The value of 'B' of Indian type W.C. shown in the given figure is: (A) 45 cm (B) 50 cm (C) 30 cm (D) 25 cm

The value of 'B' of Indian type W.C. shown in the given figure is:
(A) 45 cm
(B) 50 cm
(C) 30 cm
(D) 25 cm
by

1 Answer

Answer :

(A) 45 cm
by

Related questions

The value of 'A' of Indian type W.C. shown in the given figure is: (A) 25 cm (B) 30 cm (C) 40 cm (D) 45 cm

Description : The value of 'A' of Indian type W.C. shown in the given figure is: (A) 25 cm (B) 30 cm (C) 40 cm (D) 45 cm

Last Answer : (B) 30 cm

The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Last Answer : (C) 500 mm

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm

Description : The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm

Last Answer : Answer: Option D

The length of the side of warning sign boards of roads is (A) 30 cm (B) 40 cm (C) 45 cm (D) 50 cm

Description : The length of the side of warning sign boards of roads is (A) 30 cm (B) 40 cm (C) 45 cm (D) 50 cm

Last Answer : Answer: Option C

The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is (A) (6 + 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Last Answer : (B) (6 + 12) chains

A design is made on a rectangular tile of dimensions 50 cm x 17 cm as shown in figure. -Maths 9th

Description : A design is made on a rectangular tile of dimensions 50 cm x 17 cm as shown in figure. -Maths 9th

Last Answer : According to question find the the total area of the design and the remaining area of the tiles.

A design is made on a rectangular tile of dimensions 50 cm x 17 cm as shown in figure. -Maths 9th

Description : A design is made on a rectangular tile of dimensions 50 cm x 17 cm as shown in figure. -Maths 9th

Last Answer : According to question find the the total area of the design and the remaining area of the tiles.

In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

The compression in concrete (fc) at failure is given by [ A ] 0.30 fck [ B ] 0.45 fck [ C ] 0.50 fck [ D ] 0.75 fck

Description : The compression in concrete (fc) at failure is given by [ A ] 0.30 fck [ B ] 0.45 fck [ C ] 0.50 fck [ D ] 0.75 fck

Last Answer : [ B ] 0.45 fck

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

A converging lens forms a three times magnified image of an object, which can be take on a screen. If the focal length of the lens is 30 cm, then the distance of the object from the lens is (a) - 55 cm (b) - 50 cm (c) - 45 cm (d) - 40 cm

Description : A converging lens forms a three times magnified image of an object, which can be take on a screen. If the focal length of the lens is 30 cm, then the distance of the object from the lens is (a) - 55 cm (b) - 50 cm (c) - 45 cm (d) - 40 cm

Last Answer : (d) - 40 cm

Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than (A) 25 cm (B) 20 m (C) 45 m (D) 10 m

Description : Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10,  the sight on the up slope must be less than  (A) 25 cm  (B) 20 m  (C) 45 m  (D) 10 m

Last Answer : (C) 45 m 

An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is (A) Safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Description : An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is ( ... shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Last Answer : Answer: Option A

The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Description : The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option C

If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Description : Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option D

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is (A) 1 in 60 (B) 1 in 45 (C) 1 in 30 (D) 1 in 15

Description : If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is (A) 1 in 60 (B) 1 in 45 (C) 1 in 30 (D) 1 in 15

Last Answer : Answer: Option C

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

In India post-harvest losses of fruit and vegetable is… per cent of the total production. a) 15-20 b) 50-50 c) 40-45 d) 25-30

Description : In India post-harvest losses of fruit and vegetable is… per cent of the total production. a) 15-20 b) 50-50 c) 40-45 d) 25-30

Last Answer : a) 15-20

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Description : Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Last Answer : c. 30 to 40

I bought 15 pens and sold 12 of them at the cost price of 18 pens. What is the profit percentage? a) 50 b) 25 c) 30 d) 45

Description : I bought 15 pens and sold 12 of them at the cost price of 18 pens. What is the profit percentage? a) 50 b) 25 c) 30 d) 45

Last Answer : a) 50

A shopkeeper bought 30 kg of wheat at the rate of Rs 45 per Kg. He sold 40% of the total quantity at the rate of Rs 50 per Kg. Approximately, at what price per Kg should he sell the remaining quantity to make 25 per cent overall profit? 1. Rs 54 2. Rs 52 3. Rs 50 4. Rs 60

Description : A shopkeeper bought 30 kg of wheat at the rate of Rs 45 per Kg. He sold 40% of the total quantity at the rate of Rs 50 per Kg. Approximately, at what price per Kg should he sell the remaining quantity to make 25 per cent overall profit? 1. Rs 54 2. Rs 52 3. Rs 50 4. Rs 60

Last Answer : 4. Rs 60

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.

