Hand rotary duster consists basically of a blower completely with ..........and a hopper. a. Clutch. c. Flywheel. d. None of above Ans- b. gearbox

1 Answer

Answer :

Ans-    b. gearbox

Related questions

Description : The device for engaging and disengaging the power shaft from the gearbox is known as 1. shaft 2. Gear 3. Clutch 4. circuit

Last Answer : ans 3

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch

Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Last Answer : (A) Engine and clutch

Description : This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Last Answer : Ans-    a. Syndicator

Description : Motoried knapsack duster is commonly in a) America b) India c) France d) None of the above

Last Answer : India

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

Description : The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Last Answer : Seed metering mechanism  

Description : Equipment used for pulverizing the coal is known as (A) Ball mill (B) Hopper (C) Burner (D) Stoker

Last Answer : Ball mill

Description : Explain Briefly The Use Of Clutch?

Last Answer : Clutch is used to connect and disconnect the driving and driven units of a machine. It does the function when machine speed is changed after stopping the driving unit.

Description : A power tiller consist of the following main components a) Engine c) Transmission gear b) Clutch d) All of the above

Last Answer : All of the above

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

Description : Blower is part of: A. Planter. B. Zero till drill C. Pneumatic seed drill D. Till plant machine

Last Answer : Pneumatic seed drill

Description : The producer gas basically consists of a) Only CH4 b) CO & CH4 c) CO, H2 & CH4 d) Only CO & H2

Last Answer : c) CO, H2 & CH4

Description : State True or False. i) Master Development Plan basically is a schedule of various applications to be comprised. ii) It consists of start and finish dates of a system analysis, design implementation and maintenance activities. ... B) i-False, ii-True C) i-True, ii-False D) i-False, ii-False

Last Answer : A) i-True, ii-True

Description : Should the rev matching feature on the Nissan 370Z's manual gearbox have been put on the automatic instead? Why?

Last Answer : What do you mean? Syncro-mesh? That’s not exactly an exotic feature, and why would an automatic need it?

Description : Where is the gearbox inhibtor switch on L200?

Last Answer : automatic transmission

Description : Describe with schematic diagram working of constant mesh gearbox

Last Answer : -In constantmesh gearbox all the gears on the mainshaft are constantly mesh with layshaft gear & freely rotate on mainshaft. -When the clutch is in engaed position & gears ... than direction of mainshaft becomes reverse & reverse gear ratio obtained which is near about 3:1

Description : Describe with sketch the method of lubrication of synchromesh gearbox

Last Answer : Splash lubrication system : The splash lubricating system is simple to manufacture and implement in synchromesh gearbox. Lay shaft gear revolutions splash up lubricant from the sump to provide adequate ... the gear box 3. Selector mechanism is lubricated by thin machine oil/engine oil

Description : In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Last Answer : Reason of synchromesh gear box preferred over constant mesh gearbox  1) No need of double declutching as in case of constant mesh gearbox.  2) Smooth engagement of higher gears due to synchromesh ... lay shaft gears to main shaft gear and then to the main shaft through synchronizer device 

Description : The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Last Answer : a. 12 rad/sec

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

Description : A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Last Answer : b. 8 x 106

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

Description : Duster coats - how do they work?

Last Answer : answer:From Wikipedia: The original dusters were full-length, light-colored canvas or linen coats worn by horsemen to protect their clothing from trail dust. These dusters were typically slit up ... For better protection against rain, dusters were made from oilcloth and later from waxed cotton.

Description : What is the stuff in computer air duster?

Last Answer : answer:A typical product Tadio Shacks Electronic Cleaner MSDS here dangerous ingredient is basically hydrocarbon solvent

Description : Is anyone familiar with the Casabella Chenille Microfiber Floor Duster?

Last Answer : Takes too long to type. I wouldn’t trust it.

Description : Those of you that have used electronic duster before...help?

Last Answer : I use a can of spray for the laptop periodically. As long as your machine is switched off, I generally let mine cool down too so the cold isnt too much of a shock for it, and you dont blast it for too ... to get cold as you use it. Try not to spray it for much more than about 5 seconds at a time.

Description : Can I transplant a Baja Fairy Duster in August?

Last Answer : Need Answer

Description : when to transplant a baja fairy duster

Last Answer : Need Answer

Description : The cyanogas pump is a /an— (A) Duster (B) Fumigator (C) Sprayer (D) Emulsifier

Last Answer : (D) Emulsifier

Description : Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above

Last Answer : d) all of the above

Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

Description : What is a project phase? A. A collection of logically related project activities that culminate in the completion  of one or more deliverables (Ans.)  B. A singular activity that completes a ... that has very similar parts D. A consistent period of time that is used throughout a project

Last Answer : A. A collection of logically related project activities that culminate in the completion  of one or more deliverables (Ans.)

Description : Cloud Service consists of A. Platform, Software, Infrastructure B. Software, Hardware, Infrastructure C. Platform, Hardware, Infrastructure ANS:A

Last Answer : Platform, Software, Infrastructure

Description : How to run Ans Bangla completely free i.e. without any MB or money ?

Last Answer : Ans Bangla Free Basic does not exist so it cannot be run for free at this moment. However, Free Basic will be added very soon. Then you can use it for free.

Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Last Answer : c.Automated storage and retrieval system

Description : The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Last Answer : d. Rotary as well as translatory

Description : When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion

Last Answer : b. A circular motion

Description : What is the difference between stalling and surging in rotary compressions ?

Last Answer : Stalling is a local phenomenon and it occurs when How breaks away from the blades. Surging causes complete breakdown of flow and as such it affects the whole machine.

Description : What Is A Rotary Air Compressor?

Last Answer : A rotary-screw compressor is a type of gas compressor that uses a rotary-type positivedisplacement mechanism. They are commonly used to replace piston compressors where large volumes of high- ... either for large industrial applications or to operate high-power air tools such as jackhammers.

Description : What Is The Difference Between A Rotary Screw Compressor And A Reciprocating Compressors?

Last Answer : A rotary screw compressor is one that utilizes two intermeshing helical rotors to trap a volume of air, then compress it to a higher pressure. Rotary screw compressors can be run at lower ... piston compressor (aka reciprocating) uses pistons driven by a crankshaft to deliver air at high pressure.

Description : Power tillers operate most satisfactory with? 1. Rotary tillage 2. Plough 3. Transport carts 4. reapers

Last Answer : ans 1

Description : It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Last Answer : Ans-   b. Reciprocating mower  

Description : This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Last Answer : Ans-  b. twisted

Description : This type blades in rotary tiller are more effective in cutting weeds and they do not Pulverize the soil much. b. twisted c. straight d. None of the above

Last Answer : Ans- a. ‘L’