Description : _____ energy costs to specific departments (energy/Accounting Centres) a] Recording c] Allocating b] Checking d] Determining
Last Answer : allocating
Description : Particular M&T system will involve the following: a] Checking c] Determining b] Allocating d] All of the above
Last Answer : all of the above
Description : ________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating
Last Answer : Recording
Description : Implementing management measures to correct any variances, which may have occurred _____. a] Recording c] Checking b] Controlling. d] Allocating
Last Answer : controlling
Description : ____ energy consumption to an appropriate standard or benchmark. a] Setting target c] Comparing. b] Reporting d] Allocating
Last Answer : comparing
Description : Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring
Last Answer : monitoring
Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None
Last Answer : Energy Performance
Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement
Last Answer : Energy substitution
Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None
Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above
Last Answer : Energy efficiency RATIO (EER).
Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards
Last Answer : Minimum energy performance standards
Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)? A. EER = 2.34 COP B. EER = 3.24 COP C. EER = 3.42 COP D. EER = 4.23 COP
Last Answer : EER = 3.42 COP
Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed? A. Cost efficiency rating B. Energy efficiency rating C. Coefficient of performance D. Cost of performance
Last Answer : Energy efficiency rating
Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio
Last Answer : Energy Efficiency Ratio
Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above
Last Answer : cooling
Description : Which of the following methods is the best method for determining nasogastric tube placement in the stomach? a) X-ray Radiologic identification of tube placement in the stomach is most reliable. ... for air bubbles is not a reliable method for determining nasogastric tube placement in the stomach.
Last Answer : a) X-ray Radiologic identification of tube placement in the stomach is most reliable.
Description : When using a function point estimation worksheet, there are 14 factors that impact the complexity of a project. These factors include _____. a. data communications, time tradeoffs, and ... programming language d. reports printed and PCA e. x-rays, extensibility, and operational conversion
Last Answer : b. end-user efficiency, data communications, and reusability
Description : A better indicators for cooling tower performance is _____. • Wet bulb temperature • Dry bulb temperature • Range • Approach
Last Answer : Approach
Description : ________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets
Last Answer : setting targets
Description : Explain the two types of memory management techniques, which are used for allocating memory. -Technology
Last Answer : Memory ManagementIt is the act of managing computer's primary memory or main memory. Main memory is a large array of words or bytes where each ward or byte has its ... your system configuration and requirement. Partitioned allocation divides primary memory of computer into multiple memory.
Description : What are the factors taken into consideration when allocating CPU to a process in o.s?
Last Answer : What are the factors taken into consideration when allocatingCPU to a process in o.s?
Description : Following is(are) the responsibility(ies) of the project manager. (A) Budgeting and cost control (B) Allocating resources (C) Tracking project expenditure
Last Answer : (C) Tracking project expenditure
Description : Shauna has recently been appointed as a project manager for Project SkyNorth, which is regarded as an important project in her organization. During the project planning meeting, ... b. Matrix organization c. Functional organization d. Projectized organization e. Hierarchical organization
Last Answer : d. Projectized organization
Description : Following is(are) the responsibility(ies) of the project manager. (A)Budgeting and cost control (B)Allocating resources (C)Tracking project expenditure (D)All of the above
Last Answer : (D)All of the above
Description : It is a process of ………………………… to develop computer that meets necessities a. Managing b. Allocating c. timing resources d. all the above
Last Answer : d. all the above
Description : In which of these areas might you face pressures? A. Working with colleagues from different functional areas within the organisation B. Meeting reporting deadlines C. Allocating bonuses D. all of the above
Last Answer : D. all of the above
Description : In which of these areas might you face pressures? A. Working with colleagues from different functional areas within the organisation B. Meeting reporting deadlines C. Allocating bonuses D. All of the above
Last Answer : D. All of the above
Description : ___________ involves allocating resources by detailing what activities haveto be done, the order in which they are to be completed, who is to do each,and when they are to be complete(d) (a) Benchmarking ; (b) Budgeting ; (c) Scheduling ; (d) Competitor intelligence
Last Answer : (b) Budgeting ;
Description : Allocating extrinsic rewards for behaviour that has been previously intrinsically rewarded tends to decrease the overall level of motivation, and is called: (a) Reward Evaluation Theory ; (b) Extrinsic Evaluation Theory ; (c) Cognitive Evaluation Theory (d) Intrinsic Evaluation Theory
Last Answer : (c) Cognitive Evaluation Theory
Description : Rearranging and allocating space in memory to provide for multiple computing tasks is called (1) Networking (2) Multiprogramming (3) Multitasking (4) Memory Management
Last Answer : Memory Management
Description : A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe
Last Answer : Answer: C
Description : In determining the scope and nature of services to be performed in public practice, a CPA firm should a. Have in place internal control procedures b. Only perform accounting related services c. ... that the performance of all services is consistent with the firm's members' role as professionals
Last Answer : Determine that the performance of all services is consistent with the firm's members' role as professionals
Description : The Competitive Intelligence Officer a. thinks like the competitor by determining how that competitor measures success, looks to the future as to what the competition will do in the next year ... . c. monitors the competition on the production analysis portion of the Courier and evaluates the
Last Answer : a. thinks like the competitor by determining how that competitor measures success, looks to the future as to what the competition will do in the next year to two years, and evaluate how the competition can undercut your company’s performance.
Description : When determining the most appropriate form of leadership, which of the following should be considered? (a) The manager (b) The group (c) The work environment (d) All the above [hint: Clearly there is ... , the group and the work environment. It is not enough to simply consider one of these aspects.]
Last Answer : All the above
Description : The most important criterion in determining whether conflict is functional or dysfunctional is: (a) overall morale. (b) turnover rates. ; (c) absenteeism levels. ; (d) group performance.
Last Answer : (d) group performance.
Description : The human relations view of conflict argues that conflict is: (a) an inevitable outcome in any group. (b) always a positive force in determining group performance. (c) always a negative force in determining group performance. (d) necessary for effective group performance.
Last Answer : (a) an inevitable outcome in any group.
Description : What is the formula for determining the efficiency of generator ?
Last Answer : Generator efficiency = (effective power * 100) / given power
Description : In determining whether the work of the internal auditors is likely to be adequate for purposes of the audit, the external auditor shall evaluate the internal auditor's a. Efficiency and experience b. Competence and objectivity c. Independence and review skills d. Training and supervisory skills
Last Answer : Competence and objectivity
Description : Heat balance of furnace provides means of determining the (A) Thermal efficiency of the process (B) Sources of heat losses (C) Scope of reduction of heat losses (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part
Last Answer : b.Checking 3D CAD data
Description : _____one is not the essential elements of M&T system. a] Recording c] Analyzing b] Source d] Checking
Last Answer : source
Description : A portable hand-held and is very handy for determining the power consumption and power factor of individual motors and other inductive devices. a) Voltmeter and wattmeter. b) Wattmeter and power factor meter. c) Light meter and flash meter.
Last Answer : Voltmeter and wattmeter.
Description : ____ the result including any variances from the targets which have been set. a] Reporting c] Determining b] Recording d] Highlighting
Last Answer : reporting
Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)
Last Answer : Plant Energy Performance (PEP)
Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking
Last Answer : Bench marking
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used
Description : Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers
Last Answer : Provide a certification to inform prospective purchasers
Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance
Last Answer : Allow consumers to compare the energy consumption of similar products
Description : The meaning of standard are a) Target limits on energy performance b) Well defined test protocols to obtain a sufficiently accurate estimate c) Both are correct d) Both are wrong
Last Answer : Both are correct