Draw the transfer characteristics for N-channel JFET.

Draw the transfer characteristics for N-channel JFET.
by

1 Answer

Answer :

Transfer characteristics for N-channel JFET: 

image

by

Related questions

Sketch p-channel JFET construction.

Description : Sketch p-channel JFET construction.

Last Answer : p- channel JFET constructional diagram:

Draw the drain characteristics of p-channel FET and explain.

Description : Draw the drain characteristics of p-channel FET and explain.

Last Answer : Drain characteristics:- As VDS is increased from zero as shown , ID will increased proportionally through the p channel. In this region the channel resistance is constants because the depletion region is ... the depletion layer. (i.e. channel width zero) is called cutoff voltage or VGS(off).

Draw symbol for n-channel and p-channel MOSFET.

Description : Draw symbol for n-channel and p-channel MOSFET.

Last Answer : Symbol n-channel and p-channel MOSFET :   OR  

State 2 advantages of JFET over BJT.

Description : State 2 advantages of JFET over BJT.

Last Answer : Advantages of JFET over BJT: 1) High input impedance 2) Better thermal stability 3) Produce less noise 4) Smaller than BJT 5) Rugged in construction and simpler to fabricate 6) High degree of isolation between Input and Output. 

Draw the construction of p-channel D-MOSFET and state its working principle.

Description : Draw the construction of p-channel D-MOSFET and state its working principle. 

Last Answer : Construction of p-channel D-MOSFET: Working principle: The gate to source voltage is set to zero volts by the direct connection from one terminal to the other & voltage VDS is applied ... The value of voltage of VGS at which drain current nearly becomes zero is called cut off voltage. 

Draw the characteristics of UJT and state its working principle.

Description : Draw the characteristics of UJT and state its working principle.

Last Answer : The characteristics of Unijunction Transistor (UJT) can be explained by three parameters: * Cutoff Region * Negative Resistance Region * Saturation Region Cutoff Region : The ... in its ON position. The emitter voltage VE remains almost constant with the increasing emitter current.

Draw the input and output characteristics of CE configuration.

Description : Draw the input and output characteristics of CE configuration.

Last Answer : Input characteristics of CE configuration: Output characteristics of CE configuration:

What is the normal current path in an N-channel JFET?

Description : What is the normal current path in an N-channel JFET?

Last Answer : From source to drain.

The source and drain of an N-channel JFET are made of what type of material?

Description : The source and drain of an N-channel JFET are made of what type of material?

Last Answer : N-type material.

Sketch construction of N-channel JFET and explain its operating principle.

Description : Sketch construction of N-channel JFET and explain its operating principle.

Last Answer : Construction of N-channel JFET: Working of N channel FET: a)when VGS is zero,ID flows because of VDS b)Now when VGS increases towards negative, depletion layer also increases on both sides. c)so VGS control drain current ID d)so it is called as field effect Transistor

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Describe operation of N-channel JFET

Description : Describe operation of N-channel JFET

Last Answer : Operation of N-channel JFET  1) When VGS = 0 volt: When a voltage is applied between the drain and source with a DC supply voltage VDD with VGS = 0 V, the electrons flow from source ... to zero. The gate to source voltage at which current reduces to zero is called as pinch-off voltage.

Explain N-channel J-FET with its transfer characteristics.

Description : Explain N-channel J-FET with its transfer characteristics.

Last Answer : Working of Channel JFET: Working: 1. The application of negative gate voltage and positive drain voltage with respect to source, reverse biases the gate- source junction of an N-channel JFET. 2. When a ... symbol VP or VGS(OFF) . The value of VP is negative for N-channel JFET. 

The transit time of the current carriers through the channel of a JFET decides it's ?

Description : The transit time of the current carriers through the channel of a JFET decides it's?

Last Answer : The transit time of the current carriers through the channel of a JFET decides it's gate characteristics.

Draw the labeled circuit of RC phase shift oscillator. State the formula for frequency of oscillator.

Description : Draw the labeled circuit of RC phase shift oscillator. State the formula for frequency of oscillator.

Last Answer : Frequency of oscillation is given by,

Draw the circuit of single tuned amplifier and state its operating principle.

Description : Draw the circuit of single tuned amplifier and state its operating principle.

Last Answer : Operating Principle: The working of tuned voltage amplifier may be understood by considering a radio frequency signal, to be amplified applied at the input of the amplifier. The resonant frequency ... will be amplified. And all the other frequencies will be rejected by the tuned circuit. 

State the basic principle of piezoelectric crystal and draw the circuit diagram of crystal oscillator.

Description : State the basic principle of piezoelectric crystal and draw the circuit diagram of crystal oscillator.

Last Answer : Basic Principle: The main principle of a piezoelectric crystal is that a mechanical force, when applied on the crystal, it vibrates and produces electric charges on the crystal surface. When ac voltage is applied across crystal, it vibrates at the frequency of the applied voltage. (OR)

Draw the single stage class A power amplifier circuit diagram and draw the input and output waveforms.

Description : Draw the single stage class A power amplifier circuit diagram and draw the input and output waveforms.

Last Answer : Circuit diagram:- Input / Output waveforms:-

Draw the circuit diagram of Bootstrap’s time base generator and explain its working.

Description : Draw the circuit diagram of Bootstrap’s time base generator and explain its working.

Last Answer : Circuit Diagram Waveform: Here transistor Q1 acts as a switch and transistor Q2 acts as an emitter follower (i.e. a unit gain amplifier).  Circuit Operation: Initially transistor ... The circuit pulls itself up by its own bootstrap and hence it is known as bootstrap sweep circuit. 

Draw the circuit diagram of complementary symmetry Class B push-pull amplifier and describe its working.

Description : Draw the circuit diagram of complementary symmetry Class B push-pull amplifier and describe its working.

Last Answer : Diagram of complementary symmetry Class B push-pull amplifier: Working: The above circuit employs a NPN transistor and a PNP transistor connected in push pull configuration. When the input ... of class B, this circuit is termed as Complementary symmetry push pull class B amplifier.

Draw the multistage amplifier circuit diagram using RC coupling. State its advantages.

Description : Draw the multistage amplifier circuit diagram using RC coupling. State its advantages.

Last Answer : Advantages: 1. It has a wide frequency response. 2. For coupling the resistor and the capacitor are used and which are not expensive so the cost is low. 3. The circuit is very ... a wide frequency band. 5. It is high fidelity amplifier. 6. It provides less frequency distortion.

Draw the frequency response of DC amplifier. Comment on it.

Description : Draw the frequency response of DC amplifier. Comment on it.

Last Answer : frequency response: Comment : The gain remains constant at its midband value AM down to zero frequency (DC). Directcoupled amplifiers do not suffer gain reduction at low frequencies as compared ... , gain falls off at the high frequency end due to the internal capacitances of the transistor.

Draw the circuit and explain the operation of UJT relaxation oscillator.

Description : Draw the circuit and explain the operation of UJT relaxation oscillator. 

Last Answer : Working: When the supply voltage (VCC) is switched ON, the capacitor charges through resistor (R), till the capacitor voltage reaches the voltage level (VP) which is called as peak point voltage. At ... resistor R is shown as a variable resistor. The sweep period is given by the relation

Draw and explain V-I characteristics of a P-N junction diode.

Description : Draw and explain V-I characteristics of a P-N junction diode.

Last Answer : V-I Characteristics of a P-N junction: V-I characteristics of a Diode: The V-I characteristics can be divided in two parts. 1. Forward characteristics. 2. Reverse ... plot a graph with reverse voltage on horizontal axis and current on vertical axis, we obtain reverse characteristics.

Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Description : Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Last Answer : Static Resistance: The resistance offered by a p-n junction diode when it is connected to a DC circuit is called static resistance.  (OR) It is the ratio of DC voltage applied across diode ... The dynamic resistance of a diode is the ratio of change in voltage to the change in current. 

The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Description : The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Last Answer : Answer: D

Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Description : Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Last Answer : C. MESFET

The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Description : The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Last Answer : D. MESFET

Why JFET is called a unipolar transistor?

Description : Why JFET is called a unipolar transistor?

Last Answer : In JFET, the current conduction is either by electrons or holes and controlled by means of an electric field between the gate electrode and the conducting channel of the device, So it is called as a unipolar transistor.

What is the importance of JFET?

Description : What is the importance of JFET?

Last Answer : A JFET acts like a voltage controlled device i.e. input voltage controls the output current. This is different from ordinary transistor where input current controls the output current. JFET has higher input impedance than that of a conventional transistor.

What is pinch off voltage in JFET?

Description : What is pinch off voltage in JFET?

Last Answer : Pinch off voltage (VP): It is the minimum drain source voltage at which the drain current essentially becomes constant.

What is JFET?

Description : What is JFET?

Last Answer : A junction FET is a three terminal semiconductor device in which current conduction is by one type of carrier (i.e.) electrons or holes.

When compared to the JFET, what is the input impedance of the MOSFET?

Description : When compared to the JFET, what is the input impedance of the MOSFET?

Last Answer : The MOSFET has a higher input impedance.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

What are the two types of JFET?

Description : What are the two types of JFET?

Last Answer : N-channel and P-channel.

State advantages of MOSFET over JFET.

Description : State advantages of MOSFET over JFET.

Last Answer : ➨It can be operated in either enhancement mode or depletion mode. ➨MOSFET have much higher input impedance compare to JFET. ➨They have high drain resistance due to lower resistance of channel. ➨It is easy to manufacture. ➨They support high speed of operation compare to JFETs.

Compare JFET with MOSFET.

Description : Compare JFET with MOSFET.

Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Define junction field effect transistor (JFET) and give an example.

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

The transconductance of a JFET is computed at constant VDS by:

Description : The transconductance of a JFET is computed at constant VDS by: (1) Ratio of change in Idto change of Vgs (2) Ratio of change inVgs to change ofId (3) Product of change in Vgs to change of Id (4) Ratio of change in Vds to change of Id

Last Answer : The transconductance of a JFET is computed at constant VDS by: Ratio of change in Id to change of Vgs 

A depletion MOSFET differs from a JFET in the sense that it has no

Description : A depletion MOSFET differs from a JFET in the sense that it has no   (A) channel (B) gate (C) P-N junctions (D) substrate

Last Answer : A depletion MOSFET differs from a JFET in the sense that it has no P-N junctions 

A JFET has the disadvantage of

Description : A JFET has the disadvantage of  1. Having low input impedance 2. Having high output impedance 3. Having small gain band-width product 4. Possessing positive temperature coefficient

Last Answer : A JFET has the disadvantage of Having small gain band-width product

The operation of a JFET involves

Description : The operation of a JFET involves  (A) A flow of minority carriers (B) a flow 0f majority carriers (C) recombination (D) negative resistance

Last Answer : The operation of a JFET involves a flow 0f majority carriers 

The voltage gain of a common -source JFET amplifier depends up on its

Description : The voltage gain of a common -source JFET amplifier depends up on its  (1) Input impedance (2) Amplification factor (3) Dynamic drain resistance (4) Drain load resistance

Last Answer : B

While biasing JFET if drain and source are interchanged, then

Description : While biasing JFET if drain and source are interchanged, then (A) device will work normally (B) device will get damaged (C) device will work but value of drain current will affected (D) device will not operate at all

Last Answer : B

JFET in properly biased condition acts as a: ...

Description : JFET in properly biased condition acts as a:  (1) Current controlled current source (2) Voltage controlled voltage source (3) Voltage controlled current source (4) Impedance controlled current source

Last Answer : JFET in properly biased condition acts as a: Voltage controlled current source.

In a JFET drain current is maximum when VGS is...

Description : In a JFET drain current is maximum when VGS is  (a) zero (b) negative (c) positive (d) equal to Vp

Last Answer : A

Explain the operating principle of PNP transistor.

Description : Explain the operating principle of PNP transistor. 

Last Answer : The circuit connection of PNP transistor with supply voltages is as shown above. The emitter-base junction is connected as forward bias. Due to this the emitter pushes the holes from the P ... by the collector. This develops the collector current IC. This is how a PNP transistor operates. 

Define intrinsic standoff ratio.

Description : Define intrinsic standoff ratio.

Last Answer : It is defined as the ratio of the RB1 (base resistance 1) to the inter-base resistance RBB. 

List the types of power amplifier.

Description : List the types of power amplifier.

Last Answer : Types of Power amplifier: 1) Class A power amplifier 2) Class B power amplifier 3) Class AB power amplifier 4) Class C power amplifier

Sketch the single tuned amplifier.

Description : Sketch the single tuned amplifier.

Last Answer : single tuned amplifier