State what happens to the insulating characteristics of asbestos when it gets wet.

State what happens to the insulating characteristics of  asbestos when it gets wet.
by

1 Answer

Answer :

It will become a conductor.
by

Related questions

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Description : Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Last Answer : (D) 85% magnesia cement and glass wool

State two fundamental properties of insulating materials.

Description : State two fundamental properties of insulating materials.

Last Answer : Insulation resistance and dielectric strength.

State the reasons that the Navy is getting away from the use of asbestos insulation.

Description : State the reasons that the Navy is getting away from the use of asbestos insulation.

Last Answer : Breathing asbestos fibers can cause lung disease and/or cancer

What are three types of nonmetallic insulating materials that can be used in a high-temperature environments?

Description : What are three types of nonmetallic insulating materials that can be used in a high-temperature environments?

Last Answer : FEP, extruded polytetrafluoroethylene, and silicone rubber.

What happens insulators when high voltage passes through transmission lines whether it breaks or lose it's insulating property?

Description : What happens insulators when high voltage passes through transmission lines whether it breaks or lose it's insulating property?

Last Answer : I think it will breaks when it crosses breakdown voltage .

What gets wet the more it dries? -Riddles

Description : What gets wet the more it dries? -Riddles

Last Answer : A towel.

What gets wet while drying? -Riddles

Description : What gets wet while drying? -Riddles

Last Answer : A towel gets wet while drying.

What forms when iron gets wet and reacts with oxygen?

Description : What forms when iron gets wet and reacts with oxygen?

Last Answer : rust

What forms when iron gets wet and reacts with oxygen?

Description : What forms when iron gets wet and reacts with oxygen?

Last Answer : rust

Approximately how often should you clean a floppy disk drive that gets heavy use?

Description : Approximately how often should you clean a floppy disk drive that gets heavy use?

Last Answer : Once a month

State four characteristics of electrostatic lines of force

Description : State four characteristics of electrostatic lines of force

Last Answer : a charged particle in straight lines and do not form closed loops. c. They have the ability to pass through any known material. d. They have the ability to distort the orbits of electrons circling the nucleus.

State four characteristics of electrostatic lines of force

Description : State four characteristics of electrostatic lines of forceNEETS

Last Answer : a. They are polarized from positive to negative. b. They radiate from a charged particle in straight lines and do not form closed loops. c. They have the ability to pass through any known material. d. They have the ability to distort the orbits of electrons circling the nucleus.

Which is the chief characteristics of wet and dry tropics? -General Knowledge

Description : Which is the chief characteristics of wet and dry tropics? -General Knowledge

Last Answer : The answer is 'Constant heating'

Which is the chief characteristics of wet and dry tropics? -General Knowledge

Description : Which is the chief characteristics of wet and dry tropics? -General Knowledge

Last Answer : answer:

Which is the chief characteristics of wet and dry tropics? -General Knowledge

Description : Which is the chief characteristics of wet and dry tropics? -General Knowledge

Last Answer : answer:

Which is the chief characteristics of wet and dry tropics?

Description : Which is the chief characteristics of wet and dry tropics?

Last Answer : Constant heating

State various thermal insulating materials. State any two properties of insulating material

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

State the Properties of thermal insulating materials.

Description : State the Properties of thermal insulating materials.

Last Answer : Properties of thermal insulating materials: 1) Thermal insulating should be bio resistant and dry. 2) Thermal resistant should be chemically resistant and fire proof. 3) Thermal resisting ... in the moisture content in the material, the coefficient of thermal conductivity rises greatly.

Enlist the different sound insulating materials and also state their suitability.

Description : Enlist the different sound insulating materials and also state their suitability. 

Last Answer : Different sound insulating materials: 1) Asbestos , 2) rock wool , 3)glass ,4)silk, 5)Han felt 6) Mineral wool boards, 7)cane fibers. 8) Acoustical plaster boards and tiles 9 ... tiles and acoustic plaster are suitable where absorption of sound required from tile to tile should be uniform.

State situations where sound insulating and damp proofing materials are used.

Description : State situations where sound insulating and damp proofing materials are used. 

Last Answer : Situations where sound insulating materials are used: 1) Glass, mineral wool mats, are used as sound insulators as solid inner layers underneath floors, 2) Wood fibre and asbestos cement slabs are used ... in toilet floors of upper story, so that no dampness will occur in slab below that floor.

State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Description : State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Last Answer : i) Suitability of water proofing materials: 1. Concrete, Bricks, Stones, plaster have tendency to get deteriorate, hence leakage of water may occur in slab, beam, columns. Bitumen and tars ... noise. 6) Acoustic tiles and acoustic plaster are suitable where absorption of sound is required.

State any two electrical, mechanical and thermal properties of insulating materials.

Description : State any two electrical, mechanical and thermal properties of insulating materials. 

Last Answer : i) Electrical Properties of insulating material:- 1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high dielectric strength. 4. It should have low ... . 4. Ii should have thermal Stability. 5. Co-efficient of thermal expansion should be low.

State any two applications of gaseous insulating material used in switchgears.

