What is the difference between a manual and an automatic switch?

What is the difference between a manual and an automatic  switch?
by

1 Answer

Answer :

A manual switch must be turned on or off by a person. An  automatic switch turns a circuit on or off without the action of a person
by

Related questions

What is the difference between manual and automatic feed during turning

Description : Is not asked

Last Answer : In manual feed turning, the operator manually controls the feed rate of the cutting tool by turning a handwheel or other manual feed mechanism. This allows the operator to adjust the feed rate ... hand, is generally faster and more consistent, but it requires more complex equipment and programming.

What is one example of a manual switch?

Description : What is one example of a manual switch?

Last Answer : A light switch, an ignition switch, television channel selector, etc.

What is one example of an automatic switch?

Description : What is one example of an automatic switch?

Last Answer : A thermostat, an automobile distributor, a limit switch, etc.

Should the rev matching feature on the Nissan 370Z's manual gearbox have been put on the automatic instead? Why?

Description : Should the rev matching feature on the Nissan 370Z's manual gearbox have been put on the automatic instead? Why?

Last Answer : What do you mean? Syncro-mesh? That’s not exactly an exotic feature, and why would an automatic need it?

How to check that the watch is automatic or manual?

Description : How to check that the watch is automatic or manual?

Last Answer : To check the clock is automatic or manual. checking for text imprinted on its dial of case back. but there are also visual cues. If you observe the actual movements of watch, automatic movements are jumpier and move once every second while manual have a smooth sweeping motion.

Does the STI WRX come in both manual and automatic transmission?

Description : Does the STI WRX come in both manual and automatic transmission?

Last Answer : The STI, which is a version of the Subaru Impreza WRX, only comes with manual transmission. The normal Impreza WRX does come in both versions, just not the STI model

Does the manual Express Machine have the ability to make as much Express as the Super-Automatic?

Description : Does the manual Express Machine have the ability to make as much Express as the Super-Automatic?

Last Answer : Manual Express espresso machines tend to have 3 to 6 cup capacities, while Super-Automatic machines can typically brew 7 to 8 cups.

What does it mean when a freezer says Manual Defrost and Automatic Defrost?

Description : What does it mean when a freezer says Manual Defrost and Automatic Defrost?

Last Answer : Manual defrost is the instructions for you to manually defrost your freezer and automatic defrost is saying the freezer defrost on it's own.

The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to automatic/zero droop C. enable the operator to read the field voltage on device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Description : The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to ... device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Last Answer : Answer: A

What is an advantage of using bid rules? A. Full automation of your bidding B. Automation of your manual bid process C. Automatic application of phone call data to your bidding D. Receive bid assistance based upon the likelihood of a conversi

Description : What is an advantage of using bid rules? A. Full automation of your bidding B. Automation of your manual bid process C. Automatic application of phone call data to your bidding D. Receive bid assistance based upon the likelihood of a conversi

Last Answer : B. Automation of your manual bid process

Which of the following statement is true about virtualization technology? A. Allows manual provisioning of environments. B. Administrationsoftware constantly monitors the software. C. Save energy by powering off the servers. D. Allows automatic deployment of applications.

Description : Which of the following statement is true about virtualization technology? A. Allows manual provisioning of environments. B. Administrationsoftware constantly monitors the software. C. Save energy by powering off the servers. D. Allows automatic deployment of applications.

Last Answer : Allows automatic deployment of applications.

The deliberate action of the government to stabilize the economy, as opposed to the inherent automatic stabilizing properties of the fiscal system, is known as a) Forced fiscal policy b) Manual fiscal policy c) Discretionary fiscal policy d) Automatic fiscal policy

Description : The deliberate action of the government to stabilize the economy, as opposed to the inherent automatic stabilizing properties of the fiscal system, is known as a) Forced fiscal policy b) Manual fiscal policy c) Discretionary fiscal policy d) Automatic fiscal policy

Last Answer : c) Discretionary fiscal policy

Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool

Description : Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool

Last Answer : manual tool

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : A) Automatic allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

In the event of a power failure during cargo loading operations, the movement of an electric powered cargo winch will be stopped by ____________. A. a manual override switch B. the weight of the load on the boom C. a spring set brake D. a hand operated band brake

Description : In the event of a power failure during cargo loading operations, the movement of an electric powered cargo winch will be stopped by ____________. A. a manual override switch B. the weight of the load on the boom C. a spring set brake D. a hand operated band brake

Last Answer : Answer: C

When securing an AC generator, you should FIRST ___________. A. open the generator circuit breaker B. switch the voltage regulator to 'manual' C. decrease the field excitation to minimum D. reduce the load on the unit

Description : When securing an AC generator, you should FIRST ___________. A. open the generator circuit breaker B. switch the voltage regulator to 'manual' C. decrease the field excitation to minimum D. reduce the load on the unit

Last Answer : Answer: D

Prior to starting an AC generator prime mover, the voltage regulator cutout switch should be placed in the __________. A. manual position B. bus neutral position C. raise voltage position D. transfer position

Description : Prior to starting an AC generator prime mover, the voltage regulator cutout switch should be placed in the __________. A. manual position B. bus neutral position C. raise voltage position D. transfer position

Last Answer : Answer: A

What does manual gain control do to strong and weak signals, respectively?

