Future energy use is likely to vary if you change____ of your business a) Labour. b) Funds c) Aspects d) Efficiency

Future energy use is likely to vary if you change____ of your business
a) Labour. b) Funds
c) Aspects d) Efficiency
by

1 Answer

Answer :

Aspects
by

Related questions

Which statement is correct regarding the relationship between internal auditing and the external auditor? a. Some judgments relating to the audit of the financial statements are those of the internal auditor. b. The external audit function's objectives vary according to management's requirements. c. Certain aspects of internal auditing may be useful in determining the nature, timing and extent of external audit procedures. d. The external auditor is responsible for the audit opinion expressed, however that responsibility may be reduced by any use made of internal auditing

Description : Which statement is correct regarding the relationship between internal auditing and the external auditor? a. Some judgments relating to the audit of the financial statements are those of the ... opinion expressed, however that responsibility may be reduced by any use made of internal auditing

Last Answer : Certain aspects of internal auditing may be useful in determining the nature, timing and extent of external audit procedures.

Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases with pressure ratio C. Its volumetric efficiency does not vary with change in clearance ratio and pressure ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Description : Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases ... ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Last Answer : ANSWER : D

In any industry,the three top operating expenses are often Found to be energy a) electrical & thermal. c) none b) labour and materials. d) option a & b

Description : In any industry,the three top operating expenses are often Found to be energy a) electrical & thermal. c) none b) labour and materials. d) option a & b

Last Answer : option a & b

Suppose a child is devoid of social efficiency then what measures will you adopt to overcome this difficulty? Options: A) Imparting him training to overcome the difficulty B) Mentioning the positive aspects of it C) Giving threats of its deficiency D) Admitting the child in a clinic

Description : Suppose a child is devoid of social efficiency then what measures will you adopt to overcome this difficulty? Options: A) Imparting him training to overcome the difficulty B) Mentioning the positive aspects of it C) Giving threats of its deficiency D) Admitting the child in a clinic

Last Answer : Imparting him training to overcome the difficulty

When describing Organizational Culture, some Mgt Thinkers use expressions such as ------- “ the way things are around here”. In relation to this statement, which of the following is the most urgent task of Strategists ? A. To build a future based solely on the existing culture B. To investigate the taken-for-granted aspects of the culture C. To make changes in Control Systems so that the culture changes D. To make structural changes so that the culture changes

Description : When describing Organizational Culture, some Mgt Thinkers use expressions such as ------- the way things are around here . In relation to this statement, which of the following is the ... in Control Systems so that the culture changes D. To make structural changes so that the culture changes

Last Answer : To investigate the taken-for-granted aspects of the culture

Which of the following is not an assumption underlying testing and measurement? a. Various approaches to measuring aspects of the same thing can be useful b. Error is rarely present in the measurement process c. Present-day behavior predicts future behavior d. Testing and assessment benefit society

Description : Which of the following is not an assumption underlying testing and measurement? a. Various approaches to measuring aspects of the same thing can be useful b. Error is rarely present in the measurement process c. Present-day behavior predicts future behavior d. Testing and assessment benefit society

Last Answer : b. Error is rarely present in the measurement process

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

When effect of variations in specific heats is considered then how do maximum temperature and pressure vary compared to air standard cycle ?

Description : When effect of variations in specific heats is considered then how do maximum temperature and pressure vary compared to air standard cycle ?

Last Answer : Temperature increases and pressure decreases.

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : 200&100

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : a. 200&100

During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The  labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Last Answer : (d) 18,700

Which of these will likely vary most across different cultural contexts?

Description : Which of these will likely vary most across different cultural contexts?

