The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

The moment-distribution method in structural analysis falls in the category of
(a) Displacement method (b) Force method
(c) Flexibility method (d) First order approximate method
by

1 Answer

Answer :

(a) Displacement method
by

Related questions

Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Description : Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Last Answer : (A) Moment distribution method

Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Description : Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Last Answer : (B) Column analogy method

In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Description : In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Last Answer : (A) Displacements

Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Description : Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Last Answer : (B) Column analogy method

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

For structural analysis of forces, the method refers to (A) Moment-area-theorem (B) Three-moment equation (C) Maxwell's reciprocal theorem (D) None of these

Description : For structural analysis of forces, the method refers to  (A) Moment-area-theorem  (B) Three-moment equation  (C) Maxwell's reciprocal theorem  (D) None of these

Last Answer : (A) Moment-area-theorem 

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

In moment distribution method, the sum of distribution factors of all the members meeting at any joint is always (A) Zero (B) Less than 1 (C) 1 (D) Greater than 1

Description : In moment distribution method, the sum of distribution factors of all the members meeting at any joint is always (A) Zero (B) Less than 1 (C) 1 (D) Greater than 1

Last Answer : (C) 1

What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Description : What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Last Answer : Grillage analysis suffers from the following shortcomings based on E. C. Hambly: (i) For coarse mesh, torques may not be identical in orthogonal directions. Similarly, twists may differ in ... moment in an element depends on the curvatures in the beam's direction and its orthogonal direction.

For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Description : For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Last Answer : (B) Elastic structures

Which of the following is a characteristic of qualitative research? a. Design flexibility b. Inductive analysis c. Context sensitivity d. All of the above

Description : Which of the following is a characteristic of qualitative research? a. Design flexibility b. Inductive analysis c. Context sensitivity d. All of the above

Last Answer : d. All of the above

A primary advantage of the concentration targeting strategy is that: A)it requires less market research and information B)it requires less intensive analysis of customers needs C)it maintains the firm's flexibility in moving into other market segments D)it permits development of a special marketing mix for a single market segment

Description : A primary advantage of the concentration targeting strategy is that: A)it requires less market research and information B)it requires less intensive analysis of customers needs C)it maintains the ... market segments D)it permits development of a special marketing mix for a single market segment

Last Answer : D)it permits development of a special marketing mix for a single market segment

The important pre-requisites of a researcher in sciences, social sciences and humanities are (A) laboratory skills, records, supervisor, topic (B) Supervisor, topic, critical analysis, patience (C) archives, supervisor, topic, flexibility in thinking (D) topic, supervisor, good temperament, pre-conceived notions

Description : The important pre-requisites of a researcher in sciences, social sciences and humanities are (A) laboratory skills, records, supervisor, topic (B) Supervisor, topic, critical analysis, ... supervisor, topic, flexibility in thinking (D) topic, supervisor, good temperament, pre-conceived notions

Last Answer : (B) Supervisor, topic, critical analysis, patience

During the night when the F2 layer combines with F1 layer it falls to what approximate height? A. 250 km B. 350 km C. 300 km D. 400 km

Description : During the night when the F2 layer combines with F1 layer it falls to what approximate height? A. 250 km B. 350 km C. 300 km D. 400 km

Last Answer : C. 300 km

Structural and Non-structural measures are elements of high category of Risk Reduction measures a. Socio-economic measures b. Physical measures c. Environmental measures d. Post disaster measures

Description : Structural and Non-structural measures are elements of high category of Risk Reduction measures a. Socio-economic measures b. Physical measures c. Environmental measures d. Post disaster measures

Last Answer : b. Physical measures

Name one type of agriculture which falls in the category of commercial agriculture. Write the main characteristics of this type of agriculture. -Geography 10th

Description : Name one type of agriculture which falls in the category of commercial agriculture. Write the main characteristics of this type of agriculture. -Geography 10th

Last Answer : Plantation agriculture is a type of commercial farming. Characteristics of plantation agriculture:A single type of crop is grown on a large area.Plantation is carried out on large estates ... areas, processing industries and markets plays an important role in the development of plantations.

What specifically falls under the category of entertainment coupons?

Description : What specifically falls under the category of entertainment coupons?

Last Answer : Entertainment coupons do not necessarily fall neatly into one category, but they are often generally associated with deals at social outlets such as clubs and bars, especially ones that have a ... , go kart tracks, and other activity-based businesses would also be considered entertainment coupons.

