What types of substances will dissolve in polar solvents?

What types of substances will dissolve in polar solvents?
by

1 Answer

Answer :

As a rule polar solutes are dissolved in polar solvents.
by

Related questions

Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Description : Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Last Answer : Ans:(d)

Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Description : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Last Answer : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar ... Statement-1 is false, Statement-2 is true

Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Description : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ethyl group

Last Answer : Assertion(A): Ethyl alcohol is soluble in organic solvents Reason (R): Ethyl alcohol is having non polar ... is false D. A is false but R is true

Do polar compounds dissolve in water ?

Description : Do polar compounds dissolve in water ?

Last Answer : All polar compounds dissolve in water with few exceptions.

Do water molecules dissolve most polar solutes?

Description : Do water molecules dissolve most polar solutes?

Last Answer : Yes, this is a quasi-general rule.

Ionic substances dissolve in water to form: w) highly acid solutions x) electrolytic solutions y) colloids z) emulsions

Description : Ionic substances dissolve in water to form: w) highly acid solutions x) electrolytic solutions y) colloids z) emulsions

Last Answer : ANSWER: X -- ELECTROLYTIC SOLUTIONS

Dr. F. Went noted that if coleoptile tips were removed and placed on agar for one hour, the agar would produce a bending when pla(a) It made possible the isolation and exact identification of auxin. (b) It is the basis for quantitative determination of small amounts of growth-promoting substances. (c) It supports the hypothesis that IAA is auxin. (d) It demonstrated polar movement of auxinsced on one side of freshly-cut coleoptile stumps. Of what significance is this experiment?

Description : Dr. F. Went noted that if coleoptile tips were removed and placed on agar for one hour, the agar would produce a bending when placed on one side of freshly-cut coleoptile stumps. Of what ... . (c) It supports the hypothesis that IAA is auxin. (d) It demonstrated polar movement of auxins

Last Answer : (a) It made possible the isolation and exact identification of auxin.

What properties of water make it useful as a solvent? What types of compound can it dissolve and hydrolyse?

Description : What properties of water make it useful as a solvent? What types of compound can it dissolve and hydrolyse?

Last Answer : Ans-Water is a universal solvent because of its polar nature and ability to form hydrogen bonds a) It hydrolyses many ionic compounds and certain covalent compound by chemically reacting with them b) It form hydrogen bonds with some covalent compounds and dissolve them

How do I keep my grandson from dying from huffing solvents?

Description : How do I keep my grandson from dying from huffing solvents?

Last Answer : Oh sweetie all I can say is I’m so sorry you are going through this sorrow. We ached for our children and then we ache for our grandchildren. Do you think he would go to any twelve-step program?

Can you help me engineer this leak detection system for organic solvents?

Description : Can you help me engineer this leak detection system for organic solvents?

Last Answer : answer:I'm sorry that I may not be qualified to answer this question, but these are my ideas. If argon is what will be leaking, you could have some sort of argon detector, and some sort of ... when there are no leaks. Any drop in pressure would signal a leak. Look up pressure decay leak detection.

Which of the following are aprotic solvents?

Description : Which of the following are aprotic solvents?

Last Answer : Which of the following are aprotic solvents? A. `DMSO` B. `DMF` C. `H_(2)O` D. `CH_(3)COOH`

Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Description : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition compound with ethyl alcohol

Last Answer : Assertion (A): Ethyl alcohol is soluble in organic solvents Reason(R): Calcium chloride can form an addition ... is false D. A is false but R is true

What solutes dissolved in solvents create?

Description : What solutes dissolved in solvents create?

Last Answer : solutions

Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Last Answer : Answer : D

The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Description : The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Last Answer : Ans:(c)

Black lung disease occurs in people working in – (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Description : Black lung disease occurs in people working in – (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Last Answer : (4) Coal mines Explanation: Coal worker's pneumoconiosis, colloquially referred to as black lung disease, is a lung disease that results from breathing in dust from coal, graphite, or man-made carbon ... to be removed by the body; that leads to inflammation, fibrosis, and in worse cases, necrosis.

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Vulcanisation of rubber decreases its (A) Tensile strength (B) Resistance to organic solvents (C) Tackiness (D) Working temperature range

Description : Vulcanisation of rubber decreases its (A) Tensile strength (B) Resistance to organic solvents (C) Tackiness (D) Working temperature range

Last Answer : (C) Tackiness

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Description : Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Last Answer : (B) Chloroprene

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Tin vessels are corroded by(A) Anhydrous ammonia(B) Aromatic solvents(C) Synthetic detergent solution(D) None of these

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Description : Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Last Answer : (D) Solvents

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Which of the following are capable of denaturing proteins? (a) organic solvents (b) extreme pH (c) heat (d) all of the these

Description : Which of the following are capable of denaturing proteins? (a) organic solvents (b) extreme pH (c) heat (d) all of the these

Last Answer : all of the these

Which of the following improperly describes the physical properties of an alkyne? (a) relatively nonpolar (b) nearly insoluble in water (c) less dense than water (d) insoluble in most organic solvents

Description : Which of the following improperly describes the physical properties of an alkyne? (a) relatively nonpolar (b) nearly insoluble in water (c) less dense than water (d) insoluble in most organic solvents