Description : What does manual gain control do to strong and weak signals, respectively?

Last Answer : Attenuates the strong and amplifies the weak.

Does this kettle have an automatic off switch?

Description : Does this kettle have an automatic off switch?

Last Answer : It doesnt say anywhere in the description of the item that is has an automatic off switch but I myself bought one by the same maker a few months back and it did not come with an automatic off switch.

A diesel driven emergency generator is prevented from being paralleled with the ship's service generators by __________. A. an electrical interlock system B. an automatic paralleling trip switch C. the synchronizing oscilloscope D. the reverse current relay

Description : A diesel driven emergency generator is prevented from being paralleled with the ship's service generators by __________. A. an electrical interlock system B. an automatic paralleling trip switch C. the synchronizing oscilloscope D. the reverse current relay

Last Answer : Answer: A

When paralleling two AC generators, the frequency of the incoming machine immediately prior to closing its breaker should be ____________. A. controlled by placing the governor switch in the automatic position B. adjusted with the voltage regulator C. slightly greater than the bus frequency D. slightly less than the bus frequency

Description : When paralleling two AC generators, the frequency of the incoming machine immediately prior to closing its breaker should be ____________. A. controlled by placing the governor switch in the automatic ... regulator C. slightly greater than the bus frequency D. slightly less than the bus frequency

Last Answer : Answer: C

Equal power factors on paralleled AC generators are maintained by an automatic _____________. A. voltage regulator B. reverse power relay C. reverse current relay D. governor control switch

Description : Equal power factors on paralleled AC generators are maintained by an automatic _____________. A. voltage regulator B. reverse power relay C. reverse current relay D. governor control switch

Last Answer : Answer: A

A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Description : A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Last Answer : Answer: B

Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?

Description : Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?

Last Answer : IAGC.

What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Description : What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Last Answer : It will overheat and could burn the insulation of the wire being soldered.

What type of bias makes a diode act as a closed switch?

Description : What type of bias makes a diode act as a closed switch?

Last Answer : Forward bias.

If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Description : If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Last Answer : Between point (3) and the gas gauge tank unit ground.

What device is used to switch power from the normal source to an alternate source for nonvital users?

Description : What device is used to switch power from the normal source to an alternate source for nonvital users?

Last Answer : What device is used to switch power from the normal source to an alternate source for nonvital users?

When cleaning the parts of a tape transport, why should you switch lint-free cloths and swabs often?

Description : When cleaning the parts of a tape transport, why should you switch lint-free cloths and swabs often?

Last Answer : You may transfer dirt or oxide particles from one part of the tape transport to another

If a switch must be checked with power applied, what type of meter is used?

Description : If a switch must be checked with power applied, what type of meter is used?

Last Answer : A voltmeter.

What two types of meters can be used to check a switch?

Description : What two types of meters can be used to check a switch?

Last Answer : An ohmmeter and a voltmeter.

What is the voltage rating of a switch?

Description : What is the voltage rating of a switch?

Last Answer : The maximum voltage allowable in the circuit in which the switch is installed.

What is the current rating of a switch?

Description : What is the current rating of a switch?

Last Answer : The maximum current a switch is designed to carry.

What is the common name used for an accurate snap acting switch?

Description : What is the common name used for an accurate snap acting switch?

Last Answer : A microswitch.

What type of switch is used if it is necessary to guard against a circuit being accidentally turned

Description : What type of switch is used if it is necessary to guard against a circuit being accidentally turned

Last Answer : A locked-position switch.

What type of switch should be used to control a circuit that requires a temporary actuation signal?

Description : What type of switch should be used to control a circuit that requires a temporary actuation signal?

Last Answer : A momentary switch.

In describing a switch by the number of positions of the actuator, what are the two possible configurations for a single pole, double-throw switch?

Description : In describing a switch by the number of positions of the actuator, what are the two possible configurations for a single pole, double-throw switch?

Last Answer : Two-position and three-position.

What classification of a switch is used when you describe it as a rocker switch?

Description : What classification of a switch is used when you describe it as a rocker switch?

Last Answer : The type of actuator.

What is the difference between manual library system and automated library system? -Technology

Description : What is the difference between manual library system and automated library system? -Technology

Last Answer : In the manual library system, the library services are provided to the users without using computers as an intermediary. However, in the automated library system, the traditional library activities and library services are completely mechanized.

What is the difference between electric and manual treadmills?

Description : What is the difference between electric and manual treadmills?

Last Answer : A manual treadmill takes no electricity and uses resistance. The person running on it makes it work. Electric moves at set speeds by motor.

What is the difference between an auto reset and manual reset overload relay?

Description : What is the difference between an auto reset and manual reset overload relay?

Last Answer : a. Auto reset relay closes its contacts when the bimetallic strip gets cooled. In manual reset relay we have to manually reset the relay because even though bimetallic strip cools its contacts are not ... . Manual over load relay is reseted by pushing the reset button provided on the MCC cell.