UV light falls in the category of------? A. Ionizing Radiations (Answer) B. Non Ionizing Radiation C. Visible light D. None

Description : UV light falls in the category of------? A. Ionizing Radiations (Answer) B. Non Ionizing Radiation C. Visible light D. None

Last Answer : A. Ionizing Radiations (Answer)

If the mean stress value for a sinusoidal stress function is zero, then this type of stress falls in which category? a) Fluctuating Stresses b) Alternating Stresses c) Repeated Stresses d) Reversed Stresses

Description : If the mean stress value for a sinusoidal stress function is zero, then this type of stress falls in which category? a) Fluctuating Stresses b) Alternating Stresses c) Repeated Stresses d) Reversed Stresses

Last Answer : d) Reversed Stresses

Decision to stop testing should be based upon A. Successful use of specific test case design methodologies B. A percentage of coverage for each coverage category C. Rate of error detection falls below a specified threshold D. All of the above

Description : Decision to stop testing should be based upon A. Successful use of specific test case design methodologies B. A percentage of coverage for each coverage category C. Rate of error detection falls below a specified threshold D. All of the above

Last Answer : D. All of the above

Which one of the following falls into the category of offer? (a) Newspaper advertisement regarding sale. (b) Display of goods by a shopkeeper in his window with prices marked on them (c) An advertisement for a concert. (d) Announcement of reward to the public.

Description : Which one of the following falls into the category of offer? (a) Newspaper advertisement regarding sale. (b) Display of goods by a shopkeeper in his window with prices marked on them (c) An advertisement for a concert. (d) Announcement of reward to the public.

Last Answer : (d) Announcement of reward to the public.

Perceptron learning, Delta learning and LMS learning are learning methods which falls under the category of (A) Error correction learning – learning with a teacher (B) Reinforcement learning – learning with a critic (C) Hebbian learning (D) Competitive learning – learning without a teacher

Description : Perceptron learning, Delta learning and LMS learning are learning methods which falls under the category of (A) Error correction learning – learning with a teacher (B) Reinforcement learning – learning with a critic (C) Hebbian learning (D) Competitive learning – learning without a teacher

Last Answer : (A) Error correction learning – learning with a teacher

The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Description : The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Last Answer : (D) Algebraic sum of the transverse forces of the section

While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Description : While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Last Answer : [ B ] More accurate

The most widely used method for analysing the performance of a marketing strategy is A)cost analysis. B)sales analysis. C)distribution analysis. D)promotional analysis. E)target market analysis

Description : The most widely used method for analysing the performance of a marketing strategy isA)cost analysis. B)sales analysis. C)distribution analysis. D)promotional analysis. E)target market analysis

Last Answer : B)sales analysis.

In moment distribution method the effect of applies moment on adjacent joints are a. neglected b. carried over c. multiplied by a factor before applying d. distributed over the span

Description : In moment distribution method the effect of applies moment on adjacent joints are a. neglected b. carried over c. multiplied by a factor before applying d. distributed over the span

Last Answer : b. carried over

In moment distribution method any unbalanced moment at a joint is a. neglected b. multiplied by a factor to solve c. distributed in the spans d.considered infinite

Description : In moment distribution method any unbalanced moment at a joint is a. neglected b. multiplied by a factor to solve c. distributed in the spans d.considered infinite

Last Answer : c. distributed in the spans

In moment distribution method initially all the members of the beam as assumed to be a.free b.fixed c.partially free d.partially fixed

Description : In moment distribution method initially all the members of the beam as assumed to be a.free b.fixed c.partially free d.partially fixed

Last Answer : b.fixed

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is meant to provide an accepted and systematic method of describing the various types of soils eliminating personal factors (C) The first category of soil classification is based on grain size of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is ... first category of soil classification is based on grain size of the soil (D) All the above

Last Answer : Answer: Option D

In PERT analysis, the time estimates of activities and probability of their occurrence follow (A) Normal distribution curve (B) Poisson's distribution curve (C) Beta distribution curve (D) None of the above

Description : In PERT analysis, the time estimates of activities and probability of their occurrence follow (A) Normal distribution curve (B) Poisson's distribution curve (C) Beta distribution curve (D) None of the above

