It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above
by

1 Answer

Answer :

Ans-   b. Reciprocating mower


 


by

Related questions

A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above

Description : A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above

Last Answer : <!-- [if !supportLists] -->a.  <!-- [endif] -->Ans-                     b. centre  

It is the link between the knife and crank wheel of the mower. a. connecting rod c. rod d. None of above

Description : It is the link between the knife and crank wheel of the mower. a. connecting rod c. rod d. None of above

Last Answer : Ans-                                     b. Pitman

Should a bread knife ideally be serrated?

Description : Should a bread knife ideally be serrated?

Last Answer : Most bread knives usually come serrated, wether that knife be bought in a set, or by itself. Serrated knives are by far the best for cutting bread.

is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Description : is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Last Answer : Cutter bar

cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Description : cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Last Answer : ans c

is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board

Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section

Last Answer :   <!-- [endif] -->Knife Section

The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct

Description : The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct

Last Answer : Rotary operation

Cylinder mower has rotating blades arranged in cylindrical form. a. Straight c. inclined. d. None of above

Description : Cylinder mower has rotating blades arranged in cylindrical form. a. Straight c. inclined. d. None of above

Last Answer : Ans-                     b. helical  

Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Last Answer : c) Spike tooth and hammer mill

Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Description : Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Last Answer : ans 2

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Last Answer : ans 3

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above

Description : 267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above

Last Answer : d)All of the above

A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Description : A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Last Answer : B. Rotary cultivation

Mark incorrect option a) RO is a stationary office of the RMS where work paper of the sections attached to it are prepared, checked and placed on record, all forms & bagsb) HRO is stationary office situated at the HQ of RMS Dnc) SRO is situated at the same station as a Mail office.d) None of these.

Description : Mark incorrect option a) RO is a stationary office of the RMS where work paper of the sections attached to it are prepared, checked and placed on record, all forms & bags. b) HRO is stationary office situated ... of RMS Dn c) SRO is situated at the same station as a Mail office. d) None of these

Last Answer : d) None of these

What are your thoughts on police detaining 3 Black women and 1 non-Black person, because they didn't reciprocate a neighbor's greeting?

Description : What are your thoughts on police detaining 3 Black women and 1 non-Black person, because they didn't reciprocate a neighbor's greeting?

Last Answer : I saw a video where the host said something to the effect that the women were at fault, because they didn’t wave back.

Why does Mexico want the US to open it's borders and relax it's immigration laws without being willing to reciprocate?

Description : Why does Mexico want the US to open it's borders and relax it's immigration laws without being willing to reciprocate?

Last Answer : Everyone has an agenda…right or wrong, good or bad. Your view depends on where you stand and what you have to gain or lose. And, there’s always the squeaky wheel element.

Do all states that issue tollroad/bridge toll transponders reciprocate with other states?

Description : Do all states that issue tollroad/bridge toll transponders reciprocate with other states?

Last Answer : answer:The best way to get an answer to that question would probably be from the International Bridge, Tunnel and Turnpike Association (IBTTA), the worldwide alliance of toll operators and associated ... I'm confident that they would be able to answer your question(s) accurately and completely.

Some students send a greeting card to you on teacher’s day. What will you do? You will Options: A) do nothing B) say thanks to them C) ask them to not to waste money D) reciprocate the good wishes to the

Description : Some students send a greeting card to you on teacher’s day. What will you do? You will Options: A) do nothing B) say thanks to them C) ask them to not to waste money D) reciprocate the good wishes to the

Last Answer : B) say thanks to them 

In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Description : In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Last Answer : ANSWER a. Haphazard motion of the gases in the chamber

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

Paper industry employs __________ driers.(A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Last Answer : (A) Cylinder

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Last Answer : Patela 

Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above

Description : Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peCylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above

Last Answer : M. Cylinder peripheral speed

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Last Answer : Ans-                              b. thresher  

Flail mower is a mower with high speed swinging knives, operating in a. horizontal plane c. Vertical plane d. None of above

Description : Flail mower is a mower with high speed swinging knives, operating in a. horizontal plane c. Vertical plane d. None of above

Last Answer : Ans-   b. either in the horizontal plane or in the vertical plane  

The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Description : The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Last Answer : Wearing Plate

is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Description : is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Last Answer : Knives gets break

is a machine to cut herbage crops and leave the them in swath. a) Wind rower b) Sickle mower c) Fail mower d) Gang mower

Description : is a machine to cut herbage crops and leave the them in swath. a) Wind rower b) Sickle mower c) Fail mower d) Gang mower

Last Answer : Sickle mower

How can I resharpen serrated steak knives?

Description : How can I resharpen serrated steak knives?

Last Answer : I have a wet-stone motor driven sharpener. I clean up the flat side, behind the serrations. The combination of a sharpen edge with serrations makes the knife very sharp. It was so sharp that I cut my wrist and still have the scar.

A list of 20 plants with Serrated leaves

Description : A list of 20 plants with Serrated leaves

Last Answer : Need Answer

What do you use serrated cooking knives for Meat or vegetables?

Description : What do you use serrated cooking knives for Meat or vegetables?

Last Answer : You would not need a serrated knife for either, unless your are planning to use a steak knife to cut a cooked meat product. If you buy brand new cooking knife it will cut both meat and vegetables, the only reason you would need a serrated knife would be for cutting bread.

Do serrated knives stay sharp longer?

Description : Do serrated knives stay sharp longer?

Last Answer : Yes, they do stay sharp longer. The points on the knife will dull out before the actual edge of the blade. As with all knives however, misuse will cause rapid dulling.

Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Description : Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Last Answer : (B) Serrated 

STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Description : STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Last Answer : b.triangular

In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Last Answer : a.helicoidal

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Last Answer : d.6

How many minimum numbers of zeros are there in ‘3 x 3’ triangular matrix? a.4 b.3 c.5 d.6

Description : How many minimum numbers of zeros are there in ‘3 x 3’ triangular matrix? a.4 b.3 c.5 d.6

Last Answer : b.3

Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Description : Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Last Answer : a. bh3/12

A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal

Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal

Last Answer : ans b

The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above

Description : The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above

Last Answer : Ans - c. fixed

is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow

Description : is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow

Last Answer :  Disc harrow

it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Last Answer : Spike tooth harrow

What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Last Answer : c.Automated storage and retrieval system