhere - from cutting trees and preparing firewood to building various gazebos. ... cheaper than on electricity. And in terms of ease of use, it is somewhat more convenient.

“A nightingale’s song can be louder than a chainsaw.”

Description : “A nightingale’s song can be louder than a chainsaw.”  

Last Answer : Nightingales use their powerful lungs to sing at up to 95 decibels – louder than most construction work.

If a jogger runs 22 miles/hour for five hours. How far did the runner run in five hours?

Description : If a jogger runs 22 miles/hour for five hours. How far did the runner run in five hours?

Last Answer : 110 miles

During the summer, if I work 20 hours a week, with 6.50 an hour, for 2 months, how much Money would I earn with the taxes deducted?

Description : During the summer, if I work 20 hours a week, with 6.50 an hour, for 2 months, how much Money would I earn with the taxes deducted?

Last Answer : it depends on where you live and how your taxes are setup like how many dependents or if you’re exempt or not. If you’re a full time student you can be exempt from taxes. But why would you work for 6.50 an hour? That’s like nothing. I think minimum wage is 7.25 here in MA

If you have two jobs. One job pays 7 per hour and the other pays 8.25 per hour. You worked 22 hours total last week and earned 171.50. How many hours did you work at each job?

Description : If you have two jobs. One job pays 7 per hour and the other pays 8.25 per hour. You worked 22 hours total last week and earned 171.50. How many hours did you work at each job?

Last Answer : You can create simultaneous equations : 2 equations that whensolved will give your answerNeed to calculate 7a + 8.25b = 171.50 ( this calculates thepay)and a + b = 22 (the amount of hours worked )a is ... job the person worked 14 hours and therefore inthe 1st job the person worked 8 hours (= 22-14).

How many hours to travel 1200 miles at 50 miles per hour?

Description : How many hours to travel 1200 miles at 50 miles per hour?

Last Answer : What is the answer ?

During September, 300 labour hours were worked for a total cost of Rs 4800. The variable overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Description : During September, 300 labour hours were worked for a total cost of Rs 4800. The variable  overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour  hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Last Answer : (a) Rs 14

During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The  labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Last Answer : (d) 18,700

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Ravi walks to and fro to a Gym. He spends 30 minutes in gym. If he walks at speed of 20 km an hour, he returns to home at 8.00 a.m. If he walks at 30 km an hour, he returns to home at 7.30 a.m. How fast must he walk in order to return at 7.15 hours? a) 40 km/hr b) 30 km/hr c) 60 km/hr d) 50 km/hr

Description : Ravi walks to and fro to a Gym. He spends 30 minutes in gym. If he walks at speed of 20 km an hour, he returns to home at 8.00 a.m. If he walks at 30 km an hour, he returns to home at 7.30 a.m. How fast must he walk in order to return at 7.15 hours? a) 40 km/hr b) 30 km/hr c) 60 km/hr d) 50 km/hr

Last Answer :  A As per the question, let D be the total distance and ‘t’ is the time taken. So we have: D=20t 20t =30(t-0.5) 20t=30t-15 10t=15 t=3/2 D= 30 km Now, for the condition given we have: 30=S(t-3/4) 30=S(3/2-3/4) 30=S((6-3)/4) 30=S(3/4) S=40 km/hr

What is the btu hour output of an electric heater rated at 15 kilowatts?

Description : What is the btu hour output of an electric heater rated at 15 kilowatts?

Last Answer : Feel Free to Answer

In the illustrated circuit the voltage is 12 VDC and the resistance is 3 ohms. If the battery is rated for 120 amp-hours, how long before the voltage will drop to 1.75 volts per cell? EL-0018 A. 12 hours B. 1.75 days C. 30 hours D. 2.5 days

Description : In the illustrated circuit the voltage is 12 VDC and the resistance is 3 ohms. If the battery is rated for 120 amp-hours, how long before the voltage will drop to 1.75 volts per cell? EL-0018 A. 12 hours B. 1.75 days C. 30 hours D. 2.5 days

Last Answer : Answer: C

Electric motors intended for use outside the engine room and boiler room are frequently rated to run at a designed ambient temperature of 40°C. What is the equivalent temperature in degrees Fahrenheit? A. 54.2°F B. 72.0°F C. 104.0°F D. 129.6°F

Description : Electric motors intended for use outside the engine room and boiler room are frequently rated to run at a designed ambient temperature of 40°C. What is the equivalent temperature in degrees Fahrenheit? A. 54.2°F B. 72.0°F C. 104.0°F D. 129.6°F

Last Answer : Answer: C

A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm

Description : A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm for some time. Which speed control will be desirable? A) Ward Leonard control B) Armature ... ) Field resistance control D) It is not possible to run the motor at more than the rated rpm 

Last Answer : A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm for some time. Which speed control will be desirable? A) Ward Leonard control B) Armature ... Field resistance control D) It is not possible to run the motor at more than the rated rpm 

When a given transformer is run at its rated voltage but reduced frequency, its?

Last Answer : When a given transformer is run at its rated voltage but reduced frequency, its core flux density is increased.

A time budget is an estimate of the total hours an audit is expected to take. The following are among the factors to be considered in developing this budget, except a. Client's size as indicated by its gross assets, sales, number of employees. b. Location of client facilities. c. The competence and experience of available staff. d. Whether the audit is performed during the interim or at year-end.

Description : A time budget is an estimate of the total hours an audit is expected to take. The following are among the factors to be considered in developing this budget, except a. Client's size as indicated ... experience of available staff. d. Whether the audit is performed during the interim or at year-end.

Last Answer : Whether the audit is performed during the interim or at year-end.

If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, diarrhea, and fatigue. With high-dose radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

Description : If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? ... prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure.

Last Answer : a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, ... radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform a 'high pot' test to determine the condition of the insulation C. water wash the motor and controller to remove any salt that may interfere with smooth operation D. check run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Description : If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform ... run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Last Answer : Answer: D

A series mode crystal is marked 10.000 MHz., It is used in a circuit that operates the crystal in its parallel mode. The circuit can be expected to A) Run below 10 MHz B) Run at 10 MHz C) Run above 10 MHz D) Not oscillate.

Description : A series mode crystal is marked 10.000 MHz., It is used in a circuit that operates the crystal in its parallel mode. The circuit can be expected to A) Run below 10 MHz B) Run at 10 MHz C) Run above 10 MHz D) Not oscillate.

Last Answer : C) Run above 10 MHz

Five jobs A, B, C, D and E are waiting in Ready Queue. Their expected runtimes are 9, 6, 3, 5 and x respectively. All jobs entered in Ready queue at time zero. They must run in ............. order to minimize average response time if 3 < x < 5. (A) B, A, D, E, C (B) C, E, D, B, A (C) E, D, C, B, A (D) C, B, A, E, D

Description : Five jobs A, B, C, D and E are waiting in Ready Queue. Their expected runtimes are 9, 6, 3, 5 and x respectively. All jobs entered in Ready queue at time zero. They must run in ............. order to minimize average response time if 3 < ... , C (B) C, E, D, B, A (C) E, D, C, B, A (D) C, B, A, E, D

Last Answer : (B) C, E, D, B, A

Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V and internal resistance 10 `Omega`

Description : Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V and internal resistance 10 `Omega`

Last Answer : Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V ... power, is A. 6 B. 4 C. 2 D. 8

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Description : Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Last Answer : Ans: 47.7

A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Description : A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : Ans: B N = NS (1-S) and NS =120 f / p =120 x 50 /4 = 1500 rpm ∴N= 1500 (1-0.02) =1470 rpm

A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Description : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Last Answer : (D) 75 r.p.m.

The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open

Description : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the ... frequency of induced voltage across slip ring is A) 30 Hz B) 70 Hz C) 20 Hz D) 35 Hz

Last Answer : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the normal direction, The frequency of induced voltage across slip ring is 70 Hz

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven

Description : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output powers ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

Last Answer : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A 

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA.

Description : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Last Answer : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is 80 MJ

A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a...

Description : A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of: (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : 1470rpm

If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is A. 100 cm B. 90 cm C. 80 cm D. 50 cm

Description : If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is A. 100 cm B. 90 cm C. 80 cm D. 50 cm

Last Answer : ANS: A

The expected discharge to be obtained from an open well sunk in coarse sand is 0.0059 cumec. If the working depression head of the well is 3 m, the minimum diameter of the well, is (A) 2 m (B) 2.25 m (C) 2.50 m (D) 3.00 m

Description : The expected discharge to be obtained from an open well sunk in coarse sand is 0.0059 cumec. If  the working depression head of the well is 3 m, the minimum diameter of the well, is  (A) 2 m  (B) 2.25 m  (C) 2.50 m  (D) 3.00 m 

Last Answer : (D) 3.00 m 

The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Description : The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Last Answer : (B) 1.25 m3

If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Description : If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Last Answer : (A) 2.3% and 84.1%

I'm looking for exotic mixing of ASMR meditation sounds of 1 hour, 10 hours, or of other length. What do you suggest?

Description : I'm looking for exotic mixing of ASMR meditation sounds of 1 hour, 10 hours, or of other length. What do you suggest?

Last Answer : Mix in some diy trepanning for oxygenation.

What's the biggest challenge facing minimum wage workers in America today? Low wage per hour or low hours per week?

Description : What's the biggest challenge facing minimum wage workers in America today? Low wage per hour or low hours per week?

Last Answer : answer:There's another issue happening at big box stores and corporate chains. To keep labor costs low, managers use forecasting software to write schedules. So if the software says you can only have 20 ... , entry-level service jobs. I think it's this century's version of Gilded Era factory work.

Besides EARTH HOUR, do you think some other HOURS could be introduced to make a difference or a statement about various world issues?

Description : Besides EARTH HOUR, do you think some other HOURS could be introduced to make a difference or a statement about various world issues?

Last Answer : answer:A wine and no Fois Gras hour. Save the geese!

A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Description : A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Last Answer : a. Less than 3.6 km/hour

An alarm clock runs 4 minutes slow every hour. It was set right 3 1/2 hours ago. Now another clock which is correct shows noon. In how many minutes, to the nearest minutes, to the nearest minute, will the alarm clock show noon? -Riddles

Description : An alarm clock runs 4 minutes slow every hour. It was set right 3 1/2 hours ago. Now another clock which is correct shows noon. In how many minutes, to the nearest minutes, to the nearest minute, will the alarm clock show noon? -Riddles

Last Answer : In 3 1/2 hours the alarm clock has become 14 minutes slow. At noon the alarm clock will fall behind approximently an additional minute. Its hands will show noon in 15 minutes.

Lazy Larry agreed to work on a job for his brother-in-law for thirty hours at eight dollars an hour, on the condition that he would forfeit ten dollars per hour for every hour that he idled. At the end of the thirty hours Larry wasn't owed any money and didn't owe his brother-in-law any money either. How many hours did Larry work and how many hours did he idle? -Riddles

Description : Lazy Larry agreed to work on a job for his brother-in-law for thirty hours at eight dollars an hour, on the condition that he would forfeit ten dollars per hour for every hour that he idled. At the ... -in-law any money either. How many hours did Larry work and how many hours did he idle? -Riddles

Last Answer : Lazy Larry worked 16-2/3 hours and idled 13-1/3 hours. 16-2/3 hours, at $8.00 an hour amounts to the same amount as 13-1/3 hours at $10.00 per hour.