Last Answer : Celebrating a wedding

The most likely explanation why the auditor’s examination cannot reasonably be expected to bring all illegal acts by the client to the auditor’s attention is that a. Illegal acts are perpetrated by management override of internal control. b. Illegal acts by clients often relate to operating aspects rather than accounting aspects. c. The client’s internal control may be so strong that the auditor performs only minimal substantive testing. d. Illegal acts may be perpetrated by the only person in the client’s organization

Description : The most likely explanation why the auditor's examination cannot reasonably be expected to bring all illegal acts by the client to the auditor's attention is that a. Illegal acts are perpetrated by ... testing. d. Illegal acts may be perpetrated by the only person in the client's organization

Last Answer : Illegal acts by clients often relate to operating aspects rather than accounting aspects

From the following which is the benefits of AS/RS a.Less product damage b.Good and easy housekeeping in FMS c.Reduce labour cost d.All of the above

Description : From the following which is the benefits of AS/RS a.Less product damage b.Good and easy housekeeping in FMS c.Reduce labour cost d.All of the above

Last Answer : d.All of the above

In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Description : In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Last Answer : Ans- a. more time and labour.  

The main purpose of agricultural processing (a) Increase production (c) Reduce labour (b) Increase speed of working (d) None

Description : The main purpose of agricultural processing (a) Increase production (c) Reduce labour (b) Increase speed of working (d) None

Last Answer : Increase production

Advantages of mechanisation is..... a) substitute for labour. c) amenity reasons b) attract or retain farm staff d) all of the above

Description : Advantages of mechanisation is..... a) substitute for labour. c) amenity reasons b) attract or retain farm staff d) all of the above

Last Answer : all of the above

The step towards development of an appropriate agricultural technique in india is working towards the motto of saving......... a) labour b) cost c) surplus labour d) all of the above

Description : The step towards development of an appropriate agricultural technique in india is working towards the motto of saving......... a) labour b) cost c) surplus labour d) all of the above

Last Answer : all of the above

In any industry three top operating expenses are found to be ________. a) wnergy. b) labour cost c) all of the above d) material

Description : In any industry three top operating expenses are found to be ________. a) wnergy. b) labour cost c) all of the above d) material

Last Answer : all of the above

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Description : ________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Last Answer : Recording

According to……………… ―energy audit‖ means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption a) Energy conservation act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Description : The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Last Answer : Star Rating

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Description : The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Last Answer : 2006

is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Description : is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Last Answer : Energy Audit

Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Description : Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Last Answer : 1 MARCH 2002

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution

_____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Description : _____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Last Answer : determining

Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Description : Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Last Answer : errors

The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Last Answer : Standards & Labelling.

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

Full form of ISEER is ______ A. Indian seasonal electric efficiency ratio B. Indian seasonal efficiency energy ratio C. International seasonal efficiency energy ratio D. Indian seasonal energy efficiency ratio

Description : Full form of ISEER is ______ A. Indian seasonal electric efficiency ratio B. Indian seasonal efficiency energy ratio C. International seasonal efficiency energy ratio D. Indian seasonal energy efficiency ratio

Last Answer : Indian seasonal energy efficiency ratio

Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (

Description : Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (W)

Last Answer : Cooling Capacity (W) + Power consumption (W)

Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Description : Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Last Answer : Bureau of Electric Efficiency

Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Last Answer : Energy Efficiency Ratio

BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Description : BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Last Answer : Bureau of Energy Efficiency

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

__________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Description : . __________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Last Answer : label

A star rating, ranging from ________ in the asending order of energy efficiency.imp A) 1 to 4. C) 1 to 5 B) 1 to 6. D) 1 to 10

Description : A star rating, ranging from ________ in the asending order of energy efficiency.imp A) 1 to 4. C) 1 to 5 B) 1 to 6. D) 1 to 10

Last Answer : 1 to 5

The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Description : The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Last Answer : Energy management

Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Description : Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Last Answer : Maximum energy efficiency

A waste heat recovery unit (WHRU) is an_________ that transfers heat from process outputs at high temperature to another part of the process for some purpose, usually increased efficiency. a) Energy recovery heat exchanger b) Energy recovery heat diffuser c) Both ‘a’ and ‘b’ d) None of the above

Description : A waste heat recovery unit (WHRU) is an_________ that transfers heat from process outputs at high temperature to another part of the process for some purpose, usually increased efficiency. a) Energy recovery heat exchanger b) Energy recovery heat diffuser c) Both ‘a’ and ‘b’ d) None of the above

Last Answer : Energy recovery heat exchanger

. How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Description : . How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Last Answer : All of above

How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Description : How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Last Answer : d. All of above

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP