What are three types of nonmetallic insulating materials that can be used in a high-temperature environments?

What are three types of nonmetallic insulating materials  that can be used in a high-temperature environments?
by

1 Answer

Answer :

FEP, extruded polytetrafluoroethylene, and silicone rubber.
by

Related questions

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

State two fundamental properties of insulating materials.

Description : State two fundamental properties of insulating materials.

Last Answer : Insulation resistance and dielectric strength.

What is the most common type of nonmetallic material used to protect wires and cables?

Description : What is the most common type of nonmetallic material used to protect wires and cables?

Last Answer : Fibrous Braid.

How many categories of nonmetallic protective coverings are there?

Description : How many categories of nonmetallic protective coverings are there?

Last Answer : Three

What are the physical properties of nonmetallic materials?

Description : What are the physical properties of nonmetallic materials?

Last Answer : Need answer

What is the temperature coefficient of insulating materials?

Description : What is the temperature coefficient of insulating materials?

Last Answer : Insulators are negative temperature coefficient materials.

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Classify the insulating materials as per operating temperature. Give two examples of each type.

Description : Classify the insulating materials as per operating temperature. Give two examples of each type.

Last Answer : Sr.No.  Insulation Classes  Maximum permissible temperature (0C) Insulating Material 1 Class-Y or O  900 Cotton, silk, paper, press board, wood, cellulose-, PVC, VIR. (Cotton, silk, ... adhesive coating.  7 Class- C  Over 1800 Porcelain, ceramics, glass, quartz. 

Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Description : Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Last Answer : (B) High proportion of air space

State what happens to the insulating characteristics of asbestos when it gets wet.

Description : State what happens to the insulating characteristics of asbestos when it gets wet.

Last Answer : It will become a conductor.

Give reason: Silicones used as insulating materials.

Description : Give reason: Silicones used as insulating materials.

Last Answer : Unlike common organic polymers, silicones do not catch fire. Hence they are used in fire proof suits and insulating material.

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Description : The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Description : Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Last Answer : (A) Insulating materials.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

State various thermal insulating materials. State any two properties of insulating material

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

What are the properties of sound insulating materials?

Description : What are the properties of sound insulating materials?

Last Answer : Properties of sound insulating materials: 1. It should be light in weight 2. Easy to handle and fix 3. It should be resistant to attack termite and insect 4. It should have low density and porous texture 5. It should be fire resistance 6. It should be moisture resistance

State the Properties of thermal insulating materials.

Description : State the Properties of thermal insulating materials.

Last Answer : Properties of thermal insulating materials: 1) Thermal insulating should be bio resistant and dry. 2) Thermal resistant should be chemically resistant and fire proof. 3) Thermal resisting ... in the moisture content in the material, the coefficient of thermal conductivity rises greatly.

Enlist the different sound insulating materials and also state their suitability.

Description : Enlist the different sound insulating materials and also state their suitability. 

Last Answer : Different sound insulating materials: 1) Asbestos , 2) rock wool , 3)glass ,4)silk, 5)Han felt 6) Mineral wool boards, 7)cane fibers. 8) Acoustical plaster boards and tiles 9 ... tiles and acoustic plaster are suitable where absorption of sound required from tile to tile should be uniform.

State situations where sound insulating and damp proofing materials are used.

Description : State situations where sound insulating and damp proofing materials are used. 

Last Answer : Situations where sound insulating materials are used: 1) Glass, mineral wool mats, are used as sound insulators as solid inner layers underneath floors, 2) Wood fibre and asbestos cement slabs are used ... in toilet floors of upper story, so that no dampness will occur in slab below that floor.

State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Description : State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Last Answer : i) Suitability of water proofing materials: 1. Concrete, Bricks, Stones, plaster have tendency to get deteriorate, hence leakage of water may occur in slab, beam, columns. Bitumen and tars ... noise. 6) Acoustic tiles and acoustic plaster are suitable where absorption of sound is required.

State any two electrical, mechanical and thermal properties of insulating materials.

Description : State any two electrical, mechanical and thermal properties of insulating materials. 

Last Answer : i) Electrical Properties of insulating material:- 1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high dielectric strength. 4. It should have low ... . 4. Ii should have thermal Stability. 5. Co-efficient of thermal expansion should be low.

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State properties of insulating materials.

Description : State properties of insulating materials.

Last Answer : (i) Resistivity should be very high. (ii) It should be water resistant. (iii) It should not contain impurities. (iv) It should not be affected chemically and not corroded easily. (v) Its ... It should be mechanically strong (tensile strength should be more). (vii) It should not be porous.

Explain the mechanical properties of insulating materials.

Description : Explain the mechanical properties of insulating materials.

Last Answer : i) Mechanical strength: Mechanical strength depends on temperature and humidity. a) Temperature: High temperature badly affects the mechanical strength of insulating material. While selecting material ... material should have property of easy moulding and machined into required shape and size.

Give classification of insulating materials on the basis of state of material and give one application of each.

Description : Give classification of insulating materials on the basis of state of material and give one application of each.

Last Answer : Classification of Insulating material State of material   Application Solid insulating materials Wood, rubber, plastic, PVC, glass, porcelain, mica, Polypropylene film etc.   ... Switchgears, gas pressures cables, circuit breakers, generator cooling systems and X-ray apparatus

The electric breakdown strength of insulating materials depends on

Description : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Last Answer : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Effect of moisture on the insulating materials is to

Last Answer : Effect of moisture on the insulating materials is to decrease dielectric constant, decrease dielectric strength, decrease insulation resistance, increase dielectric loss.

Insulating materials have the function of?

Description : Insulating materials have the function of?

Last Answer : Insulating materials have the function of preventing an open circuit between the voltage source and the load.

Is sulfur a nonmetallic?

Description : Is sulfur a nonmetallic?

Last Answer : yes think so

In terms of valence electrons what is the different between metallic elements and nonmetallic elements?

Description : In terms of valence electrons what is the different between metallic elements and nonmetallic elements?

Last Answer : Feel Free to Answer

What is the valve 1919 wheat penny nonmetallic?

Description : What is the valve 1919 wheat penny nonmetallic?

Last Answer : Feel Free to Answer

What physical characteristics of gypsum can be described as nonmetallic?

Description : What physical characteristics of gypsum can be described as nonmetallic?

Last Answer : luster

How do atoms of nonmetallic elements generally form ions?

Description : How do atoms of nonmetallic elements generally form ions?

Last Answer : Non metals usually form ions by gaining electrons to becomeanions (negatively charged ions).

Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should never be grounded. C. Electrical cables must be rigidly held in place by welding of armored cable, or glued in place where nonmetallic insulation is used. D. All of the above.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. Apply anti-static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Last Answer : A. Apply shielding and filtering where necessary

Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Description : Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Last Answer : guided orunguided

Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Of the nonmetallic elements the one least likely to be found in organic compounds is: w) nitrogen x) phosphorus y) chlorine z) selenium

Description : Of the nonmetallic elements the one least likely to be found in organic compounds is: w) nitrogen x) phosphorus y) chlorine z) selenium

Last Answer : ANSWER: Z -- SELENIUM

Consider the following four conditions (1 - 4) and select a correct pair of them as adaptations to environment in desert lizards. Conditions: 1. Burrowing in soil to escape high temperature. 2. Losing heat rapidly from the body during high temperature. 3. Bask in sun when temperature is low. 4. Insulating body due to thick fatty dermis. (a) 3, 4 (b) 1, 3 (c) 2, 4 (d) 1, 2

Description : Consider the following four conditions (1 - 4) and select a correct pair of them as adaptations to environment in desert lizards. Conditions: 1. Burrowing in soil to escape high temperature. 2. Losing heat rapidly from the body during ... to thick fatty dermis. (a) 3, 4 (b) 1, 3 (c) 2, 4 (d) 1, 2

Last Answer : (b) 1, 3

The unifying feature of the archaea that distinguishes them from the bacteria is A- habitats which are extreme environments with regard to acidity B- absence of a nuclear membrane temperature C- presence of a cell wall containing a characteristic outer membrane D- cytoplasmic ribosomes that are 70S

Description : The unifying feature of the archaea that distinguishes them from the bacteria is A- habitats which are extreme environments with regard to acidity B- absence of a nuclear membrane temperature ... of a cell wall containing a characteristic outer membrane D- cytoplasmic ribosomes that are 70S

Last Answer : absence of a nuclear membrane temperature

Compared to terrestrial environments, aquatic environments are more stable in: w) temperature range x) producer consumer distribution y) sunlight absorbed z) number species

Description : Compared to terrestrial environments, aquatic environments are more stable in: w) temperature range x) producer consumer distribution y) sunlight absorbed z) number species 

Last Answer : ANSWER: W -- TEMPERATURE RANGE

List the types of materials used in fabricating low-loss, long wavelength optical fibers.

Description : List the types of materials used in fabricating low-loss, long wavelength optical fibers.

Last Answer : Heavy-metal fluorides, chalcogenide glasses, and crystalline materials.

Which of the following is not one of three software product aspects addressed by McCall's software quality factors? (1) Ability to undergo change. (2) Adaptability to new environments. (3) Operational characteristics (4) Production costs and scheduling

Description : Which of the following is not one of three software product aspects addressed by McCall's software quality factors? (1) Ability to undergo change. (2) Adaptability to new environments. (3) Operational characteristics (4) Production costs and scheduling

Last Answer : Answer: 4

Magnetic tape is made of what three basic materials?

Description : Magnetic tape is made of what three basic materials?

Last Answer : a. Base material. b. Coating of magnetic oxide particles. c. Glue that bonds the particles to the base.