Last Answer : (C) Beta distribution curve

The probability distribution taken to represent the completion of time in PERT analysis is (a) Normal Distribution (b) Bet Distribution (c) Gamma Distribution (d) Gaussain Distribution

Description : The probability distribution taken to represent the completion of time in PERT analysis is (a) Normal Distribution (b) Bet Distribution (c) Gamma Distribution (d) Gaussain Distribution

Last Answer : (a) Normal Distribution

What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0.5

For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Last Answer : d.Temperature

Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of jet is uncharged. 4. Plate moves at a constant velocity. Which of these statements are relevant? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Description : Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of ... b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Last Answer : (a) 1, 2 & 4 only

A satisfactory statistical quantitative method should not possess one of the following qualities (A) Appropriateness (B) Measurability (C) Comparability (D) Flexibility

Description : A satisfactory statistical quantitative method should not possess one of the following qualities (A) Appropriateness (B) Measurability (C) Comparability (D) Flexibility

Last Answer : (D) Flexibility

As compared to rental and leasing methods to acquire computer systems for a Management Information System (MIS), purchase method has following advantage : (A) It has high level of flexibility (B) It doesn’t require cash up-front (C) It is a business investment (D) Little risk of obsolescence

Description : As compared to rental and leasing methods to acquire computer systems for a Management Information System (MIS), purchase method has following advantage : (A) It has high level of flexibility (B) It doesn’t require cash up-front (C) It is a business investment (D) Little risk of obsolescence

Last Answer : (C) It is a business investment

ABC analysis is an inventory control technique in which: (a) Inventory levels are maintained (b) Inventory is classified into A, B and C category with A being the highest quantity, lowest value. (c) Inventory is classified into A, B and C Category with A being the lowest quantity, highest value (d) Either b or c

Description : ABC analysis is an inventory control technique in which: (a) Inventory levels are maintained (b) Inventory is classified into A, B and C category with A being the highest quantity, lowest value. (c) ... A, B and C Category with A being the lowest quantity, highest value (d) Either b or c

Last Answer : (c) Inventory is classified into A, B and C Category with A being the lowest quantity, highest value

How to write a structural analysis of a script?

Description : How to write a structural analysis of a script?

Last Answer : You should have a good introduction, explaining the environment and the characters.

What types of models are created during software requirements analysis? (A) Functional and behavioral (B) Algorithmic and data structure (C) Architectural and structural (D) Usability and reliability

Description : What types of models are created during software requirements analysis? (A) Functional and behavioral (B) Algorithmic and data structure (C) Architectural and structural (D) Usability and reliability

Last Answer : (A) Functional and behavioral

Horizontal analysis is also known as ----------------------- a) Static analysis b) Structural analysis c) Dynamic analysis d) None of these

Description : Horizontal analysis is also known as ----------------------- a) Static analysis b) Structural analysis c) Dynamic analysis d) None of these

Last Answer : c) Dynamic analysis

Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Description : Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Last Answer : (A) 1-1000

The deformation of a spring produced by a unit load is called (A) Stiffness (B) Flexibility (C) Influence coefficient (D) Unit strain

Description : The deformation of a spring produced by a unit load is called (A) Stiffness (B) Flexibility (C) Influence coefficient (D) Unit strain

Last Answer : (B) Flexibility

Select the correct statement (A) Flexibility matrix is a square symmetrical matrix (B) Stiffness matrix is a square symmetrical matrix (C) Both (A) and (B) (D) None of the above

Description : Select the correct statement (A) Flexibility matrix is a square symmetrical matrix (B) Stiffness matrix is a square symmetrical matrix (C) Both (A) and (B) (D) None of the above

Last Answer : (C) Both (A) and (B

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of a flexibility matrix must be positive (iv) Of a flexibility matrix must be negative The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Description : For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of ... ) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Last Answer : (A) (i) and (iii)

The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Description : The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Last Answer : Answer: Option B

For a proportional outlet, the flexibility is (A) Zero (B) Between zero and 1 (C) 1 (D) Greater than 1

Description : For a proportional outlet, the flexibility is (A) Zero (B) Between zero and 1 (C) 1 (D) Greater than 1

Last Answer : Answer: Option C

Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the rate of change of the discharge of the parent channel c) Parent channel discharge to the rate of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Description : Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the ... of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Last Answer : b) Outlet discharge to the rate of change of the discharge of the parent channel