What should be done to a soldering iron tip that is pitted?

What should be done to a soldering iron tip that is pitted?
by

1 Answer

Answer :

File the tip until it is smooth and retin it.
by

Related questions

What determines the shape and size of a soldering iron tip?

Description : What determines the shape and size of a soldering iron tip?

Last Answer : The type of work to be done.

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

State why a well-designed soldering iron is self-regulating

Description : State why a well-designed soldering iron is self-regulating

Last Answer : The resistance of its heating element increases with rising temperature, thus limiting the current flow.

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

Why is steel wool NEVER used as an abrasive to clean soldering tools?

Description : Why is steel wool NEVER used as an abrasive to clean soldering tools?

Last Answer : The strands can fall into electrical equipment being worked on and cause short circuits.

A soldering gun should NOT be used on what components?

Description : A soldering gun should NOT be used on what components?

Last Answer : Electronic components, such as resistors, capacitors, and transistors.

Why are solvents used in the soldering process?

Description : Why are solvents used in the soldering process?

Last Answer : To remove contaminants from soldered connections.

What type of flux must be used in all electrical and electronic soldering?

Description : What type of flux must be used in all electrical and electronic soldering?

Last Answer : Noncorrosive, nonconductive rosin fluxes.

What purpose does flux serve in the soldering process?

Description : What purpose does flux serve in the soldering process?

Last Answer : It cleans the metal by removing the oxide layer and prevents further oxidation during the soldering

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Description : What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Last Answer : It will overheat and could burn the insulation of the wire being soldered.

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What does "tinning" mean in relationship to soldering?

Description : What does "tinning" mean in relationship to soldering?

Last Answer : The coating of the material to be soldered with a light coat of solder.

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Description : What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Last Answer : Adequate ventilation.

Flux aids in soldering by removing what from surfaces to be soldered?

Description : Flux aids in soldering by removing what from surfaces to be soldered?

Last Answer : Oxides.

In soldering, what alloy changes directly from a solid state to a liquid state?

Description : In soldering, what alloy changes directly from a solid state to a liquid state?

Last Answer : Eutectic.

How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Description : How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Last Answer : Use a skipping pattern

What is the most common source of heat in electronic soldering?

Description : What is the most common source of heat in electronic soldering?

Last Answer : Conductive-type soldering iron.

Pitted Morello Cherries in syrup, what can I make with them?

Description : Pitted Morello Cherries in syrup, what can I make with them?

Last Answer : Cherry bread pudding.

What is the proper procedure for watering orchard of various pitted fruit trees around 4 years old?

Description : What is the proper procedure for watering orchard of various pitted fruit trees around 4 years old?

Last Answer : Need Answer

Motor controller or starter contacts may become pitted and welded together if the contacts _____________. A. open under loaded conditions B. close slowly with light pressure C. open too quickly and arc D. close quickly with proportionate pressure

Description : Motor controller or starter contacts may become pitted and welded together if the contacts _____________. A. open under loaded conditions B. close slowly with light pressure C. open too quickly and arc D. close quickly with proportionate pressure

Last Answer : Answer: B

Can we file the pitted contacts of contactor?

Description : Can we file the pitted contacts of contactor?

Last Answer : No, use emery paper and etc.  

Name the disease where the carcass must be pitted with lime: B A. Tuberculosis B. Anthrax C. Malaria D. Tetanus

Description : Name the disease where the carcass must be pitted with lime: B A. Tuberculosis B. Anthrax C. Malaria D. Tetanus

Last Answer : Anthrax

Name the disease where the carcass must be pitted with lime: B A. Tuberculosis B. Anthrax C. Malaria D. Tetanus

Description : Name the disease where the carcass must be pitted with lime: B A. Tuberculosis B. Anthrax C. Malaria D. Tetanus

Last Answer : Anthrax

Why do you think it is best for a soldering iron to have a soldering stand?

Description : Why do you think it is best for a soldering iron to have a soldering stand?

Last Answer : Have you ever had a soldering iron roll off the table and landon your wrist, burning a hole that took over a month to heal? I didin 5th grade while building one of the Radio Shack electronics kitsI had ... stand!!! I was nevergoing to run the risk of a soldering iron getting away from meagain!!!!!

Why do you think it is best for a soldering iron to have a soldering stand?

Description : Why do you think it is best for a soldering iron to have a soldering stand?

