Description : no super elevation is provided on a road along curves, pot holes may develop at (A) Inner edge of the road (B) Outer edge of the road (C) Centre of the road (D) Nowhere on the road
Last Answer : Answer: Option B
Description : Raising of outer edge of a road with respect to inner edge, is known (A) Super elevation (B) Cant (C) Banking (D) All the above
Last Answer : Answer: Option D
Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these
Last Answer : Answer: Option C
Description : Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these
Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2
Last Answer : Answer: Option A
Description : Width of the shoulders of carriage way is generally kept (A) 100 cm (B) 125 cm (C) 150 cm (D) 250 cm
Description : An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is ( ... shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section
Description : An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is ... breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm
Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column
Description : A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70
Description : The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these
Description : Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall
Description : The full width of land acquired before finalising a highway, alignment is known (A) Width of formation (B) Right of way (C) Carriage way (D) Roadway
Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above
Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature
Description : If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is (A) WV/gr (B) W²V/gr (C) WV²/gr (D) WV/gr²
Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle
Description : If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is (A) 1 in 60 (B) 1 in 45 (C) 1 in 30 (D) 1 in 15
Description : Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm
Description : A hemispherical bowl is made of steel, 0.25 cm thick. The inner radius of the bowl is 5cm. Find the outer curved surface of the bowl. -Maths 9th
Last Answer : Inner radius of hemispherical bowl = 5cm Thickness of the bowl = 0.25 cm Outer radius of hemispherical bowl = (5+0.25) cm = 5.25 cm Formula for outer CSA of hemispherical bowl = 2πr2, where r is radius of ... 22/7) (5.25)2 = 173.25 Therefore, the outer curved surface area of the bowl is 173.25 cm2.
Description : The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2 , safe shear stress 5 kg/cm2 and B.M. 24 mt, (A) Is safe in shear (B) Is unsafe in shear (C) Is over safe in shear (D) Needs redesigning
Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2
Last Answer : c. 20.120 N/mm2
Description : An epithelial tissue which has thin flat cells, arranged edge to edge so as to appear like closely packed tiles, is found to be present at (a) outer surface of ovary (b) inner lining of Fallopian tube (c) inner lining of stomach (d) inner lining of cheeks.
Last Answer : (d) inner lining of cheeks.
Description : The outer and the inner radii of a hollow sphere are 12 cm and 10 cm. Find its volume. -Maths 9th
Last Answer : This answer was deleted by our moderators...
Description : The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are: (A) b = 57.73 cm d = 81.65 cm (B) b = 81.65 cm d = 57.73 cm (C) b = 50.00 cm d = 50.00 cm (D) b = 40.00 cm d = 80.00 cm
Last Answer : (A) b = 57.73 cm d = 81.65 cm
Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16
Description : Two columns 50 cm 50 cm and 60 cm 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t ... the foundation slab = 7.00 m (C) Area of footing slab = 11.00 m2 (D) All the above
Last Answer : Option D
Description : In a single span bridge, the clear span is the distance between a) Centres of Abutments b) Inner faces of Abutments* c) Outer faces of Abutments d) Width of Abutment
Last Answer : b) Inner faces of Abutments*
Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above
Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR
Last Answer : (D) GV²/gR
Description : Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %
Description : To ensure that bullock carts may not overturn on curves, the maximum value of super-elevation, recommended by I.R.C., is (A) 1 in 10 (B) 1 in 12 (C) 1 in 15 (D) 1 in 20
Description : Cooling Towers vary from size of 40 metres to a) 400 b) 120 c) 450 d) 560
Last Answer : a) 400
Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175
Last Answer : (A) 165.4
Description : If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance
Last Answer : (B) Always between h1 and h2
Description : The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m
Last Answer : Ans: (c) Correct Answer is: 0.45 m
Description : The length and width of a swimming pool are 50 metres and 15 metres respectively. If the depth of the swimming pool at one end is 10 -Maths 9th
Last Answer : 11250 m3 If we take the vertical crossection of the face of the swimming pool, then it is a trapezium ABCD, with parallel sides AD and BC respectively of lengths 10 m and 20 m and distance between parallel sides as 50 m ... 50]×15[12(10+20)×50]×15 m3 = (15 x 50 x 15) m3 = 11250 m3.
Description : A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4cm. -Maths 9th
Last Answer : Let r1 and r2 Inner and outer radii of cylindrical pipe r1 = 4/2 cm = 2 cm r2 = 4.4/2 cm = 2.2 cm Height of cylindrical pipe, h = length of cylindrical pipe = 77 cm (i) curved surface ... CSA of roller = (500 31680) cm2 = 15840000 cm2 = 1584 m2. Therefore, area of playground is 1584 m2. Answer!
Description : The outer and inner diameters of a circular pipe are 6 cm and 4 cm respectively. If its length is 10 cm, then what is the total surface -Maths 9th
Last Answer : answer:
Description : A hollow shaft has an inner diameter of 3.7 cm and an outer diameter of 4.0 cm. A 1 kN-m torque is applied to this shaft. What is the shear stress at the mid-radius of this shaft? (a) 117Mpa (b) 178 Mpa (c) 286 Mpa (d) 363 Mpa
Last Answer : (c) 286 Mpa
Description : The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m
Last Answer : (D) 25 m
Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45
Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5
Description : Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above
Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm
Description : Formation width for cuttings for B.G. single line section is (a) 5.40 m (b) 6.20 m (c) 6.25 m* (d) 6.50 m
Last Answer : (c) 6.25 m*
Description : The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm
Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500
Last Answer : (C) Rs. 450
Description : Find the magnetic field intensity at the radius of 6cm of a coaxial cable with inner and outer radii are 1.5cm and 4cm respectively. The current flowing is 2A. a) 2.73 b) 3.5 c) 0 d) 1.25
Last Answer : c) 0