Why are solvents used in the soldering process?

Why are solvents used in the soldering process?
by

1 Answer

Answer :

To remove contaminants from soldered connections.
by

Related questions

What purpose does flux serve in the soldering process?

Description : What purpose does flux serve in the soldering process?

Last Answer : It cleans the metal by removing the oxide layer and prevents further oxidation during the soldering

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

Why is steel wool NEVER used as an abrasive to clean soldering tools?

Description : Why is steel wool NEVER used as an abrasive to clean soldering tools?

Last Answer : The strands can fall into electrical equipment being worked on and cause short circuits.

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

A soldering gun should NOT be used on what components?

Description : A soldering gun should NOT be used on what components?

Last Answer : Electronic components, such as resistors, capacitors, and transistors.

What type of flux must be used in all electrical and electronic soldering?

Description : What type of flux must be used in all electrical and electronic soldering?

Last Answer : Noncorrosive, nonconductive rosin fluxes.

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Description : What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Last Answer : It will overheat and could burn the insulation of the wire being soldered.

What should be done to a soldering iron tip that is pitted?

Description : What should be done to a soldering iron tip that is pitted?

Last Answer : File the tip until it is smooth and retin it.

State why a well-designed soldering iron is self-regulating

Description : State why a well-designed soldering iron is self-regulating

Last Answer : The resistance of its heating element increases with rising temperature, thus limiting the current flow.

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What does "tinning" mean in relationship to soldering?

Description : What does "tinning" mean in relationship to soldering?

Last Answer : The coating of the material to be soldered with a light coat of solder.

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Description : What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Last Answer : Adequate ventilation.

Flux aids in soldering by removing what from surfaces to be soldered?

Description : Flux aids in soldering by removing what from surfaces to be soldered?

Last Answer : Oxides.

In soldering, what alloy changes directly from a solid state to a liquid state?

Description : In soldering, what alloy changes directly from a solid state to a liquid state?

Last Answer : Eutectic.

How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Description : How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Last Answer : Use a skipping pattern

What determines the shape and size of a soldering iron tip?

Description : What determines the shape and size of a soldering iron tip?

Last Answer : The type of work to be done.

What is the most common source of heat in electronic soldering?

Description : What is the most common source of heat in electronic soldering?

Last Answer : Conductive-type soldering iron.

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Define soldering process and enlist any two applications.

Description : Define soldering process and enlist any two applications.

Last Answer : Soldering: Soldering is a method of joining two or more piece of metal by means of a fusible alloy or metal, called solder, applied in the molten state. Applications: 1. Circuitry ... gutters, 9. Refrigeration and plumbing machine tools components, 10. Copper foil in stained glass work.

How do I keep my grandson from dying from huffing solvents?

Description : How do I keep my grandson from dying from huffing solvents?

Last Answer : Oh sweetie all I can say is I’m so sorry you are going through this sorrow. We ached for our children and then we ache for our grandchildren. Do you think he would go to any twelve-step program?

Can you help me engineer this leak detection system for organic solvents?

Description : Can you help me engineer this leak detection system for organic solvents?

Last Answer : answer:I'm sorry that I may not be qualified to answer this question, but these are my ideas. If argon is what will be leaking, you could have some sort of argon detector, and some sort of ... when there are no leaks. Any drop in pressure would signal a leak. Look up pressure decay leak detection.

Which of the following are aprotic solvents?

Description : Which of the following are aprotic solvents?

Last Answer : Which of the following are aprotic solvents? A. `DMSO` B. `DMF` C. `H_(2)O` D. `CH_(3)COOH`

Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Description : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Last Answer : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar ... Statement-1 is false, Statement-2 is true

Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Description : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Last Answer : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ... is false D. A is false but R is true

Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Description : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Last Answer : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition ... is false D. A is false but R is true

What solutes dissolved in solvents create?

Description : What solutes dissolved in solvents create?

Last Answer : solutions

What types of substances will dissolve in polar solvents?

Description : What types of substances will dissolve in polar solvents?

Last Answer : As a rule polar solutes are dissolved in polar solvents.

Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Last Answer : Answer : D

The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Description : The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Last Answer : Ans:(c)

Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Description : Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Last Answer : Ans:(d)

Black lung disease occurs in people working in – (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Description : Black lung disease occurs in people working in – (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Last Answer : (4) Coal mines Explanation: Coal worker's pneumoconiosis, colloquially referred to as black lung disease, is a lung disease that results from breathing in dust from coal, graphite, or man-made carbon ... to be removed by the body; that leads to inflammation, fibrosis, and in worse cases, necrosis.

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Vulcanisation of rubber decreases its (A) Tensile strength (B) Resistance to organic solvents (C) Tackiness (D) Working temperature range

Description : Vulcanisation of rubber decreases its (A) Tensile strength (B) Resistance to organic solvents (C) Tackiness (D) Working temperature range

Last Answer : (C) Tackiness

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Description : Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Last Answer : (B) Chloroprene

Tin vessels are corroded by(A) Anhydrous ammonia(B) Aromatic solvents(C) Synthetic detergent solution(D) None of these

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Description : Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Last Answer : (D) Solvents

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Which of the following are capable of denaturing proteins? (a) organic solvents (b) extreme pH (c) heat (d) all of the these

Description : Which of the following are capable of denaturing proteins? (a) organic solvents (b) extreme pH (c) heat (d) all of the these

Last Answer : all of the these

Which of the following improperly describes the physical properties of an alkyne? (a) relatively nonpolar (b) nearly insoluble in water (c) less dense than water (d) insoluble in most organic solvents

Description : Which of the following improperly describes the physical properties of an alkyne? (a) relatively nonpolar (b) nearly insoluble in water (c) less dense than water (d) insoluble in most organic solvents

Last Answer : insoluble in most organic solvents

Which of the following are correct statements concerning unsaturated hydrocarbons? (a) All unsaturated hydrocarbons are insoluble in water. (b) All unsaturated hydrocarbons are soluble in nonpolar solvents. (c) All unsaturated hydrocarbons are more dense than water. (d) (a) & (c)

Description : Which of the following are correct statements concerning unsaturated hydrocarbons? (a) All unsaturated hydrocarbons are insoluble in water. (b) All unsaturated hydrocarbons are soluble in nonpolar solvents. (c) All unsaturated hydrocarbons are more dense than water. (d) (a) & (c)

Last Answer : (a) & (c)

Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point(b) solubility in common solvents(c) Rotation of plane-polarized light(d) Infrared spectrum

Description : Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point (b) solubility in common solvents (c) Rotation of plane-polarized light (d) Infrared spectrum

Last Answer : Rotation of plane-polarized light

__________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Description : __________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Last Answer : (B) Plasticisers