Description : State any two applications of gaseous insulating material used in switchgears. 

Last Answer : Applications of gaseous insulating material used in switchgears:   1. Non inflammable material (gas) in switchgear. 2. High dielectrical strength material in electrical machine. 3. As a cooling agent in circuit breaker

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State gaseous and liquid insulating material.

Description : State gaseous and liquid insulating material.

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids

State properties of insulating materials.

Description : State properties of insulating materials.

Last Answer : (i) Resistivity should be very high. (ii) It should be water resistant. (iii) It should not contain impurities. (iv) It should not be affected chemically and not corroded easily. (v) Its ... It should be mechanically strong (tensile strength should be more). (vii) It should not be porous.

State the temperature with standing capacity of following class-insulating material class Y, class A, class B, class E. Also state two examples for each.

Description : State the temperature with standing capacity of following class-insulating material class Y, class A, class B, class E. Also state two examples for each.

Last Answer : S.No Class of Insulating material Temperature withstanding capacity 0C  Examples 1 Class Y' 900C Cotton, Silk paper and similar organic materials neither impregnated nor ... E' 1200C  Cotton fabric, synthetic resin enamels. Paper laminates and Powder plastics

Give classification of insulating materials on the basis of state of material and give one application of each.

Description : Give classification of insulating materials on the basis of state of material and give one application of each.

Last Answer : Classification of Insulating material State of material   Application Solid insulating materials Wood, rubber, plastic, PVC, glass, porcelain, mica, Polypropylene film etc.   ... Switchgears, gas pressures cables, circuit breakers, generator cooling systems and X-ray apparatus

state what happens to the electrons in a capacitor circuit when (a) the capacitor is charging and (b) the capacitor is discharging.

Description : state what happens to the electrons in a capacitor circuit when (a) the capacitor is charging and (b) the capacitor is discharging.

Last Answer : a. When the capacitor is charging, electrons accumulate on the negative plate and leave the positive plate until the charge on the capacitor is equal to the battery voltage. b. When the ... the negatively charged plate to the positively charged plate until the charge on each plate is neutral.

What happens if my batteries get wet?

Description : What happens if my batteries get wet?

Last Answer : Usually nothing serious, as long as they are not wet while operating.

What happens if I use my flat iron on wet hair- wouldn't that be a faster way to get my hair done?

Description : What happens if I use my flat iron on wet hair- wouldn't that be a faster way to get my hair done?

Last Answer : When you use a flat iron on wet hair you cause more damage to the hair. You are literally frying the hair. It takes longer because it will be drying the hair but not straightening it.

As a result of spinning sometimes one of the drive wheels of a tractor happens to meet a a) hard ground b) soft ground c) muddy gourd d ) wet ground.

Description : As a result of spinning sometimes one of the drive wheels of a tractor happens to meet a a) hard ground b) soft ground c) muddy gourd d ) wet ground.

Last Answer : b) soft ground

are there any city'gov or state programs that would remove asbestos from my home...?

Description : are there any city'gov or state programs that would remove asbestos from my home...?

Last Answer : It does not appear there are any state programs to help with the cost of asbestos abatement, however, Pennsylvania is appealing to the EPA to help cover costs. In the meantime, if you need help Servpro.com, an asbestos abatement company, is located in Pennyslvania.

State the uses of (i) Glass Fibres (ii) Asbestos Fibres.

Description : State the uses of (i) Glass Fibres (ii) Asbestos Fibres. 

Last Answer :  Uses of Glass Fibres : 1. Used as filter in air conditioners. 2. Used as fine aggregate for finishing plaster to reduce cracking. 3. Used with plastic to produce glass reinforced plastic (GRP), ... 5. It is used for thermal insulation work for pipe line. 6. Used in electrical insulation work.

At very high frequencies, what characteristics are displayed by ordinary insulators?

Description : At very high frequencies, what characteristics are displayed by ordinary insulators?

Last Answer : The characteristics of the dielectric of a capacitor.

What are the three basic characteristics of sound

Description : What are the three basic characteristics of sound

Last Answer : Pitch, intensity, and quality.

The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Description : The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Last Answer : Power and frequency.

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Description : The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Last Answer : Quarter-wavelength section

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Description : When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Last Answer : A standard capacitor

What five characteristics do applications using plastic clad silica (PCS) and all-plastic fibers typically have?

Description : What five characteristics do applications using plastic clad silica (PCS) and all-plastic fibers typically have?

Last Answer : High NA, low bandwidth, tight bend radius, short length, and low cost.

What are the most distinguishing characteristics of a multimode graded-index fiber?

Description : What are the most distinguishing characteristics of a multimode graded-index fiber?

Last Answer : Source-to-fiber coupling efficiency and insensitivity to microbending and macrobending losses.

When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

What characteristics do all ferromagnetic materials have in common?

Description : What characteristics do all ferromagnetic materials have in common?

Last Answer : The relative ease with which they are magnetized

What are the four basic receiver characteristics?

Description : What are the four basic receiver characteristics?

Last Answer : Sensitivity, noise, selectivity, and fidelity.