Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.
Last Answer : [ A ] 0.12% of gross cross sectional area
Description : The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%
Last Answer : [ A ] 0.12%
Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete
Last Answer : (a) 0.12% of the gross area of concrete
Description : Protein content of cereals ranges from (a) 8-12% (b) 12-15% (c) 15-20% (d) 20-25%
Last Answer : (a) 8-12%
Description : If plain bars are used, the area of distribution reinforcement in slabs should not less than (a) 0.12% of the gross area f concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete
Last Answer : (b) 0.15% of the gross area of concrete
Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%
Last Answer : (b) 10 to 15%
Description : The strength of concrete after one year as compared to 28 days strength is about (A) 10 to 15% more (B) 15 to 20% more (C) 20 to 25% more (D) 25 to 50% more
Last Answer : Answer: Option C
Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%
Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%
Last Answer : (a) 10 to 15%
Description : Protein content of rice is about (A) 7% (B) 12% (C) 15% (D) 20%
Last Answer : Answer : A
Description : A article is listed at Rs. 2000 and a discount of 20% is offered on the list price .What additional discount must be offered to the customer bring the net price to Rs. 1400? A. 12.5% B. 10% C. 12% D. 15%
Last Answer : Answer – A. 12.5% Explanation – S.P after 1st discount, 100%………2000 80%………? ?=2000×80/100=1600 Net S.P = Rs. 1400. Discount on Rs. 1600 = Rs. 200. ∴Required discount = (200/1600 x 100)% =12.5%
Description : Permanent magnets are made of high carbon steel and (A) 15% of cobalt (B) 20% of cobalt (C) 35% of cobalt (D) 45% of cobalt
Last Answer : Answer: Option D
Description : The Minimum amount of steel for Main reinforcement in slab should be (Fe 415- grade of steel) [ A ] 0.12 percent of gross cross sectional area [ B ] 0.15 percent of gross cross sectional area [ C ] 0.20 percent of gross cross sectional area [ D ] 0.25 percent of gross cross sectional area.
Last Answer : [ A ] 0.12 percent of gross cross sectional area
Description : How much forests area of countyr should have? A. 15% B. 20% C. 25% D. 30%
Last Answer : ANSWER: C
Description : _______ percentage of Payment Bank‟s branches must be in the unbanked rural area. A. 25% B. 10% C. 15% D. 20% E. None of the Above
Last Answer : A. 25% Explanation: 25% of Payment Bank‘s branches must be in the unbanked rural area.
Description : IFC is a non-banking finance company with Capital to Risk (Weighted) Assets Ratio (CRAR) of _____ A. 15% B. 20% C. 25% D. 30% E. None of the Above
Last Answer : A. 15% Explanation: IFC is a non-banking finance company with Capital to Risk (Weighted) Assets Ratio (CRAR) of 15%.
Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%
Last Answer : b. 15%
Description : The loss made by selling 16 m of a cloth equals the selling price of 4 m of that cloth. Find the loss percentage a)15% b)20% c)33 1/3% d)25%
Last Answer : b)20%
Description : What is the starting awareness percentage of a new product? a. 15% b. 65% c. 40% d. 25% e. 20%
Last Answer : d. 25%
Description : What happens to a product priced at $1 above or below the segment guideline when a segment’s product supply outstrips demand? a. It loses 25% of its appeal. b. It loses 10% of its appeal. c. It loses 20% of its appeal. d. It loses 15% of its appeal. e. None of the above.
Last Answer : c. It loses 20% of its appeal.
