What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

What safety precaution must you observe when soldering  or hot-wire stripping fluoroplastic insulated wire?
by

1 Answer

Answer :

Adequate ventilation.
by

Related questions

What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Description : What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Last Answer : Avoid breathing the vapors when the insulation is heated.

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

What is the preferred method for stripping wire?

Description : What is the preferred method for stripping wire?

Last Answer : By use of a wire-stripping tool

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

What is the common name for enamel-insulated wire?

Description : What is the common name for enamel-insulated wire?

Last Answer : Magnet wire.

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

What type of flux must be used in all electrical and electronic soldering?

Description : What type of flux must be used in all electrical and electronic soldering?

Last Answer : Noncorrosive, nonconductive rosin fluxes.

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

Idea discussion - How useful are super freezers as an additional powerless safety precaution?

Description : Idea discussion - How useful are super freezers as an additional powerless safety precaution?

Last Answer : I think it’a a great idea @mattbrowne! It would be costly, but doable in terms of the cost of reactors now.

What are the safety precaution in dancing?

Description : What are the safety precaution in dancing?

Last Answer : Today, EDM is the fastest growing youth culture, and the community DanceSafe serves stretches far and wide. Current programs and initiatives aim to provide safe spaces to engage in conversations about ... Your Hearing9. If You're Sexually Active, Come Prepared with Protection10. Know Your Rights!

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What precaution should you take when you use 115 volts to zero a differential?

Description : What precaution should you take when you use 115 volts to zero a differential?

Last Answer : Never leave the circuit energized for more than 2 minutes.

What stripping tool would NOT be used to strip glass braid insulation?

Description : What stripping tool would NOT be used to strip glass braid insulation?

Last Answer : Hot-blade stripper.

A 'dead front' switchboard is one _____________. A. without switches on it B. with insulated switches and no exposed terminals C. without circuit breakers D. without safety hand rails nor rubber mats

Description : A 'dead front' switchboard is one _____________. A. without switches on it B. with insulated switches and no exposed terminals C. without circuit breakers D. without safety hand rails nor rubber mats

Last Answer : Answer: B

Why is steel wool NEVER used as an abrasive to clean soldering tools?

Description : Why is steel wool NEVER used as an abrasive to clean soldering tools?

Last Answer : The strands can fall into electrical equipment being worked on and cause short circuits.

A soldering gun should NOT be used on what components?

Description : A soldering gun should NOT be used on what components?

Last Answer : Electronic components, such as resistors, capacitors, and transistors.

Why are solvents used in the soldering process?

Description : Why are solvents used in the soldering process?

Last Answer : To remove contaminants from soldered connections.

What purpose does flux serve in the soldering process?

Description : What purpose does flux serve in the soldering process?

Last Answer : It cleans the metal by removing the oxide layer and prevents further oxidation during the soldering

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Description : What happens if a soldering gun switch is pressed for periods longer than 30 seconds?

Last Answer : It will overheat and could burn the insulation of the wire being soldered.

What should be done to a soldering iron tip that is pitted?

Description : What should be done to a soldering iron tip that is pitted?

Last Answer : File the tip until it is smooth and retin it.

State why a well-designed soldering iron is self-regulating

Description : State why a well-designed soldering iron is self-regulating

Last Answer : The resistance of its heating element increases with rising temperature, thus limiting the current flow.

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What does "tinning" mean in relationship to soldering?

Description : What does "tinning" mean in relationship to soldering?

Last Answer : The coating of the material to be soldered with a light coat of solder.

Flux aids in soldering by removing what from surfaces to be soldered?

Description : Flux aids in soldering by removing what from surfaces to be soldered?

Last Answer : Oxides.

In soldering, what alloy changes directly from a solid state to a liquid state?

Description : In soldering, what alloy changes directly from a solid state to a liquid state?

Last Answer : Eutectic.

How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Description : How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Last Answer : Use a skipping pattern

What determines the shape and size of a soldering iron tip?

Description : What determines the shape and size of a soldering iron tip?

Last Answer : The type of work to be done.

What is the most common source of heat in electronic soldering?

Description : What is the most common source of heat in electronic soldering?

Last Answer : Conductive-type soldering iron.

. In a MOSFET, which element is insulated from the channel material?

