The source and drain of an N-channel JFET are made of what type of material?

The source and drain of an N-channel JFET are made of  what type of material?
by

1 Answer

Answer :

N-type material.
by

Related questions

What is the normal current path in an N-channel JFET?

Description : What is the normal current path in an N-channel JFET?

Last Answer : From source to drain.

While biasing JFET if drain and source are interchanged, then

Description : While biasing JFET if drain and source are interchanged, then (A) device will work normally (B) device will get damaged (C) device will work but value of drain current will affected (D) device will not operate at all

Last Answer : B

Draw the transfer characteristics for N-channel JFET.

Description : Draw the transfer characteristics for N-channel JFET.

Last Answer : Transfer characteristics for N-channel JFET: 

Sketch construction of N-channel JFET and explain its operating principle.

Description : Sketch construction of N-channel JFET and explain its operating principle.

Last Answer : Construction of N-channel JFET: Working of N channel FET: a)when VGS is zero,ID flows because of VDS b)Now when VGS increases towards negative, depletion layer also increases on both sides. c)so VGS control drain current ID d)so it is called as field effect Transistor

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Describe operation of N-channel JFET

Description : Describe operation of N-channel JFET

Last Answer : Operation of N-channel JFET  1) When VGS = 0 volt: When a voltage is applied between the drain and source with a DC supply voltage VDD with VGS = 0 V, the electrons flow from source ... to zero. The gate to source voltage at which current reduces to zero is called as pinch-off voltage.

In a JFET drain current is maximum when VGS is...

Description : In a JFET drain current is maximum when VGS is  (a) zero (b) negative (c) positive (d) equal to Vp

Last Answer : A

The substrate of an N-channel MOSFET is made of what material?

Description : The substrate of an N-channel MOSFET is made of what material?

Last Answer : P-type material.

When compared to the JFET, what is the input impedance of the MOSFET?

Description : When compared to the JFET, what is the input impedance of the MOSFET?

Last Answer : The MOSFET has a higher input impedance.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

What are the two types of JFET?

Description : What are the two types of JFET?

Last Answer : N-channel and P-channel.

Sketch p-channel JFET construction.

Description : Sketch p-channel JFET construction.

Last Answer : p- channel JFET constructional diagram:

The transit time of the current carriers through the channel of a JFET decides it's ?

Description : The transit time of the current carriers through the channel of a JFET decides it's?

Last Answer : The transit time of the current carriers through the channel of a JFET decides it's gate characteristics.

The voltage gain of a common -source JFET amplifier depends up on its

Description : The voltage gain of a common -source JFET amplifier depends up on its  (1) Input impedance (2) Amplification factor (3) Dynamic drain resistance (4) Drain load resistance

Last Answer : B

. In a MOSFET, which element is insulated from the channel material?

Description : . In a MOSFET, which element is insulated from the channel material?

Last Answer : The gate terminal.

Which of the following canal structures is used to remove surplus water from an irrigation channel into a natural drain? (A) Canal fall (B) Canal outlet (C) Canal escape (D) Canal regulator

Description : Which of the following canal structures is used to remove surplus water from an irrigation channel into a natural drain? (A) Canal fall (B) Canal outlet (C) Canal escape (D) Canal regulator

Last Answer : Answer: Option C

Draw the drain characteristics of p-channel FET and explain.

Description : Draw the drain characteristics of p-channel FET and explain.

Last Answer : Drain characteristics:- As VDS is increased from zero as shown , ID will increased proportionally through the p channel. In this region the channel resistance is constants because the depletion region is ... the depletion layer. (i.e. channel width zero) is called cutoff voltage or VGS(off).

In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Description : In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Last Answer : Minimum.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Description : The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Last Answer : E)medium of transmission.

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

Pinch off voltage of a J FET is the drain to source voltage above which drain current.

Description : Pinch off voltage of a J FET is the drain to source voltage above which drain current. • Increases • Decreases • Remains constant • Becomes zero

Last Answer : Pinch off voltage of a J FET is the drain to source voltage above which drain current Remains constant

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Description : The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Last Answer : Answer: D

Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Description : Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Last Answer : C. MESFET

The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Description : The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Last Answer : D. MESFET

Why JFET is called a unipolar transistor?

Description : Why JFET is called a unipolar transistor?

Last Answer : In JFET, the current conduction is either by electrons or holes and controlled by means of an electric field between the gate electrode and the conducting channel of the device, So it is called as a unipolar transistor.

What is the importance of JFET?

Description : What is the importance of JFET?

Last Answer : A JFET acts like a voltage controlled device i.e. input voltage controls the output current. This is different from ordinary transistor where input current controls the output current. JFET has higher input impedance than that of a conventional transistor.

What is pinch off voltage in JFET?

Description : What is pinch off voltage in JFET?

Last Answer : Pinch off voltage (VP): It is the minimum drain source voltage at which the drain current essentially becomes constant.

What is JFET?

Description : What is JFET?

Last Answer : A junction FET is a three terminal semiconductor device in which current conduction is by one type of carrier (i.e.) electrons or holes.

State 2 advantages of JFET over BJT.

Description : State 2 advantages of JFET over BJT.

Last Answer : Advantages of JFET over BJT: 1) High input impedance 2) Better thermal stability 3) Produce less noise 4) Smaller than BJT 5) Rugged in construction and simpler to fabricate 6) High degree of isolation between Input and Output. 

State advantages of MOSFET over JFET.

Description : State advantages of MOSFET over JFET.

Last Answer : ➨It can be operated in either enhancement mode or depletion mode. ➨MOSFET have much higher input impedance compare to JFET. ➨They have high drain resistance due to lower resistance of channel. ➨It is easy to manufacture. ➨They support high speed of operation compare to JFETs.

Compare JFET with MOSFET.

Description : Compare JFET with MOSFET.

Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Define junction field effect transistor (JFET) and give an example.

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

The transconductance of a JFET is computed at constant VDS by:

Description : The transconductance of a JFET is computed at constant VDS by: (1) Ratio of change in Idto change of Vgs (2) Ratio of change inVgs to change ofId (3) Product of change in Vgs to change of Id (4) Ratio of change in Vds to change of Id

Last Answer : The transconductance of a JFET is computed at constant VDS by: Ratio of change in Id to change of Vgs 

A depletion MOSFET differs from a JFET in the sense that it has no

Description : A depletion MOSFET differs from a JFET in the sense that it has no   (A) channel (B) gate (C) P-N junctions (D) substrate

Last Answer : A depletion MOSFET differs from a JFET in the sense that it has no P-N junctions 

A JFET has the disadvantage of

Description : A JFET has the disadvantage of  1. Having low input impedance 2. Having high output impedance 3. Having small gain band-width product 4. Possessing positive temperature coefficient

Last Answer : A JFET has the disadvantage of Having small gain band-width product

The operation of a JFET involves

Description : The operation of a JFET involves  (A) A flow of minority carriers (B) a flow 0f majority carriers (C) recombination (D) negative resistance

Last Answer : The operation of a JFET involves a flow 0f majority carriers 

JFET in properly biased condition acts as a: ...

Description : JFET in properly biased condition acts as a:  (1) Current controlled current source (2) Voltage controlled voltage source (3) Voltage controlled current source (4) Impedance controlled current source

Last Answer : JFET in properly biased condition acts as a: Voltage controlled current source.

For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Description : For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Last Answer : ANS: C

Consider the following statements : 1. In a super-passage, the drain runs over the canal 2. In a siphon, the drain runs below the canal 3. In a siphon aqueduct, type- II, the canal banks are made of RCC walls Which of these statements are correct ? a) 1 only b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements : 1. In a super-passage, the drain runs over the canal 2. In a siphon, the drain runs below the canal 3. In a siphon aqueduct, type- II, the canal banks are made of RCC walls Which of ... are correct ? a) 1 only b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

If a target is on the bearing axis of the radiated beam, what is the input to the bearing IF channel?

Description : If a target is on the bearing axis of the radiated beam, what is the input to the bearing IF channel?

Last Answer : Zero.

Tracks on each channel of a magnetic drum are grouped into what?

Description : Tracks on each channel of a magnetic drum are grouped into what?

Last Answer : Sectors.

What is a baseband communication channel like?

Description : What is a baseband communication channel like?

Last Answer : A party line

When aligning the trace with a short applied to channel A, which control should be adjusted to bring the trace parallel to the vertical axis?

Description : When aligning the trace with a short applied to channel A, which control should be adjusted to bring the trace parallel to the vertical axis?

Last Answer : TRACE ROTATE control.

A sound wave that is reflected back toward the source is known as what type of sound?

Description : A sound wave that is reflected back toward the source is known as what type of sound?

Last Answer : Echo.

Which type of optical source tends to operate at higher drive currents to produce light?

Description : Which type of optical source tends to operate at higher drive currents to produce light?

Last Answer : Laser.