According to Manning's formula, the discharge through an open channel is (where M = Manning's constant) (A) A × M × m 1/2 × i2/3 (B) A × M × m 2/3 × i1/2 (C) A 1/2 × M 2/3 × m × i (D) A 2/3 × M 1/3 × m ×

According to Manning's formula, the discharge through an open channel is (where M = Manning's
constant)
(A) A × M × m
1/2 × i2/3
(B) A × M × m
2/3 × i1/2
(C) A
1/2 × M
2/3 × m × i
(D) A
2/3 × M
1/3 × m ×
by

1 Answer

Answer :

Answer: Option B
by

Related questions

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

A sewer has a diameter of 300 mm and slop of 1 in 400. While running full it has a mean velocity of 0.7 m/s. If both the diameter and slope are doubled (to respectively be 600 mm and 1 in 200), what will be the changed mean velocity when running half-full? Use Manning’s formula. (a) 1.59 m/s (b) 2.80 m/s (c) 0.90 m/s (d) 1.00 m/s

Description : A sewer has a diameter of 300 mm and slop of 1 in 400. While running full it has a mean velocity of 0.7 m/s. If both the diameter and slope are doubled (to respectively be 600 mm and 1 in 200), what will be the changed mean velocity ... 's formula. (a) 1.59 m/s (b) 2.80 m/s (c) 0.90 m/s (d) 1.00 m/s

Last Answer : (a) 1.59 m/s

The value of Chezy’s constant C = 157.6/(1.81 + K/ ) is used in A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Description : The value of Chezy’s constant C = 157.6/(1.81 + K/ ) is used in A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Last Answer : ANS: B

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

The formula HL = n²V²L/R 4/3 for the head loss in conduits is generally known as (A) Hazen-William's formula (B) Manning's formula (C) Darcy-Weisbach formula (D) Nikuradse formula

Description : The formula HL  = n²V²L/R 4/3 for the head loss in conduits is generally known as  (A) Hazen-William's formula  (B) Manning's formula  (C) Darcy-Weisbach formula  (D) Nikuradse formula

Last Answer : (B) Manning's formula 

In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Description : In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Last Answer : Answer: Option B

The discharge in an open channel corresponding to critical depth is (A) Zero (B) Minimum (C) Maximum (D) None of these

Description : The discharge in an open channel corresponding to critical depth is (A) Zero (B) Minimum (C) Maximum (D) None of these

Last Answer : Answer: Option C

The formula V = (1/n) r2/3 A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Description : The formula V = (1/n) r2/3 A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Last Answer : ANS: D

The formula which accepts the value of rugosity coefficient n = 0.012 to be used in Manning’s formula, is given by A. Bazin B. Crimp and Bruges C. William-Hazen D. Kutter

Description : The formula which accepts the value of rugosity coefficient n = 0.012 to be used in Manning’s formula, is given by A. Bazin B. Crimp and Bruges C. William-Hazen D. Kutter

Last Answer : ANS: B

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

In which of the following reaction equilibrium, the value of equilibrium constant Kp will be more than is Kc? (A) 2HI ⇌ H2 + I2 (B) N2O4 ⇌ 2NO2 (C) 2SO2 + O2 ⇌ 2SO3 (D) None of these

Description : In which of the following reaction equilibrium, the value of equilibrium constant Kp will be more than is Kc? (A) 2HI ⇌ H2 + I2 (B) N2O4 ⇌ 2NO2 (C) 2SO2 + O2 ⇌ 2SO3 (D) None of these

Last Answer : (B) N2O4 ⇌ 2NO2

The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Description : The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option D

The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Description : The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Last Answer : Answer: Option B

The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom (C) The sloping side is equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Last Answer : Answer: Option C

How much would the boiling point of water increase if 4 mol of sugar were added to 1 kg of water kb0.51c cmolkgfor water nd I1 for sugar?

Description : How much would the boiling point of water increase if 4 mol of sugar were added to 1 kg of water kb0.51c cmolkgfor water nd I1 for sugar?

Last Answer : Feel Free to Answer

The Unique Motorola i1?

Description : The Unique Motorola i1?

Last Answer : In most cases, a person who wants a standard yet stylish smartphone will feel perfect with the Motorola i1. This smartphone is responsive and fast even though it is fairly outdated as far as operating systems ... a bunch of money each month on overage fees, so unlimited plans are the way to go.

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

The expected discharge to be obtained from an open well sunk in coarse sand is 0.0059 cumec. If the working depression head of the well is 3 m, the minimum diameter of the well, is (A) 2 m (B) 2.25 m (C) 2.50 m (D) 3.00 m

Description : The expected discharge to be obtained from an open well sunk in coarse sand is 0.0059 cumec. If  the working depression head of the well is 3 m, the minimum diameter of the well, is  (A) 2 m  (B) 2.25 m  (C) 2.50 m  (D) 3.00 m 

Last Answer : (D) 3.00 m 

A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Last Answer : (A) Circular

The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is (A) 0.1 (B) 0.55(C) 0.95 (D) 1.85

Description : The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is (A) 0.1 (B) 0.55 (C) 0.95 (D) 1.85