Description : . In a MOSFET, which element is insulated from the channel material?

Last Answer : The gate terminal.

Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Description : Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Description : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Last Answer : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each ... x C. y = x-1 D. y = -x+1

When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Description : When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Last Answer : Answer: B

Define insulated wire.

Description : Define insulated wire. 

Last Answer : Insulated wire: A conductor or multi-stranded conductor which has a insulating material on it is called a insulated wire. 

Define unprotected insulated wire.

Description : Define unprotected insulated wire. 

Last Answer : Unprotected insulated wire: Unprotected insulated wire is which the insulation of the wire is not covered by a protective sheathing to prevent it from mechanical damage. 

What safety precautions should I observe when handling electronics?

Description : What safety precautions should I observe when handling electronics?

Last Answer : Make sure it's unplugged, for one. I don't think that a fan would have much of a static charge to it, but if ever you're suspicious, try grounding it out with an insulated wire or something. ... ), but if you do, look up the Material Safety Data Sheet for it for guidelines on cleaning and disposal.

It is a very hot day. You are in a special kitchen, in that there are no exits and the walls of this kitchen are thermally very well insulated. If you open the refrigerator door, the room will eventually: w) cool off. x) remain the same. y) heat up.

Description : It is a very hot day. You are in a special kitchen, in that there are no exits and the walls of this kitchen are thermally very well insulated. If you open the refrigerator door, the room will eventually: w) cool off. x) remain the same. y) heat up.

Last Answer : ANSWER: Y -- HEAT UP.

Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Description : Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Last Answer : Flat.

To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Description : To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Last Answer : One-half wavelength.

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Description : Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Last Answer : A. Pre-soldering and heat treatment

To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws of the instrument around the insulated conductor C. connect the voltage test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Description : To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws ... test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Last Answer : Answer: B

The Code of Ethics contains both general ethical principles that are aspirational in character and also a: a. List of violations that would cause the automatic suspension of the CPA’s license. b. Description of the CPA’s procedures for responding to an inquiry from trial board. c. Set of specific, mandatory rules describing levels of conduct the CPA must observe. d. List of specific crimes that would be considered as acts discreditable to the profession.

Description : The Code of Ethics contains both general ethical principles that are aspirational in character and also a: a. List of violations that would cause the automatic suspension of the CPA's license. b ... observe. d. List of specific crimes that would be considered as acts discreditable to the profession.

Last Answer : Set of specific, mandatory rules describing levels of conduct the CPA must observe

What precaution do I need to know when changing an IMAP account to POP3 in Outlook 2007?

Description : What precaution do I need to know when changing an IMAP account to POP3 in Outlook 2007?

Last Answer : answer:I haven't used POP3 in years now. Why do you want to change? Do you want to remove the messages off the server? I don't think you can change an account from one type to ... . You should probably download the messages into a different set of of folders. That would prevent duplicate messages.

My apples having worm in the center how to take precaution of tree?

Description : My apples having worm in the center how to take precaution of tree?

Last Answer : Sun will definitely give you a stronger and better tree, but it sounds like you have been invaded by apple maggot.Territorial seed co. has a sphere in soft form that has a sticky attractant ... will give you a really good security in that it at tracks several critters away from your precious fruit

4. Collecting plant produce needs a lot of precaution. How? -History

Description : 4. Collecting plant produce needs a lot of precaution. How? -History

Last Answer : One needs to find out which plants or parts of plants are edible, that is, can be eaten, as many can be poisonous. It is also necessary to find out about the seasons when the fruits ripen.

3. What precaution should be taken to avoid the overloading of domestic electric circuits? -Physics-10

Description : 3. What precaution should be taken to avoid the overloading of domestic electric circuits? -Physics-10

Last Answer : A few of the precautions to be taken to avoid the overloading of domestic electric circuits are as follows: Connecting too many devices to a single socket should be avoided Using too many appliances at the same time should be avoided Faulty appliances should not be connected to the circuit

which of the following is a precaution a worker should take to avoid on-the-job fall hazards? -General Knowledge

Description : which of the following is a precaution a worker should take to avoid on-the-job fall hazards? -General Knowledge

Last Answer : Attend and participate in fall prevention training is a precaution a worker should take to avoid on-the-job fall hazards.