In screen analysis, the notation +5 mm/-10 mm means particles passing through (A) 10 mm screen and retained on 5 mm screen (B) 5 mm screen and retained on 10 mm screen (C) Both 5 mm and 10 mm screens (D) Neither 5 mm nor 10 mm screen

In screen analysis, the notation +5 mm/-10 mm means particles passing
through
(A) 10 mm screen and retained on 5 mm screen
(B) 5 mm screen and retained on 10 mm screen
(C) Both 5 mm and 10 mm screens
(D) Neither 5 mm nor 10 mm screen
by

1 Answer

Answer :

(A) 10 mm screen and retained on 5 mm screen
by

Related questions

The use of coarse screens for the disposal of sewage, may be dispensed with by A. Comminutor B. Shredder C. Both A. and B. D. Neither A. nor B.

Description : The use of coarse screens for the disposal of sewage, may be dispensed with by A. Comminutor B. Shredder C. Both A. and B. D. Neither A. nor B.

Last Answer : ANS: C

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Description : A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Last Answer : (C) Screen is plugged with solid particles

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

Which of the following examines information passing through switches, hubs, or routers? a. Key logger b. Packet sniffer c. Log analysis tools d. Screen captures

Description : Which of the following examines information passing through switches, hubs, or routers? a. Key logger b. Packet sniffer c. Log analysis tools d. Screen captures

Last Answer : b. Packet sniffer

The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 m

Description : The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 mm

Last Answer : Answer: Option B

The spacing of bars of perforations of fine screens used for the treatment of sewage, is A. 2 to 3 mm B. 3 to 5 mm C. 5 to 8 mm D. 8 to 10 mm

Description : The spacing of bars of perforations of fine screens used for the treatment of sewage, is A. 2 to 3 mm B. 3 to 5 mm C. 5 to 8 mm D. 8 to 10 mm

Last Answer : ANS: A

An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 m

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Description : Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Last Answer : [ C ] both (a) and (b)

Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Description : Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Last Answer : [ C ] both (a) and (b)

Keynesian analysis is (a) A short run analysis. (b) Long run analysis. © Both short and long run analysis. (d) Neither short nor long run analysis.

Description : Keynesian analysis is (a) A short run analysis. (b) Long run analysis. © Both short and long run analysis. (d) Neither short nor long run analysis.

Last Answer : (a) A short run analysis.

Consider the following statements related to compiler construction: I. Lexical Analysis is specified by context-free grammars and implemented by pushdown automata. II. Syntax Analysis is specified by regular expressions and implemented by finite-state machine. Which of the above statement(s) is/are correct? (1) Only l (2) Only ll (3) Both I and II (4) Neither I nor Il

Description : Consider the following statements related to compiler construction: I. Lexical Analysis is specified by context-free grammars and implemented by pushdown automata. II. Syntax Analysis is specified by regular expressions and implemented by ... Only l (2) Only ll (3) Both I and II (4) Neither I nor Il

Last Answer : Answer: 4

Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Is anyone else bothered by commercials for televisions purporting to show how great the competition's screens are through your own television screen?

Description : Is anyone else bothered by commercials for televisions purporting to show how great the competition's screens are through your own television screen?

Last Answer : Pretty stupid, I guess.

Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Description : Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Last Answer : C. Both source and screen are at finite distance

For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

Which of the following screens has the maximum capacity? (A) Grizzlies (B) Trommels (C) Shaking screen (D) Vibrating screen

Description : Which of the following screens has the maximum capacity? (A) Grizzlies (B) Trommels (C) Shaking screen (D) Vibrating screen

Last Answer : (D) Vibrating screen

With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Description : With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Last Answer : (C) Decreases

The spacing of bars for perforations in coarse screens used for the treatment of sewage, is A. 20 mm B. 30 mm C. 40 mm D. 50 mm

Description : The spacing of bars for perforations in coarse screens used for the treatment of sewage, is A. 20 mm B. 30 mm C. 40 mm D. 50 mm

Last Answer : ANS: D

Which of the following documents are not admissible in evidence? (a) Documents improperly procured (b) Documents procured by illegal means (c) Both (a) & (b) (d) Neither (a) nor (b).

Description : Which of the following documents are not admissible in evidence? (a) Documents improperly procured (b) Documents procured by illegal means (c) Both (a) & (b) (d) Neither (a) nor (b).

Last Answer : (d) Neither (a) nor (b).

