Description : The temperature at the eutectic point of the system is the __________ temperature that can be attained in the system. (A) Lowest (B) Highest (C) Average (D) None of these
Last Answer : (A) Lowest
Description : The temperature at which new grains are formed in the metal is called the __________ temperature. (A) Eutectic (B) Recrystallisation (C) Upper critical (D) Lower critical
Last Answer : (B) Recrystallisation
Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539
Last Answer : Option A
Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200
Last Answer : (A) 700 - 1000
Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0
Last Answer : (A) 15-30
Description : At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical
Last Answer : (B) Triple
Description : A spring-mass system has a natural frequency of 10 rad/sec. When the spring constant is reduced by 800 N/m, the frequency is altered by 45 percent. Find the mass and spring constant of the original system. a)11.47kg and 1147.95N/m b)8.95kg and 895.25N/m c) 7.265kg and 726.5N/m d)None
Last Answer : a)11.47kg and 1147.95N/m
Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )
Last Answer : (B) Mercury
Description : Which of the following terminology is used for the temperature at which new grains are formed in a metal? (A) Eutectic temperature (B) Lower critical temperature (C) Recrystallisation temperature (D) Upper critical temperature
Last Answer : Recrystallisation temperature
Description : The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature
Last Answer : (B) Curie temperature
Description : 72, 115, 244, ?, 760, 1147 a) 501 b) 431 c) 473 d) 459 e) 445
Last Answer : The pattern is: 72+43×1=115, 115+43×3=244, 244+43×5=459, 459+43×7=760, 760+43×9=1147 Answer: d)
Description : Alpha iron is stable __________ °C. (A) Above 1403 (B) Upto 910 (C) Above 1800 (D) Between 910 & 1403
Last Answer : (B) Upto 910
Description : How many slaves were exported between 1486 and 1493 ?
Last Answer : Much debated societal impact of the early atlantic slave trade and the role of slavery. from 1486 to 1493 the almoxarife of the slave house received 475 slaves
Description : What is 1493 divided by 6?
Last Answer : 248.8333
Description : Columbus discovered the New World in: (a) 1096 (b) 1295 (c) 1492 (d) 1493
Last Answer : (c) 1492
Description : Which of the following is NOT closely associated with a non-magnetic Phase Diagram? w) Eutectic Temperature (pron: you-tek-tik) x) Curie Point y) Solidus z) Liquidus Curves
Last Answer : ANSWER: X -- CURIE POINT
Description : an eutectic system, two elements are completely (A) Soluble in solid state (B) Insoluble in liquid state (C) Insoluble in both solid & liquid state (D) Soluble in liquid state
Last Answer : Option D
Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280
Last Answer : (D) 250-280
Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450
Last Answer : (B) 150
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (C) 250-280
Description : Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140
Last Answer : (C) 90
Description : . Sodium melts (at atmospheric pressure) at a temperature of __________ °C. (A) 58 (B) 98 (C) 348 (D) 588
Last Answer : (B) 98
Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100
Last Answer : (C) 900
Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25
Last Answer : (B) > 25
Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24
Last Answer : (B) 12
Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50
Last Answer : (C) 70
Description : Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250
Last Answer : (B) 750
Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000
Last Answer : (C) 4500
Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250
Last Answer : (B) 130
Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150
Last Answer : (C) 150
Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : Temperature of coke oven gas just before entering into saturator (for recovery of NH3 ) is about __________ °C. (A) 30 (B) 65 (C) 120
Last Answer : (B) 65
Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850
Last Answer : (B) 350 to 450
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700
Last Answer : (C) 700
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600
Last Answer : (C) 1100
Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150
Last Answer : (C) 950
Description : There are five concentric layers within the atmosphere which is differentiated on the basis of temperature. The atmospheric layer which lies close to the earth's surface in which human being along with other organisms live is called ... is about __________ °C/km. (A) 0.05 (B) 1 (C) 6.5 (D) 15
Last Answer : (C) 6.5
Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80
Last Answer : (C) 30 to 50
Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500
Last Answer : (C) 2000-2200
Description : Fermentator temperature during production of alcohol from molasses is around __________ °C. (A) 5 (B) 30 (C) 130 (D) 300
Last Answer : (B) 30
Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300
Last Answer : (B) 60-70
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900
Description : Keeping the pressure constant, to double the volume of a given mass of an ideal gas at 27°C, the temperature should be raised to __________ °C. (A) 270 (B) 327 (C) 300 (D) 540
Last Answer : (B) 327
Description : Sublimation temperature of dry ice (solid CO2) is __________ °C. (A) -273 (B) 0 (C) -78 (D) 5
Last Answer : (C) -78
Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100
Last Answer : (D) 1000-1100
Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200
Last Answer : (B) 100
Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞
Last Answer : (D) ∞
Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300
Last Answer : (A) 370