The basic action involved in sheep foot rolling is (A) Kneading (B) Pressing (C) Tamping (D) Vibration

The basic action involved in sheep foot rolling is
(A) Kneading
(B) Pressing
(C) Tamping
(D) Vibration
by

1 Answer

Answer :

(A) Kneading
by

Related questions

Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Description : Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Last Answer : Answer: Option D

The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator

Description : The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator

Last Answer : Answer: Option C

The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying

Description : The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying

Last Answer : Answer: Option A

Lowest level of staff/supervisor competent for TTM tamping operation in LWR/CWR. a. Gang Mate b. PWS c. PWI* d. Keyman.

Description : Lowest level of staff/supervisor competent for TTM tamping operation in LWR/CWR. a. Gang Mate b. PWS c. PWI* d. Keyman.

Last Answer : c. PWI*

Frequency of TTM tamping on PSC sleepers track a. 2 years or 100 GMT which ever is earlier* b. 2 years or 150 GMT which ever is earlier c. 1.5 years or 200 GMT which ever is earlier d. 2 years or 175 GMT which ever is earlier

Description : Frequency of TTM tamping on PSC sleepers track a. 2 years or 100 GMT which ever is earlier* b. 2 years or 150 GMT which ever is earlier c. 1.5 years or 200 GMT which ever is earlier d. 2 years or 175 GMT which ever is earlier

Last Answer : a. 2 years or 100 GMT which ever is earlier*

In the illustration, the component 'B' is attached to the component 'G' by _________. EL-0031 A. melting the top of 'G' and pressing 'B' onto it B. 'C' holding it in place C. sealing compound made of bituminous substance D. vacuum created in the battery by electrolytic action

Description : In the illustration, the component 'B' is attached to the component 'G' by _________. EL-0031 A. melting the top of 'G' and pressing 'B' onto it B. 'C' holding it in place C. sealing compound made of bituminous substance D. vacuum created in the battery by electrolytic action

Last Answer : Answer: C

Foot and mouth disease is common among (a) Birds (b) Goats and sheep only (c) Cattle only (d) Cattle, goats, sheep and other hoofed animals

Description : Foot and mouth disease is common among (a) Birds (b) Goats and sheep only (c) Cattle only (d) Cattle, goats, sheep and other hoofed animals

Last Answer : Ans: (d)

Which animal may suffer from foot and mouth disease? (1) Cattle (2) Cattle and sheep (3) Cattle and pigs (4) Cattle, sheep and pigs

Description : Which animal may suffer from foot and mouth disease? (1) Cattle (2) Cattle and sheep (3) Cattle and pigs (4) Cattle, sheep and pigs

Last Answer : (2) Cattle and sheep Explanation: Foot-and-mouth disease is an infectious and sometimes fatal viral disease that affects cloven-hoofed animals, including domestic and wild bovids. The virus causes ... Susceptible animals include cattle, water buffalo, sheep, goats, pigs, antelope, deer, and bison.

In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Last Answer : a) 5 centimeter*

State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Description : State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Last Answer : Types of Compaction Equipment: - i) Compaction by Rolling: - a) Smooth wheel rollers : Suitability: These rollers best suitable for 5ubgrade or base coarse compaction of cohesion less soils. ... : Suitable for compacting granular soils. with no fines in layer up to 1 m thickness

A tip for kneading, please?

Description : A tip for kneading, please?

Last Answer : Each cycle (or “knead”, as you say) involves pushing the dough out with the heel of the hand, then folding it back onto itself, then doing the ¼ turn.

Why does my kitty fall asleep while kneading?

Description : Why does my kitty fall asleep while kneading?

Last Answer : it’s like when humans get a massage, they close their eyes but aren’t necessarily asleep. my babies do this too. i think they just are enjoying themselves.

Do you think it's too late to start kneading at the age of 40?

Description : I want to start looking at it somehow.

Last Answer : I don't think it's too late! You can still have 10-15 good years in the sport and you don’t have to stop after that. :) 

Kneading brooms in a home bakery

Description : What is it like when the dough is mixed, then the whisks are taken out, or is it baked with them and then taken out of the finished bread?

Last Answer : Both are possible. If you have the time (and taste), you take care of the mixing and take out the "hooks" before baking. If you don't have time or you don't want to, you'll take them out of the loaf.

Why do cats like kneading and licking people?

Description : Why do cats like kneading and licking people?

Last Answer : because they like the people they like each other

Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Description : Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Last Answer : (C) Kneading

Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Description : Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Last Answer : (A) Mulling

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be (A) 8 kN.m (B) 15 kN.m (C) 30 kN.m (D) 60 kN.m

Description : A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be (A) 8 kN.m (B) 15 kN.m (C) 30 kN.m (D) 60 kN.m

Last Answer : (C) 30 kN.m

The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Description : The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Last Answer : (A) Limiting friction

The meatcentric height of a ship is 0.6 m and the radius of gyration is 4 m. The time of rolling of a ship is (A) 4.1 s (B) 5.2 s (C) 10.4 s (D) 14.1 s

Description : The meatcentric height of a ship is 0.6 m and the radius of gyration is 4 m. The time of rolling of a ship is (A) 4.1 s (B) 5.2 s (C) 10.4 s (D) 14.1 s