Maxim omnia proesumuntur rite esse acta means a) All the acts are presumed to be wrongly done b) All the acts are presumed to be rightly done c) Both the A and B d) Neither A nor B

Description : Maxim omnia proesumuntur rite esse acta means a) All the acts are presumed to be wrongly done b) All the acts are presumed to be rightly done c) Both the A and B d) Neither A nor B

Last Answer : a) All the acts are presumed to be wrongly done

Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Description : Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the  senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Last Answer : c) Both the A and B

A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Last Answer : c. 1 rps

Fraunhofer diffraction is observed when __________. A. Only screen is placed at finite distance B. source is placed at finite distance C. neither source nor screen is at finite distance D. None of these

Description : Fraunhofer diffraction is observed when __________. A. Only screen is placed at finite distance B. source is placed at finite distance C. neither source nor screen is at finite distance D. None of these

Last Answer : D. None of these

A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Description : A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Last Answer : (C) Such that at every point on it, the velocity is tangential to it

Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Description : Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Last Answer : c) either (a) or (b) *

Vibrating screens are used for handling large tonnages of materials. The vibrating motion is imparted to the screening surface by means of (A) Electromagnets (B) Cams or eccentric shafts (C) Unbalanced flywheels (D) Either (A), (B) or (C)

Description : Vibrating screens are used for handling large tonnages of materials. The vibrating motion is imparted to the screening surface by means of (A) Electromagnets (B) Cams or eccentric shafts (C) Unbalanced flywheels (D) Either (A), (B) or (C)

Last Answer : (D) Either (A), (B) or (C)

Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. In magnetic flow meters, voltage generation is (A) Due to the motion of conducting fluid through an externally generated uniform field (B) Proportional to the fluid velocity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : . In magnetic flow meters, voltage generation is (A) Due to the motion of conducting fluid through an externally generated uniform field (B) Proportional to the fluid velocity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Description : Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Last Answer : storage oscilloscope

Do you follow the advice to turn off blue light on your screen or just stop using screens before bedtime?

Description : Do you follow the advice to turn off blue light on your screen or just stop using screens before bedtime?

Last Answer : Wow, I didn’t know that was an option! I’m such a poor sleeper that I turn off the screens at least an hour before bed.

Is it better to work with two computer screens simultaneously or only one screen of 30 inches?

Description : Is it better to work with two computer screens simultaneously or only one screen of 30 inches?

Last Answer : answer:Both screens will probably have the same(or simmilar) resolution regardless of size so with a bigger screen you won't actually get that much more viewing space it wll just mean everything is bigger. I ... two screens (well actually I'd have six screen eyefinity set up if I could afford it).

Semi steel' is (A) Produced by adding 10-20% steel to the cupola charge (B) Stronger than cast iron (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Semi steel' is (A) Produced by adding 10-20% steel to the cupola charge (B) Stronger than cast iron (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Conservation of energy means that (a) energy can be created as well as destroyed (b) energy can be created but not destroyed (c) energy cannot be created but can be destroyed (d) energy can neither be created nor destroyed

Description : Conservation of energy means that (a) energy can be created as well as destroyed (b) energy can be created but not destroyed (c) energy cannot be created but can be destroyed (d) energy can neither be created nor destroyed

Last Answer : Ans:(d)

Conservation of energy means that (a) Energy can be created as well as destroyed (b) Energy can be created but not destroyed (c) Energy cannot be created but can be destroyed (d) Energy can neither be created nor destroyed

Description : Conservation of energy means that (a) Energy can be created as well as destroyed (b) Energy can be created but not destroyed (c) Energy cannot be created but can be destroyed (d) Energy can neither be created nor destroyed

Last Answer : Ans:(d)

‘Decree holder’ means (a) Any person against whom a decree has been passed (b) Any person in whose favour a decree has been passed or an order capable of execution has been made (c) Either a. or b. (d) Neither a. nor b.

Description : ‘Decree holder’ means (a) Any person against whom a decree has been passed  (b) Any person in whose favour a decree has been passed or an order  capable of execution has been made (c) Either a. or b. (d) Neither a. nor b.

Last Answer : (b) Any person in whose favour a decree has been passed or an order  capable of execution has been made (c) Either a. or b. (d) Neith

In the diagram shows below rays are coming from infinity and after passing through both the lenses meet on a screen placed at a distance of 30 cm from

Description : In the diagram shows below rays are coming from infinity and after passing through both the lenses meet on a screen placed at a distance of 30 cm from

Last Answer : In the diagram shows below rays are coming from infinity and after passing through both the lenses ... Calculate the focal length of the concave lens.