The net head under which the turbine reaches its peak efficiency at synchronous speed is called (A) Design head (B) Rated head (C) Gross head (D) Operating head

The net head under which the turbine reaches its peak efficiency at synchronous speed is called
(A) Design head
(B) Rated head
(C) Gross head
(D) Operating head
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The net speed under which the turbine reaches its peak efficiency is called (A) Design speed (B) Rated speed (C) Gross speed (D) Operating speed

Description : The net speed under which the turbine reaches its peak efficiency is called (A) Design speed (B) Rated speed (C) Gross speed (D) Operating speed

Last Answer : Answer: Option A

A hydraulic turbine having rated speed of 250 rpm is connected to a synchronous generator. In order to

Description : A hydraulic turbine having rated speed of 250 rpm is connected to a synchronous generator. In order to produce power at 50 Hz, the number of poles required in the generator are (A) 6 (B) 12 (C) 16 (D) 24

Last Answer : A hydraulic turbine having rated speed of 250 rpm is connected to a synchronous generator. In order to produce power at 50 Hz, the number of poles required in the generator are 24

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Last Answer : (b) 2000

Reema and Rahul are studying about the percentage of children in the age group 14 -15 years attending school. It means they are studying about a. Net attendance ratio b. Gross enrolment ratio c. Literacy rated. Extent of illiteracy

Description : Reema and Rahul are studying about the percentage of children in the age group 14 -15 years attending school. It means they are studying about a. Net attendance ratio b. Gross enrolment ratio c. Literacy rated. Extent of illiteracy

Last Answer : a. Net attendance ratio

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine inlet x) net heating value of the fuel y) steam pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel

Description : Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine ... pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel 

Last Answer : ANSWER: W -- STEAM TEMPERATURE AT THE STEAM TURBINE INLET 

The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Description : The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Last Answer : Answer: A

If an induction motor were to be operated at 90% rated voltage, _____________. A. there would be an increase in starting torque B. starting current would increase slightly C. synchronous speed would decrease slightly D. the slip would increase

Description : If an induction motor were to be operated at 90% rated voltage, _____________. A. there would be an increase in starting torque B. starting current would increase slightly C. synchronous speed would decrease slightly D. the slip would increase

Last Answer : Answer: D

The ratio which is a good indicator to maintain the correct selling price and efficiency of trading activity is------ a) Net profit ratio b) Gross profit ratio c) Current ratio d) Liquid ratios

Description : The ratio which is a good indicator to maintain the correct selling price and efficiency of trading activity is------ a) Net profit ratio b) Gross profit ratio c) Current ratio d) Liquid ratios

Last Answer : b) Gross profit ratio

Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Description : Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Last Answer : b) 4

The return on capital employed shows the combined effect of– (A) net profit ratio and inventory turnover ratio (B) operating ratio and net profit ratio (C) net profit ratio and capital turnover ratio (D) gross profit ratio and capital turnover ratio

Description : The return on capital employed shows the combined effect of– (A) net profit ratio and inventory turnover ratio (B) operating ratio and net profit ratio (C) net profit ratio and capital turnover ratio (D) gross profit ratio and capital turnover ratio

Last Answer : Answer: operating ratio and net profit ratio

Gross profit is calculated by subtracting ________ from _________, a. operating expenses, net income b. sales discounts from sales revenue c. cost of goods sold, net sales revenue d. merchandise inventory, cost of goods sold

Description : Gross profit is calculated by subtracting ________ from _________, a. operating expenses, net income b. sales discounts from sales revenue c. cost of goods sold, net sales revenue d. merchandise inventory, cost of goods sold

Last Answer : c. cost of goods sold, net sales revenue

Gross profit for a merchandiser is net sales minus a. operating expenses. b. cost of goods sold. c. sales discounts. d. cost of goods available for sale.

Description : Gross profit for a merchandiser is net sales minus a. operating expenses. b. cost of goods sold. c. sales discounts. d. cost of goods available for sale.

Last Answer : b. cost of goods sold.

After gross profit is calculated, operating expenses are deducted to determine a. gross margin. b. operating income. c. gross profit on sales. d. net margin.

Description : aAfter gross profit is calculated, operating expenses are deducted to determine a. gross margin. b. operating income. c. gross profit on sales. d. net margin.

Last Answer : b. operating income.

Operating ratio is calculated by A. (Operating Cost/Gross sales)*100 B. (Operating Cost/Gross sales)*100 C. (Operating cost/Net sales)*100 D. None of the above

Description : Operating ratio is calculated by A. (Operating Cost/Gross sales)*100 B. (Operating Cost/Gross sales)*100 C. (Operating cost/Net sales)*100 D. None of the above

Last Answer : C. (Operating cost/Net sales)*100

To arrive at funds from operation ,non-cash expenses must be added to---------- a) Net profit b) Gross profit c) Operating profit d) None of these

Description : To arrive at funds from operation ,non-cash expenses must be added to---------- a) Net profit b) Gross profit c) Operating profit d) None of these

Last Answer : a) Net profit

Example of activity ratios ------------------------ a) Gross profit ratio b) Net profit ratio c) Operating ratio d) Stock turn over ratio

Description : Example of activity ratios ------------------------ a) Gross profit ratio b) Net profit ratio c) Operating ratio d) Stock turn over ratio

Last Answer : d) Stock turn over ratio

Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Description : Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Last Answer : • Boiler

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing guide vane angle at inlet as 90o c) Providing runner vane angle at exit as 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Description : For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing ... 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Last Answer : d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

What is the safe maximum tripping speed of a turbine operating at 2500 rpm?

Description : What is the safe maximum tripping speed of a turbine operating at 2500 rpm?

Last Answer : The rule is to trip at 10 percent overspeed. Therefore, 2500 x 1.10 = 2750 rpm.

Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Last Answer : (B) Maximum brake horse power output

An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Description : An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Last Answer : Entire PE is converted to KE when the child reaches bottom So KE = PE 12mv2=mgH12mv2=mgH or H=v22g=162×9.8=.816mH=v22g=162×9.8=.816m

Which hormone level reaches peak during luteal phase of menstrual cycle?

Description : Which hormone level reaches peak during luteal phase of menstrual cycle?

Last Answer : Which hormone level reaches peak during luteal phase of menstrual cycle? A. Luteinising hormone B ... C. Pollicle stimulating hormone D. Estrogen.

The normal glucose tolerance curve reaches peak is (A) 15 min (B) 1 hr (C) 2 hrs (D) 2 ½ hrs

Description : The normal glucose tolerance curve reaches peak is (A) 15 min (B) 1 hr (C) 2 hrs (D) 2 ½ hrs

Last Answer : B

The index of efficiency and profitability of the business a) Operating ratio b) Operating profit ratio c) Expense ratio d) Net profit ratio

Description : The index of efficiency and profitability of the business a) Operating ratio b) Operating profit ratio c) Expense ratio d) Net profit ratio

Last Answer : b) Operating profit ratio

The power factor of an AC generator operating singularly is determined by the __________. A. connected load B. prime mover speed C. field excitation D. generator's rated voltage

Description : The power factor of an AC generator operating singularly is determined by the __________. A. connected load B. prime mover speed C. field excitation D. generator's rated voltage

Last Answer : Answer: A

If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind its normal position as it rotates. This hu A. amortisseur windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Description : If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ... windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Last Answer : Answer: A

The difference between the synchronous speed of an induction machine and its operating speed (slip) may be correctly expressed _____________. A. as a percent of synchronous speed B. as a decimal fraction of synchronous speed C. directly in revolutions per minute D. as all of the above

Description : The difference between the synchronous speed of an induction machine and its operating speed (slip) may be correctly expressed _____________. A. as a percent of synchronous speed B. as a decimal fraction of synchronous speed C. directly in revolutions per minute D. as all of the above

Last Answer : Answer: A

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Description : If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Last Answer : Answer: C

The operating speed of a synchronous motor can be changed to new fixed value by?

Last Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that (A) The head of the load reaches the section (B) The tail of the load reaches the section (C) The load position should be such that the section divides it equally on both sides (D) The load position should be such that the section divides the load in the same ratio as it divides the span

Description : When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that (A) The head of the load ... position should be such that the section divides the load in the same ratio as it divides the span

Last Answer : (D) The load position should be such that the section divides the load in the same ratio as it divides the span

The product of the power supplied to the antenna and its gain relative to a half-wave dipole in a given direction. A. Peak envelope power B. ERP C. Rated power D. Carrier power’

Description : The product of the power supplied to the antenna and its gain relative to a half-wave dipole in a given direction. A. Peak envelope power B. ERP C. Rated power D. Carrier power’

Last Answer : B. ERP

Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. The starting current is held below the rated current. D. The field winding is energized for starting purposes only.

Description : Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. ... is held below the rated current. D. The field winding is energized for starting purposes only.

Last Answer : Answer: A

A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line

Description : A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line current when operating at full load rated conditions will be  (A) 13.43 kA (B) 15.79 kA (C) 23.25 kA (D) 27.36 kA

Last Answer : A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line current when operating at full load rated conditions will be 15.79 kA

A synchronous generator is feeding a zero power factor (lagging) load at rated current. The armature reaction

Description : A synchronous generator is feeding a zero power factor (lagging) load at rated current. The armature reaction is  (A) magnetizing (B) demagnetizing (C) cross-magnetizing (D) ineffective

Last Answer : A synchronous generator is feeding a zero power factor (lagging) load at rated current. The armature reaction is demagnetizing 

A 100 kVA, 415 V(line), star-connected synchronous machine generates rated open circuit voltage of 415 V

Description : A 100 kVA, 415 V(line), star-connected synchronous machine generates rated open circuit voltage of 415 V at a field current of 15 A. The short circuit armature current at a field current of 10 A is equal to the ... unit saturated synchronous reactance is  (A) 1.731 (B) 1.5 (C) 0.666 (D) 0.577

Last Answer : 0.6

Gross and net calorific value of a fuel will be the same (A) If its ash content is zero (B) If its carbon content is very low (C) If its hydrogen/hydrogen compound content is zero (D) Under no circumstances

Description : Gross and net calorific value of a fuel will be the same (A) If its ash content is zero (B) If its carbon content is very low (C) If its hydrogen/hydrogen compound content is zero (D) Under no circumstances

Last Answer : (C) If its hydrogen/hydrogen compound content is zero

The design flood commonly adopted in India for barrages and minor dams is (a) Probable maximum flood (b) A flood of 50 – 100 years return period (c) Peak flood (d) Standard project flood or a 100-year flood, whichever is higher

Description : The design flood commonly adopted in India for barrages and minor dams is (a) Probable maximum flood (b) A flood of 50 – 100 years return period (c) Peak flood (d) Standard project flood or a 100-year flood, whichever is higher

Last Answer : (d) Standard project flood or a 100-year flood, whichever is higher

Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage efficiency C. Preheat factor for a multistage compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Description : Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage ... compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Last Answer : ANSWER : A

Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Description : Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Last Answer : In I.C. engine maximum temperature attained is higher than in gas turbine.

In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) Average temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases

Description : In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) ... temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases 

Last Answer : (c) Average temperature of heat addition in the boiler increases  

Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Description : Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Last Answer : • For better turbine control

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B