Last Answer : (C) 0.95

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Description : The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Last Answer : Answer: Option B

A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Description : channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Last Answer : Answer: Option D

A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Description : A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Last Answer : Answer: Option B

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the rate of change of the discharge of the parent channel c) Parent channel discharge to the rate of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Description : Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the ... of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Last Answer : b) Outlet discharge to the rate of change of the discharge of the parent channel

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Last Answer : (D) 0.95

The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from (A) Thiem's formula (B) Darcy's formula (C) Tolman's formula (D) Dupuits formula

Description : The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from  (A) Thiem's formula  (B) Darcy's formula  (C) Tolman's formula  (D) Dupuits formula 

Last Answer : (D) Dupuits formula 

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q

If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Description : 06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Last Answer : A

The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Description : The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Last Answer : Answer: Option C

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Description : 09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Last Answer : A

What type of molecule is I2?

Description : What type of molecule is I2?

Last Answer : I2 is the diatomic molecule of iodine.

Bacterial opsonization is mediated by which one of the following? C A. Hageman factor B. Prostaglandin I2 C. Immunoglobulin G D. None of these

Description : Bacterial opsonization is mediated by which one of the following? C A. Hageman factor B. Prostaglandin I2 C. Immunoglobulin G D. None of these

Last Answer : Immunoglobulin G

Which of the following chemical reactions will be favoured by low pressure? (A) 2HI ⇌ H2 + I2 (B) N2O2 ⇌ 2NO2 (C) N2 + O2 ⇌ 2NO (D) None of these

Description : Which of the following chemical reactions will be favoured by low pressure? (A) 2HI ⇌ H2 + I2 (B) N2O2 ⇌ 2NO2 (C) N2 + O2 ⇌ 2NO (D) None of these

Last Answer : (B) N2O2 ⇌ 2NO2

Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Description : Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Last Answer : treating benzenediazonium chloride with KI

Aniline is prepared by (a) the reaction of benzene with ammonia (b) the reduction of nitrobenzene with Sn/HCl (c) the dehydrogenation of nitrobenzene (d) the reaction of nitrobenzene with I2/NaOH

Description : Aniline is prepared by (a) the reaction of benzene with ammonia (b) the reduction of nitrobenzene with Sn/HCl (c) the dehydrogenation of nitrobenzene (d) the reaction of nitrobenzene with I2/NaOH

Last Answer : the reduction of nitrobenzene with Sn/HCl

An unknown compound gave a positive Tollens' test. Treatment of the unknown with I2/NaOH gave a solid which was identified as iodoform. The unknown was? (a) Ethanal (b) Acetone (c) Propanal (d) Acetophenone

Description : An unknown compound gave a positive Tollens' test. Treatment of the unknown with I2/NaOH gave a solid which was identified as iodoform. The unknown was? (a) Ethanal (b) Acetone (c) Propanal (d) Acetophenone

Last Answer : Ethanal

Which of the following compounds does not give iodoform test on treatment with I2/NaOH?(a) Ethanol (b) Propanone (c) 2-Propanol (d) Butanone

Description : Which of the following compounds does not give iodoform test on treatment with I2/NaOH? (a) Ethanol (b) Propanone (c) 2-Propanol (d) Butanone

Last Answer : Butanone

Which of the following reagents will replace –OH group by a halogen atom? (a) HOCl (b) Br2 (c) SOCl2 (d) I2

Description : Which of the following reagents will replace –OH group by a halogen atom? (a) HOCl (b) Br2 (c) SOCl2 (d) I2

Last Answer : SOCl2

In the reaction, H2 +I2 ⇌ 2HI, addition of an inert gas will (A) Increase the partial pressure of H2 (B) Increase the partial pressure of I2 (C) Increase the total pressure and hence shift the equilibrium towards the right (D) Not affect the equilibrium conditions

Description : In the reaction, H2 +I2 ⇌ 2HI, addition of an inert gas will (A) Increase the partial pressure of H2 (B) Increase the partial pressure of I2 (C) Increase the total pressure and hence shift the equilibrium towards the right (D) Not affect the equilibrium conditions

Last Answer : (D) Not affect the equilibrium conditions Share

In case of the decomposition of hydroiodic acid (2HI ⇌ H2 + I2), addition of H2(at equilibrium condition) will (A) Increase the partial pressure of I2 (B) Decrease the partial pressure of HI (C) Diminish the degree of dissociation of HI (D) None of these

Description : In case of the decomposition of hydroiodic acid (2HI ⇌ H2 + I2), addition of H2(at equilibrium condition) will (A) Increase the partial pressure of I2 (B) Decrease the partial pressure of HI (C) Diminish the degree of dissociation of HI (D) None of these

Last Answer : (C) Diminish the degree of dissociation of HI

The boiling points of the halogens increase going from F2 to I2. What type of intermolecular forces are responsible for this trend? w) permanent dipole x) hydrogen bonding y) ion-ion attraction z) London dispersion forces

Description : The boiling points of the halogens increase going from F2 to I2. What type of intermolecular forces are responsible for this trend? w) permanent dipole x) hydrogen bonding y) ion-ion attraction z) London dispersion forces

Last Answer : ANSWER: Z -- LONDON DISPERSION FORCES