Description : For optimum working the slip should not exceed a) 15% b) 20% c) 25% d) 30%
Last Answer : a) 15%
Description : If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%
Last Answer : c) 20% *
Description : Ronit spends his money from his saving in different way that is he spends 25% on travel,15% on food,20% on wages and 17% on shopping a clothes and after that all expenditure he saved 6900.Find the how much he spent on clothes. A) 4400 B) 5100 C) 4000 D) 6000
Last Answer : B) Let the total income of Ronit x then total expenditure from income X x (25%+15%+20%+17%)=X*77% X x 77% =Total savings= X x 23% X = 6900 x 100 / 23 = 30000 expenditure on clothes = 17% so,30000 x 17 / 100 = 5100
Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75
Last Answer : (b) 15, 25, 40 and 75
Description : Food must be moist, with a minimum water content of _____before contamination by microorganisms and spoilage can occur. a. 18% to 20% b. 10 to 15% c. 5 to 10% d. 0 to 5%
Last Answer : a. 18% to 20%
Description : Minimum percentage of longitudinal steel in a column should not be less than [ A ] 0.60% [ B ] 0.80% [ C ] 1.00% [ D ] 1.20%
Last Answer : [ B ] 0.80%
Description : Pick up the correct statement from the following: (A) Domestic use of water is 50% of total consumption (B) Average consumption of commercial use of water is 25% of total consumption (C) Waste water and leakage is 15% of total consumption (D) All the above
Last Answer : (D) All the above
Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%
Description : By over-reinforcing a beam, the moment of resistance can be increased not more than [ A ] 10% [ B ] 15% [ C ] 25% [ D ] 50%
Last Answer : [ C ] 25%
Description : The minimum number of bags which a UBO will be authorised to keep will generally be equal to the number of bags required for despatch for the day plus: (A) 10% (B) 20% (C) 25% (D) 50%
Last Answer : (A) 10%
Description : As per SEBI Guideline minimum Application money shall not be less than A. 25% of Issue price B. 10% of Issue price C. 20% of Issue price D. 6% of Issue price
Last Answer : A. 25% of Issue price
Description : According to 2017 census what is the share of Khyber Pakhtunkhwa in the total Population of Pakistan A. 9% B. 12% C. 15% D. 19%
Description : Bank of India has sold how much percent of its stake in Star Union Dai-Ichi Life insurance to Dai-Ichi? A) 18% B) 26% C) 38% D) 15% E) 12%
Last Answer : A) 18% Explanation: The shareholding of Dai-Ichi in the Indian life insurance venture will now increase from 26% to 44% while Bank of India‘s shareholding will decrease from 30% to 48%. Union Bank will continue to hold 26%.
Description : The protein content in wheat is approximately--------? A. 6% B. 9% C. 12% (Answer) D. 15%
Last Answer : C. 12% (Answer)
Description : Strength of a welded joint increases by radio graphing by i. 10 % ii. 12% iii. 15% iv. None
Last Answer : ii. 12%
Description : What is the contribution of Animal Husbandry Sector in the agricultural growth ? (A) 10% (B) 12% – 15% (C) 7% – 9% (D) 5%
Last Answer : (C) 7% – 9%
Description : The marked price of a watch was Rs. 720.A man brought the same for Rs.550.80 after getting two successive discounts the first being 10% .What was the second discount rate? A. 12% B. 14% C. 15% D. 18%
Last Answer : Answer – C. 15% Explanation – Let the second discount rate be x% Then, (100 – x)% of 90% of 720 = 550.80 => (100 – x)/100 x 90/100 x 720 = 550.80 = (100-x) = [55080/(9 x 72) = 85 => x= 15 second discount rate =15%
Description : Ayurvedic products comes under which rate structure? (A) 14% (B) 15% (C) 12% (D) 11%
Last Answer : C) 12%
Description : The volume shrinkage of methyl metacrylate monomer when polymerized is:** A. 12% B. 15% C. 18% D. 21%
Last Answer : D. 21%
Description : When shear stress exceeds the permissible limit in a slab, then it is reduced by (A) Increasing the depth (B) Providing shear reinforcement (C) Using high strength steel (D) Using thinner bars but more in number
Last Answer : Answer: Option A
Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%
Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%
Last Answer : [ B ] 10%
Description : When estimating project time schedules using industry standards for a systems project, the following values are acceptable: 15% for planning, 25% for analysis, 50% for design, and 10% for implementation.
Last Answer : Ans: False
Description : The amount of reinforcement for main bars in a slab, is based upon (A) Minimum bending moment (B) Maximum bending moment (C) Maximum shear force (D) Minimum shear force
Last Answer : Answer: Option B
Description : The amount of reinforcement for main bars in a slab, is based upon (a) Maximum bending moment (b) Minimum bending moment (c) Maximum shear force (d) Minimum shear force
Last Answer : (a) Maximum bending moment
Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)
Last Answer : [ B ] Plastic deformations in the slab are negligible
Description : Negative yield line form i. Near the supports in the case of slabs fixed or continuous at the edge. ii. At mid span in the case of slabs fixed. iii.At mid span for simply supported circular slab [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii
Last Answer : [ A ] i