Last Answer : Answer: Option C

On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Last Answer : Answer: Option C

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

For a properly designed vehicle, the resistance generally ignored, is (A) Wind resistance (B) Rolling resistance (C) Grade resistance (D) Axle resistance

Description : For a properly designed vehicle, the resistance generally ignored, is (A) Wind resistance (B) Rolling resistance (C) Grade resistance (D) Axle resistance

Last Answer : Answer: Option D

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option A

The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Description : The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Last Answer : Answer: Option D

If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Description : If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Last Answer : Answer: Option A

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

If cross slope of a country is greater than 60%, the terrain is classified as(A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is greater than 60%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option C

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Description : The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Last Answer : Answer: Option A

In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Description : In highway construction, rolling starts from (A) Sides and proceed to center (B) Center and proceed to sides (C) One side and proceed to other side (D) Any of the above

Last Answer : Answer: Option A

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

The unit of measurement is per quintal for the following: (A) Collapsible gates with rails (B) Rolling shutters (C) Expanded metal wire netting (D) M.S. reinforcement of R.C.C. works

Description : The unit of measurement is per quintal for the following: (A) Collapsible gates with rails (B) Rolling shutters (C) Expanded metal wire netting (D) M.S. reinforcement of R.C.C. works

Last Answer : (D) M.S. reinforcement of R.C.C. works

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will (A) Reduce by 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Last Answer : (A) Reduce by 200 kg

The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Description : The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Last Answer : (B) 5515 kg

If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is (A) 30 kg (B) 300 kg (C) 900 kg (D) 1000 kg

Description : If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is (A) 30 kg (B) 300 kg (C) 900 kg (D) 1000 kg

Last Answer : (C) 900 kg

Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Description : Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Last Answer : (B) Loose sand

Forge pig may be converted to wrought iron by (A) Rolling (B) Pudding (C) Shingling (D) Refining

Description : Forge pig may be converted to wrought iron by (A) Rolling (B) Pudding (C) Shingling (D) Refining

Last Answer : Answer: Option B

Overland flow drainage on and from the tarmac of an airport invokes, in its design, principles involving : (a) Spatially varied flow without hydraulic jumps (b) Backwater flow (c) Subcritical flow throughout (d) Attention to rolling flows within spatially varied flows and possibly to moving hydraulic jumps

Description : Overland flow drainage on and from the tarmac of an airport invokes, in its design, principles involving : (a) Spatially varied flow without hydraulic jumps (b) Backwater flow (c) ... throughout (d) Attention to rolling flows within spatially varied flows and possibly to moving hydraulic jumps

Last Answer : (a) Spatially varied flow without hydraulic jumps

What are the most pressing environmental issues facing the world today, and how can they be addressed?

Description : What are the most pressing environmental issues facing the world today, and how can they be addressed?

Last Answer : There are many promising new developments in the field of medicine that have the potential to improve healthcare in the future. Here are a few examples: Gene editing: Gene editing technologies, ... . It has the potential to improve access to healthcare, particularly in rural and underserved areas.

Pressing question of the day: What's your favorite candy?

Description : Pressing question of the day: What's your favorite candy?

Last Answer : See’s Milk Chocolate almond cluster.

Why won't my neck tan? (This is bound to be the most pressing question ever asked on ask-public...:P)

Description : Why won't my neck tan? (This is bound to be the most pressing question ever asked on ask-public...:P)

Last Answer : answer:Sounds like you may be developing a mild case of Red Neck-itus Have you noticed any of the following symptoms? -teeth loosening? -craving for fried everything? -unexplainable new ... I recommend that all single string musical instruments be removed from your life immediately. Good luck!

Finger still numb after pressing down too hard on a stapler?

Description : Finger still numb after pressing down too hard on a stapler?

Last Answer : If it’s not getting better by tomorrow, make an appointment to see your GP. I don’t think it’s serious but maybe it’s a warning to not do so much stapling at once – or indeed any manual repetitive task

How do I add new search engines to Google Chrome's function of pressing tab to search a website?

Description : How do I add new search engines to Google Chrome's function of pressing tab to search a website?

Last Answer : answer:Auto-solved. http://www.google.com/support/chrome/bin/answer.py?hl=en&answer=95653

Does it cost money in NJ to unblock someones private cell phone number call pressing *69?

Description : Does it cost money in NJ to unblock someones private cell phone number call pressing *69?

Last Answer : I do not know the answer to your question about unblock, but I suggest you contact the phone company.

What is one of the pressing social and political issues of our time, and how would you address it?

Description : What is one of the pressing social and political issues of our time, and how would you address it?

Last Answer : Candidate accountability for solutions promised/proposed. We could ask them to say any number of things they expect to accomplish during their term. If they do not complete the majority have them ... jail as the number of promised projects that would have meant a majority of accomplished goals.

Why doesn't pressing ctrl = make the font enlarge when I am using msn?

Description : Why doesn't pressing ctrl = make the font enlarge when I am using msn?

Last Answer : Can you give the name of the problem browser? Each browser has its own short cuts for text resizing, so knowing which one is imperative.