Last Answer : Have you ever had a soldering iron roll off the table and landon your wrist, burning a hole that took over a month to heal? I didin 5th grade while building one of the Radio Shack electronics kitsI had ... stand!!! I was nevergoing to run the risk of a soldering iron getting away from meagain!!!!!

Where can I go to get some information on soldering iron?

Description : Where can I go to get some information on soldering iron?

Last Answer : When you use a soldering iron you would be soldering some kind of metal frame or something because soldering irons are irrelevant to soldering iron. Sorry, not applicable.

What is soldering iron and how do you use it?

Description : What is soldering iron and how do you use it?

Last Answer : Soldering iron is used in heating the metal for soldering. If you want to learn more about soldering iron visit en.wikipedia.org/wiki/Soldering_iron.

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

Why is soldering done ?

Description : Why is soldering done ?

Last Answer : Soldering is done to increase the strength and durability of electrical wiring joints and to ensure uninterrupted wiring and protection from corrosive processes due to unforeseen nature.

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

If no suitable tip is available for a particular job, how may one be improvised?

Description : If no suitable tip is available for a particular job, how may one be improvised?

Last Answer : Wrap a length of copper wire around one of the regular tips and bend to the proper shape for the purpose.

A path encircles this hill which is made of iron or steel. You walk from the head to the bottom of its tip with your hands instead of your feet. You might need to hold something to strengthen your grip In order to hold two objects together no matter what the weather. What is this hill? -Riddles

Description : A path encircles this hill which is made of iron or steel. You walk from the head to the bottom of its tip with your hands instead of your feet. You might need to hold something to strengthen your grip In order to hold two objects together no matter what the weather. What is this hill? -Riddles

Last Answer : Screw/Bolt.

Does building a guitar involve any soldering?

Description : Does building a guitar involve any soldering?

Last Answer : Depends on the guitar. Acoustic, no. Electric, yes.

Anyone with soldering experience: Can you help me fix my thumb drive?

Description : Anyone with soldering experience: Can you help me fix my thumb drive?

Last Answer : Sounds like the wires are soldered onto the wrong pins and if ya don’t think any wires or leads are touching you better check it all over so that you do know that they are none touching…

What is soldering ?

Description : What is soldering ?

Last Answer : : After mechanical connection between the wire and the cable conductor, the joint is strengthened by solder and resin to strengthen the joint, increase the durability of the joint and the current barrier is called alloy or soldering.

What is soldering ?

Description : What is soldering ?

Last Answer : Soldering is the process by which two or more metals are joined together.

What is the ratio of soldering tin lead ?

Description : What is the ratio of soldering tin lead ?

Last Answer : The ratio of lead to tin is 40 ঃ 60.

What is soldering ?

Description : What is soldering ?

Last Answer : : Soldering is a special process by which two or more metallic components are joined together to form a connection and a filler metal element is used as an auxiliary for this purpose which is formed by flow at the junction in molten state.

looking for: soldering irons Prague

Description : Hello, I'm looking for someone who can solder, I need to solder up to 3.5 mm Jack cable, thank you

Last Answer : Almost anyone can do it, if possible. or anyone doing something in electronics

What is the type of solder that would be used in hard soldering?

Description : What is the type of solder that would be used in hard soldering?

Last Answer : Need answer

Acid soldering flux poisoning?

Description : Acid soldering flux poisoning?

Last Answer : DefinitionAcid soldering flux is a chemical used to clean and protect the area (joint) where two pieces of metal come together. Flux poisoning occurs when someone swallows this substance.This is for information only ... Network.Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

Soldering Station?

Description : Soldering Station?

Last Answer : The key to getting a good soldering station is first knowing what purpose you are going to be using it for. After that, make sure the one you choose is sturdy enough, and has enough room for what you are doing. Avoid cheaply made stations as they are prone to defects.

Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Description : Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Last Answer : (3) Cohesion Explanation: Soldering is the process of joining two metals by the use of a solder alloy, and it is one of the oldest known joining techniques. It is possible because of the ... through-out the interior of substance. Soldering leads to alloy formation at the layer between two metals.

Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Description : Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Last Answer : Answer: B

When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an oven to an even temperature and recheck with an ohmmeter B. reheat the connection with a match and recheck with an ohmmeter C. reheat connection with a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Description : When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an ... a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Last Answer : Answer: C