Last Answer : insoluble in most organic solvents

Which of the following are correct statements concerning unsaturated hydrocarbons? (a) All unsaturated hydrocarbons are insoluble in water. (b) All unsaturated hydrocarbons are soluble in nonpolar solvents. (c) All unsaturated hydrocarbons are more dense than water. (d) (a) & (c)

Description : Which of the following are correct statements concerning unsaturated hydrocarbons? (a) All unsaturated hydrocarbons are insoluble in water. (b) All unsaturated hydrocarbons are soluble in nonpolar solvents. (c) All unsaturated hydrocarbons are more dense than water. (d) (a) & (c)

Last Answer : (a) & (c)

Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point(b) solubility in common solvents(c) Rotation of plane-polarized light(d) Infrared spectrum

Description : Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point (b) solubility in common solvents (c) Rotation of plane-polarized light (d) Infrared spectrum

Last Answer : Rotation of plane-polarized light

__________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Description : __________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Last Answer : (B) Plasticisers

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of its total amount". This is (A) The distribution law (B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Description : A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of ... B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Last Answer : (A) The distribution law

Why are solvents used in the soldering process?

Description : Why are solvents used in the soldering process?

Last Answer : To remove contaminants from soldered connections.

What are the three classes of organic solvents?

Description : What are the three classes of organic solvents?

Last Answer : Typically, organic solvents can be split up in the following classes: Oxygenated, Hydrocarbon, and Halogenated. Oxygenated solvents include alcohols, glycol ethers, ketones, esters, ... solvents include aliphatics and aromatics. Halogenated solvents include those that are chlorinated primarily.

What are the solvents used in compressor wash?

Description : What are the solvents used in compressor wash?

Last Answer : In eco wash, pure demineralized water is used.

Other than ai, by which of the following phytotoxicity may occur a).solvents b).impurities’ c).high dose d).all

Description : Other than ai, by which of the following phytotoxicity may occur a).solvents b).impurities’ c).high dose d).all

Last Answer : d).all

A nonpolar molecule is usually: w) hydrophilic x) soluble in water y) hydrophytic z) soluble in organic solvents

Description : A nonpolar molecule is usually: w) hydrophilic x) soluble in water y) hydrophytic z) soluble in organic solvents

Last Answer : ANSWER: Z -- SOLUBLE IN ORGANIC SOLVENTS

Black lung disease occurs in people working in (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Description : Black lung disease occurs in people working in (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Last Answer :  Coal mines

Will borax dissolve in oils?

Description : Will borax dissolve in oils?

Last Answer : No, I don’t think so, since it is a sodium (salt) compound.

To all chemists: What sort of compound would dissolve clothing, yet not at all react with skin and hair?

Description : To all chemists: What sort of compound would dissolve clothing, yet not at all react with skin and hair?

Last Answer : Lots of moths and larva can eat clothes and leave skin and hair alone. Biology not chemistry. I hope it helps. Have fun making a slime monster.

Is it safe to crush pills and dissolve them in water?

Description : Is it safe to crush pills and dissolve them in water?

Last Answer : It's ok for some meds and not for others. You can always ask the pharmacist or call the drug company. A basic rule is don't open up capsules, but even with capsules it's sometimes ok. Crushing an ... drink plenty of water. Having a little food wth it is good too, even if it's just a cracker.

Is there a way to dissolve spider webs on the centers of humming bird feeders?

Description : Is there a way to dissolve spider webs on the centers of humming bird feeders?

Last Answer : answer:Yep. I flash mine with my Bernzomastic TS4000 torch.nI use the standard green propane canister, not the yellow MAPP gas canister. A quick flash is all it takes. Poof! I also use it to clear out the spider webs that collect on my car. Note: This will also clear out the spider.

Do you think a relationship really has no recourse but to dissolve if either party refuses to join in a move?

Description : Do you think a relationship really has no recourse but to dissolve if either party refuses to join in a move?

Last Answer : answer:Most likely. I did the long distance thing a few times, and besides being expensive, it’s easy to get bored with the stress of it. That said, some people enjoy all kinds of odd arrangements.

How do you dissolve friendships that do nothing but irk you?

Description : How do you dissolve friendships that do nothing but irk you?

Last Answer : Abruptly.

What makes salt dissolve a snail?

Description : What makes salt dissolve a snail?

Last Answer : answer:I think this is right. Water goes to wherever there is proportionately less water. If you put a piece of onion skin in salt water and look at it under a microscope, you'll see the cells shrink ... much just a big mucous membrane, so the water behaves the same way as that in an onion skin.

Is it safe to break apart a calcium capsule to dissolve the powder in juice?

Description : Is it safe to break apart a calcium capsule to dissolve the powder in juice?

Last Answer : I have a chewable calcium supplement – pretty sure you can open yours.

One day a alchemist brought a king a bottle holding a strange liquid. The alchemist said, 'This liquid I discovered will dissolve anything it touches.' How did the king know that he was lying? -Riddles

Description : One day a alchemist brought a king a bottle holding a strange liquid. The alchemist said, 'This liquid I discovered will dissolve anything it touches.' How did the king know that he was lying? -Riddles

Last Answer : The king knew if what he said was true the bottle would get dissolved!