The capacitor connected in series with the line is used to

The capacitor connected in series with the line is used to 

A) enhance power factor B) enhance power system capability C) decrease the losses D) decrease the power transfer
by

1 Answer

Answer :

The capacitor connected in series with the line is used to enhance power system capability 

by

Related questions

What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is

Description : What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is approximately equal to the source voltage?

Last Answer : Capacitor always charges up to the voltage of source. When the capacitor is charged to same as source voltage then there is no current flowing through the capacitor. The current through the capacitor is called displacement current. 

If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be

Description : If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be (a) Square wave (b) Step function (c) Triangular wave (d) Zero

Last Answer : If a capacitor is charged by a square wave current source, the voltage across the capacitor is : triangular wave

To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current

Description :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will _____.

Last Answer :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will decrease.

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Description : In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Last Answer : Ans: B To make single phase motor self start. We split the phases at 90 degree. Hence, motor behaves like a two phase motor.

A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do one of the following things. Will it: w) flow in one direction, beginning at a maximum and decreasing rapidly to zero x) oscillate indefinitely y) oscillate but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency

Description : A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do ... but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency  

Last Answer : ANSWER: Y -- OSCILLATE BUT DIMINISH STEADILY TO ZERO

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Last Answer : ANSWER: 4/3 FARADS

An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor

Description : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is :  (A) 100/11 (B) 11/100 (C) 110 (D) 1000

Last Answer : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : 100/11

Capacitance grading of cable implies

Description : Capacitance grading of cable implies A) grading according to capacitance of cables per kilometer length B) cables using single dielectric in different concentrations C) use of dielectrics of ... D) capacitance required to be introduced at different length to counter the effect of inductance

Last Answer : Capacitance grading of cable implies use of dielectrics of different permeabilities

A coil with large distributed capacitance has _____.

Description :  A coil with large distributed capacitance has _____.

Last Answer :  A coil with large distributed capacitance has high resonant frequency

If the filter capacitance is increased, the ripple will

Description : If the filter capacitance is increased, the ripple will (a) remain same (b) increase (c) decrease (d) be zero

Last Answer : C

A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on capacitor would be

Description : A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on capacitor would be

Last Answer : A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on ... . Q B. Q + CE C. C E D. none

A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Last Answer : Answer: D

A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value B. deflect to zero and remain at that position C. swing to a high reading and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Description : A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value ... and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Last Answer : Answer: B

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value for the capacitor B. first swing quickly to 'zero', then gradually move up the scale as the capacitor charges C. immediately deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Description : A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance ... deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Last Answer : Answer: C

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Description : If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Last Answer : ANSWER: 9 FARADS

A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Description : A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Last Answer : ANSWER: X -- 5 x 10-2 FARADS

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

In a capacitor start single-phase induction motor, the capacitor is connected in: ...

Description : In a capacitor start single-phase induction motor, the capacitor is connected in:  (A) series with the main winding (B) series with the auxiliary winding (C) series with both the windings (D) parallel with the auxiliary winding .

Last Answer : In a capacitor start single-phase induction motor, the capacitor is connected in: series with the auxiliary winding 

When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially...

Description : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is ?

Last Answer : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is all right.

Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Description : Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Last Answer : Ans: B

The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Last Answer : Answer: C

The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Last Answer : Answer: D

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Description : To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Last Answer : D. add a capacitor in series

Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Description : Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Last Answer : C. add an inductor series

What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Description : What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Last Answer : A. The antenna’s resonant frequency will increase

How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

When we connect the large capacitor bank in series ?

Description : When we connect the large capacitor bank in series ?

Last Answer : A :we connect large capacitor bank in series to improve the voltage power supply at the load end in balanced transmission line when there is considerable voltage drop along the balanced transmission line due ... - %6 )of the rated high terminal voltage )the large capacitor bank is used in series.

Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Description : Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Last Answer : 200 mF

When we connect the capacitor bank in series?

Description : When we connect the capacitor bank in series?

Last Answer : We connect capacitor bank in series to improve the voltage profile at the load end in transmission line there is considerable voltage drop along the transmission line due to impedance of the line. so in order to ... i.e (+ or - %6 )of the rated terminal voltage the capacitor bank is used in series

Transient stability can be improved by a) By putting series capacitor b) By using dynamic resister c) Auto re-closers d) All of the above

Description : Transient stability can be improved by a) By putting series capacitor b) By using dynamic resister c) Auto re-closers d) All of the above

Last Answer : Ans: All of the above

In a capacitor filter, is the capacitor in series or in parallel with the load?

Description : In a capacitor filter, is the capacitor in series or in parallel with the load?

Last Answer : Parallel.

In a capacitor filter, is the capacitor in series or parallel with the load?

Description : In a capacitor filter, is the capacitor in series or parallel with the load?

Last Answer : Parallel.

What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Description : At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Last Answer : At the instant of the initiation of the action.

State the advantages and disadvantages of series inductor and shunt capacitor filter.

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

Series and parallel capacitor problem

Description : Series and parallel capacitor problem

Last Answer : Series and parallel capacitor problem 1 : https://youtu.be/MSl5mRwtjAE Series and parallel capacitor problem 2 : https://youtu.be/yGwbpyEtIyw Series and parallel capacitor problem 3 : https:// ... https://youtu.be/_7KwEwWqiNU Series and parallel capacitor problem 10 : https://youtu.be/et8MCWV_OyE

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

In a capacitor start and run motors the function of the running capacitor in series with the auxiliary winding is to?

Last Answer : In a capacitor start and run motors the function of the running capacitor in series with the auxiliary winding is to improve power factor.

A `100 V` voltmeter of internal resistance `20 k Omega` in series with a high resistance `R` is connected to a `110 V` line. The voltmeter reads `5 V`

Description : A `100 V` voltmeter of internal resistance `20 k Omega` in series with a high resistance `R` is connected to a `110 V` line. The voltmeter reads `5 V`

Last Answer : A `100 V` voltmeter of internal resistance `20 k Omega` in series with a high resistance `R` is ... B. `315kOmega` C. `420kOmega` D. `440kOmega`

A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the proper connections for across the line starting B. the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Description : A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the ... the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Last Answer : Answer: D

As shown in the illustration, which of the listed types of motor controllers and starters is indicated? EL-0012 A. Across-the-line B. Capacitor C. Autotransformer D. Part-winding

Description : As shown in the illustration, which of the listed types of motor controllers and starters is indicated? EL-0012 A. Across-the-line B. Capacitor C. Autotransformer D. Part-winding

Last Answer : Answer: C

These are a series of riddles. They are all connected. 1) There are 100 bricks on a plane. One falls off. How many are left? 2) What are the three steps to put an elephant in a fridge? 3) What are the four steps to put a giraffe in a fridge? 4) A lion was having a party and he invited all the animals. All of them came except one. Which one was it? 5) A lady crossed a crocodile infected river and survived. How? 6) She crossed back and died. How? -Riddles

Description : These are a series of riddles. They are all connected. 1) There are 100 bricks on a plane. One falls off. How many are left? 2) What are the three steps to put an elephant in a fridge? 3) ... 5) A lady crossed a crocodile infected river and survived. How? 6) She crossed back and died. How? -Riddles

Last Answer : 1) 99 2) Open the door, put the elephant in, close the door. 3) Open the door, take the elephant out, put the giraffe in, close the door. 4) The giraffe. It was in the fridge. 5) The crocodiles were at the party. 6) The brick from the plane hit her in the head.