In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Last Answer : 60 millivolts.

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

For providing an Indian type W.C., the R.C.C. slabs in the toilet portion A. Should be sunk by 20 cm B. Should be kept 20 cm above the adjacent portion C. Should be sunk by 50 cm D. Need not be sunk

Description : For providing an Indian type W.C., the R.C.C. slabs in the toilet portion A. Should be sunk by 20 cm B. Should be kept 20 cm above the adjacent portion C. Should be sunk by 50 cm D. Need not be sunk

Last Answer : ANS: C

In the given figure, OACB is a quadrant of a circle of radius 7 cm. The perimeter of the quadrant is (a) 11 cm (b) 18 cm (c) 25 cm (d) 36 cm

Description : In the given figure, OACB is a quadrant of a circle of radius 7 cm. The perimeter of the quadrant is (a) 11 cm (b) 18 cm (c) 25 cm (d) 36 cm

Last Answer : (c) 25 cm

Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Last Answer : (C) Rs. 450

The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is (A) b - rd)²/(r - s) (B) b - rd)²/(r + s) (C) ½ × (b + rd)²/(r - s) (D) b - rd)²/(s - r)

Description : The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is (A) b - rd)²/(r - s) (B) b - rd)²/(r + s) (C) ½ × (b + rd)²/(r - s) (D) b - rd)²/(s - r)

Last Answer : (A) b - rd)²/(r - s)

The area of the cross-section of a road fully in banking shown in the given figure, is (A) [sb² + r² (2bd + sd)²]/(r² - s²) (B) [sb² + r² (2bd + sd)²]/(r² - s5 ) (C) [sb² + r² (2bd + sd)²]/(r - s) (D) None of these

Description : The area of the cross-section of a road fully in banking shown in the given figure, is (A) [sb² + r² (2bd + sd)²]/(r² - s²) (B) [sb² + r² (2bd + sd)²]/(r² - s5 ) (C) [sb² + r² (2bd + sd)²]/(r - s) (D) None of these

Last Answer : (A) [sb² + r² (2bd + sd)²]/(r² - s²)

The three time estimates for the activities of the network shown in the given figure are shown above their arrows. The earliest expected time for the event 4, is (A) 19 (B) 14 (C) 24 (D) None of these

Description : The three time estimates for the activities of the network shown in the given figure are shown above their arrows. The earliest expected time for the event 4, is (A) 19 (B) 14 (C) 24 (D) None of these

Last Answer : (A) 19

For the network shown in the given figure, the expected time for the activity (A) 1-2 is 4 (B) 2-3 is 7 (C) 3-4 is 8 (D) All the above

Description : For the network shown in the given figure, the expected time for the activity (A) 1-2 is 4 (B) 2-3 is 7 (C) 3-4 is 8 (D) All the above

Last Answer : (D) All the above

The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Description : The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Last Answer : ANSWER: Y -- BETWEEN 25 AND 50% HOLLOW

In the given figure, ABC is an equilateral triangle of side length 30 cm. XY is parallel to BC, XP is parallel to AC and YQ is parallel to AB. -Maths 9th

Description : In the given figure, ABC is an equilateral triangle of side length 30 cm. XY is parallel to BC, XP is parallel to AC and YQ is parallel to AB. -Maths 9th

Last Answer : answer:

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Last Answer : (D) 18° 15' L

On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Description : On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Last Answer : Answer: Option C

A kite in the shape of a square with a diagonal 32 cm and an isosceles triangle of base 8 cm and sides 6 cm each is to be made of three different shades as shown in figure. -Maths 9th

Description : A kite in the shape of a square with a diagonal 32 cm and an isosceles triangle of base 8 cm and sides 6 cm each is to be made of three different shades as shown in figure. -Maths 9th

Last Answer : Each shade of paper is divided into 3 triangles i.e., I, II, III 8 cm For triangle I: ABCD is a square [Given] ∵ Diagonals of a square are equal and bisect each other. ∴ AC = BD = 32 cm Height of AABD ... are: Area of shade I = 256 cm2 Area of shade II = 256 cm2 and area of shade III = 17.92 cm2

A solid is shown in the figure below. The vertices ABCDEFGH form a 4 cm × 2 cm × 2 cm cuboid. The segments AI and DI are both of length 5 cm, and points ICGFB are coplanar. What is the height (in cm) of point I from the base rectangle EFGH?

Description : A solid is shown in the figure below. The vertices ABCDEFGH form a 4 cm × 2 cm × 2 cm cuboid. The segments AI and DI are both of length 5 cm, and points ICGFB are coplanar. What is the height (in cm) of point I from the base rectangle EFGH? 

Last Answer : 4.80-4.84

Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Description : Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Last Answer : B [25 cm]

The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm

Description : The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm

Last Answer : (D) 100 cm

A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm