A consumer consume. 600 kWh per day at a load factor of 0.40....

A consumer consumes. 600 kWh per day at a load factor of 0.40. If the consumer increases the load factor of 0.70 without increasing the maximum demand, what is the consumption of energy in kWh?

by

1 Answer

Answer :

A consumer consume. 600 kWh per day at a load factor of 0.40. If the coneumer increases the load factor of 0.70 without increasing the maximum demand, 1050 kWh is the consumption of energy in kWh.

by

Related questions

What is the maximum value of a load which consume 500 KWh per day at...

Description : What is the maximum value of a load which consume 500 KWh per day at a load factor of 0.40, if the consumer increases the load factor of 0.50 without increasing the maximum demand?

Last Answer : 52.08 kW is the maximum value of a load which consume 500 KWh per day at a load factor of 0.40, if the consumer increases the load factor of 0.50 without increasing the maximum demand.

A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW.

Description : A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW. (1) 0.5 kW (2) 1 kW (3) 1.5 kW (4) 2 kW  

Last Answer : 1.5 kW 

An industrial consumer hall a daily load pattern of 2000 KW, 0.8 lag for...

Description : An industrial consumer hall a daily load pattern of 2000 KW, 0.8 lag for 12 Hra and 1000 kW UPF for 1J Hr. The load factor i= _____. 

Last Answer : An industrial consumer hall a daily load pattern of 2000 KW, 0.8 lag for 12 Hra and 1000 kW UPF for 1J Hr. The load factor i= 0.6 . 

19. For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Last Answer : Utility factor

For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Last Answer :  Energy Index parameter

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Last Answer : Energy Index parameter

An energy meter has a constant of 600 rev/kWh. If the meter makes 10 revolutions in 20 s, ...

Description : An energy meter has a constant of 600 rev/kWh. If the meter makes 10 revolutions in 20 s, what is the load in kW?  (A) 0.75 kW (B) 1.5 kW (C) 3 kW (D) 6 kW 

Last Answer : 1.5 kW 

A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. ...

Description : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is?

Last Answer : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is 1.316.

A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities...

Description : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 

Last Answer : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 103.2 MW, 51.61 .

A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a

Description : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained constant at 11 kV. The per ... 11 kV is  (A) 100 MVAR (B) 10.1 MVAR (C) -100 MVAR (D) -10.1 MVAR

Last Answer : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained ... load to increase the line-to-line voltage at the load terminals to 11 kV is -10.1 MVAR

Load factor is the

Description : Load factor is the  (1) Ratio of maximum load on the station to sum of consumer's maximum load.  (2) Ratio of average demand to maximum demand.  (3) Factor used for increasing load.  (4) Reciprocal of (1).

Last Answer : Load factor is the Ratio of average demand to maximum demand. 

A transformer has negative voltage regulation when its load power factor is

Description : A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Last Answer : 0

The load duration curve for unity load factor will be of

Description : The load duration curve for unity load factor will be of  (1) Rectangular shape (2) Triangular shape (3) L -shape (4) I -shape

Last Answer : The load duration curve for unity load factor will be of Rectangular shape

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

A generating st ation has a maximum, demand of 20 mW, load factor of 60%,...

Description : A generating st ation has a maximum, demand of 20 mW, load factor of 60%, a plant capacity factor of 50% and a plant Use factor of 72%. What is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded?

Last Answer : 5 MW is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded.

A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor...

Description : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be

Last Answer : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be 720 MW.

The time taken for a surge to travel a 600 km long overhead transmission line is?

Description : The time taken for a surge to travel a 600 km long overhead transmission line is?

Last Answer : The time taken for a surge to travel a 600 km long overhead transmission line is 0.002s.

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Description : The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Last Answer : (C) 18 kWh/ton

Which of the following statements is NOT true about the concept of a customer ? 1. A customer and consumer are always the same thing - the terms are 2. completely interchangeable 3. customers can be described as clients 4. a customer doesn't necessarily consume the product that they have purchased 5. customers are satisfied clients

Description : Which of the following statements is NOT true about the concept of a customer ? 1. A customer and consumer are always the same thing - the terms are 2. completely interchangeable 3. ... customer doesn't necessarily consume the product that they have purchased 5. customers are satisfied clients

Last Answer : customers are satisfied clients

Consumption demand does not depend upon the level of (a) Income ; (b) Propensity to consume ; (c) Consumer spending ; (d) Marginal efficiency of investment.

Description : Consumption demand does not depend upon the level of (a) Income ; (b) Propensity to consume ; (c) Consumer spending ; (d) Marginal efficiency of investment.

Last Answer : (d) Marginal efficiency of investment.  

A single phase energy meter has a constant of 1200 revolution/kWh. When a load of 200 W is connected,...

Description : A single phase energy meter has a constant of 1200 revolution/kWh. When a load of 200 W is connected, the disc rotates at 4.2 revolutions per min. If the load is on for 10 hours, the meter records an excess of   (a) 0.1 kWh (b) 0.2 kWh (c) 1.0 kWh (d) 2.0 kWh 

Last Answer : 2

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Last Answer :  Energy Index parameter 

A 5 BHP engine running at full load would consume diesel of the order of A. 0.3 kg/hr B. 1 kg/hr C. 3 kg/hr D. 5 kg/hr

Description : A 5 BHP engine running at full load would consume diesel of the order of A. 0.3 kg/hr B. 1 kg/hr C. 3 kg/hr D. 5 kg/hr

Last Answer : ANSWER ; B

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (C) 1000 hrs.

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (E) 2000 hrs.

How much do you pay per kilowatt-hour (kwh) for your electricity?

Description : How much do you pay per kilowatt-hour (kwh) for your electricity?

Last Answer : 1. there are three levels of pricing, depending on how much is used 0-700 =0.093 700-1000=0.157 over1000 = 0.175 per KWH in the summer. This varies seasonally 2. Northern California 3.Natural ... therms (seasonal) 0.968 above that 1.213 3. Gasoline for automobile $2.83.9 (yesterday, changes daily)

What is the average kWh usage per house in the US?

Description : What is the average kWh usage per house in the US?

Last Answer : Depends on the total connected load of the house.

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg

As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Description : As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Last Answer : kwh

99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : 99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg.

95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Description : 95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Last Answer : kwh

At present, in terms of per capita energy consumption (kWh/year), identify the correct sequence. (A) Brazil > Russia > China > India (B) Russia > China > India > Brazil (C) Russia > China > Brazil > India (D) China > Russia > Brazil > India

Description : At present, in terms of per capita energy consumption (kWh/year), identify the correct sequence. (A) Brazil > Russia > China > India (B) Russia > China > India > Brazil (C) Russia > China > Brazil > India (D) China > Russia > Brazil > India

Last Answer : (C) Russia > China > Brazil > India

The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh....

Description : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be

Last Answer : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be 13.80 rpm

How many chickens does China consume as a nation, per day/month/year?

Description : How many chickens does China consume as a nation, per day/month/year?

Last Answer : 648,246,212 per week. You can cite me to your teacher as the source.

What is the most fat we should consume per day according to dietary guideline?

Description : What is the most fat we should consume per day according to dietary guideline?

Last Answer : according to dietary guidelines

Can a woman still lose 1 pound per week of body fat if she does not exercise but is careful not to consume more than 2000 calories on any given day?

Description : Can a woman still lose 1 pound per week of body fat if she does not exercise but is careful not to consume more than 2000 calories on any given day?

Last Answer : You can find tips on how to lose weight and calories at the following website that provide to help you, http://www.aworkoutroutine.com/how-to-lose-fat/.

Medieval peasants would consume up to how many calories per day?

Description : Medieval peasants would consume up to how many calories per day?

Last Answer : 4,500

A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is

Description : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is?

Last Answer : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is 1.088 p.u.

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

The connected load of a consumer is 2 kW and his maximum demand is 1.5 kW. The load factor of the

Description : The connected load of a consumer is 2 kW and his maximum demand is 1.5 kW. The load factor of the consumer is (a) 0.375 (b) 0.75 (c) 1.33 (d) None of these  

Last Answer : a

The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is

Description : The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is (1) 10.15% (2) 41.6 % (3) 50 % (4) 60% 

Last Answer : Total maximum demand of energy in a day = 2kw*24= 48 units Consumer consumption is 20 units . Load factor = (number of units utilizing)/(total max. demand)      = 20/48 = 41.6%

Speed of sound in water is 1500 m s-1, depth of water when reflected sound waves are detected after 0.40 s is A. 700 m B. 600 km C. 600 m D. 750 km

Description : Speed of sound in water is 1500 m s-1, depth of water when reflected sound waves are detected after 0.40 s is A. 700 m B. 600 km C. 600 m D. 750 km

Last Answer : 600 m

Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash flow pattern B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return. C. The sequence of +Rs.100, -Rs.1,100, and Rs.1,600 is a conventional cash flow pattern. D. The sequence of -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Description : Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash ... -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Last Answer : B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return.

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

The per unit impedance ofa circuit element is 0.15. If the base kV and...

Description : The per unit impedance ofa circuit element is 0.15. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be?

Last Answer : The per unit impedance ofa circuit element is 0.15. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be 0.30.

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Description : The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Last Answer : ANSWER : B