If is unit weight of water, Q the discharge in cumecs, H the pump, the H.P. of the motor is (A) H.P. = /75 (B) H.P. = /4500 (C) H.P. = /75 H (D) H.P. = /4500 H

If is unit weight of water, Q the discharge in cumecs, H
the pump, the H.P. of the motor is
(A) H.P. = /75
(B) H.P. = /4500
(C) H.P. = /75 H
(D) H.P. = /4500 H
by

1 Answer

Answer :

Answer: Option A
by

Related questions

For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head of 30 m. The minimum required horse power, is (A) 10 H.P. (B) 15 H.P. (C) 18 H.P. (D) 20 H.P.

Description : For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head  of 30 m. The minimum required horse power, is  (A) 10 H.P.  (B) 15 H.P.  (C) 18 H.P.  (D) 20 H.P. 

Last Answer : (D) 20 H.P. 

If discharge of a pump is 0.16 cumecs, the economic diameter of pipe, is (A) 0.488 m (B) 4.88 cm (C) 48.8 cm (D) 4.88 m

Description : If discharge of a pump is 0.16 cumecs, the economic diameter of pipe, is  (A) 0.488 m  (B) 4.88 cm  (C) 48.8 cm  (D) 4.88 m 

Last Answer : (A) 0.488 m 

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q

If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

Pettis formula Q = C (P.B)5/4 cumecs, is based upon (A) Rainfall and drainage area (B) Run off and drainage area (C) Drainage area and its shape (D) Drainage area

Description : Pettis formula Q = C (P.B)5/4 cumecs, is based upon (A) Rainfall and drainage area (B) Run off and drainage area (C) Drainage area and its shape (D) Drainage area

Last Answer : Answer: Option A

In a Sarda type fall, rectangular crest is used for discharge upto (A) 6 cumecs (B) 10 cumecs (C) 14 cumecs (D) 20 cumecs

Description : In a Sarda type fall, rectangular crest is used for discharge upto (A) 6 cumecs (B) 10 cumecs (C) 14 cumecs (D) 20 cumecs

Last Answer : Answer: Option C

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Last Answer : (A) 500

Burge formula Q = 19.6 (A/L2/3) cumecs is based upon (A) Rainfall and drainage area (B) Run off and drainage area (C) Drainage area and its shape (D) Drainage area

Description : Burge formula Q = 19.6 (A/L2/3) cumecs is based upon (A) Rainfall and drainage area (B) Run off and drainage area (C) Drainage area and its shape (D) Drainage area

Last Answer : Answer: Option C

Ryve's formula for flood estimate in cumecs, is (A) Q = CA3/4 (B) Q = CA2/3 (C) Q = CA1/2 (D) Q = CA1/4

Description : Ryve's formula for flood estimate in cumecs, is (A) Q = CA3/4 (B) Q = CA2/3 (C) Q = CA1/2 (D) Q = CA1/4

Last Answer : Answer: Option B

Boston society of Civil Engineer's formula Q = 0.0056 × (D/t) in cumecs/square km is based upon (A) Rainfall and drainage area(B) Total run off and drainage area (C) Drainage area and its shape (D) Drainage area

Description : Boston society of Civil Engineer's formula Q = 0.0056 × (D/t) in cumecs/square km is based upon (A) Rainfall and drainage area (B) Total run off and drainage area (C) Drainage area and its shape (D) Drainage area

Last Answer : Answer: Option B

Rs.10500 is divided among P, Q and R. So that P receives half as much as Q and Q receives half as much as R. Then then total share of P and R is A) 4500 B) 3000 C) 5000 D) 7500

Description : Rs.10500 is divided among P, Q and R. So that P receives half as much as Q and Q receives half as much as R. Then then total share of P and R is A) 4500 B) 3000 C) 5000 D) 7500

Last Answer : Answer: D)  Let amount received by R is X  Amount received by Q is X/2  Amount received by P is X/4  Profit ratio of  P,Q &R =X/4:X/2:X  =1:2:4  Total share of P&R  =10500*5/7 =Rs 7500

If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is A. 100 cm B. 90 cm C. 80 cm D. 50 cm

Description : If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is A. 100 cm B. 90 cm C. 80 cm D. 50 cm

Last Answer : ANS: A

For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Description : For the open drain (N = 0.025) shown in the below figure, the discharge is A. 26.88 cumecs B. 27.88 cumecs C. 28.88 cumecs D. 29.88 cumecs

Last Answer : ANS: C

Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Description : Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Last Answer : c) 1800 mm*

Minimum vertical clearance (VC) for a slab/ girder bridges with discharge of 0-30 cumecs is a) 300 mm b) 1500 mm c) 1800 mm d) 600 mm*

Description : Minimum vertical clearance (VC) for a slab/ girder bridges with discharge of 0-30 cumecs is a) 300 mm b) 1500 mm c) 1800 mm d) 600 mm*

Last Answer : d) 600 mm*

If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total discharge Q, the settling velocity, is (A) Q/H(B) Q/D(C) Q/(D × B) (D) Q/(L × B)

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Last Answer : Answer: Option D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Last Answer : Answer: Option C

The specific speed of a pump is defined as the speed of a unit of such a size, that it (A) Delivers unit discharge at unit head (B) Requires unit power for unit head (C) Delivers unit discharge at unit power (D) None of these

Description : The specific speed of a pump is defined as the speed of a unit of such a size, that it (A) Delivers unit discharge at unit head (B) Requires unit power for unit head (C) Delivers unit discharge at unit power (D) None of these

Last Answer : (A) Delivers unit discharge at unit head

The main draw-back of centrifugal pump, is (A) Necessity of priming (B) Discharge from pump varies with the load of water (C) For high heads, efficiency is low up to 50% (D) All the above

Description : The main draw-back of centrifugal pump, is (A) Necessity of priming (B) Discharge from pump varies with the load of water (C) For high heads, efficiency is low up to 50% (D) All the above

Last Answer : (D) All the above

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

In the estimate of design flood, Dickens assumes that high flood in cumecs, is proportional to catchment area raised to the power (A) 1/4 (B) 1/2 (C) 3/4 (D) 2/3

Description : In the estimate of design flood, Dickens assumes that high flood in cumecs, is proportional to catchment area raised to the power (A) 1/4 (B) 1/2 (C) 3/4 (D) 2/3

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

ω-oxidation takes place by the hydroxylase in microsomes involving (A) Cytochrome b (B) Cytochrome c (C) Cytochrome p-4500(D) Cytochrome a3

Description : ω-oxidation takes place by the hydroxylase in microsomes involving (A) Cytochrome b (B) Cytochrome c (C) Cytochrome p-4500(D) Cytochrome a3

Last Answer : Answer : C

Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. What is the proportion of the solution Y in the liquid in the tank after 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Description : Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. ... 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Last Answer : a Part of the tank filled by pipe P in 1 minute = 1 / 40 Part of the tank filled by pipe Q in 1 minute = 1 / 15 Part of the tank filled by pipe R in 1 minute = 1/ 30 Here we have to find the proportion of ... together in 5 minute = 5 1/8 = 5/ 8 Required proportion = (1/3) / ( 5/8) = 8 / 15

In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is given as 1500 m/s, what would be the period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Description : In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is ... period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Last Answer : (a) 6

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from (A) Thiem's formula (B) Darcy's formula (C) Tolman's formula (D) Dupuits formula

Description : The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from  (A) Thiem's formula  (B) Darcy's formula  (C) Tolman's formula  (D) Dupuits formula 

Last Answer : (D) Dupuits formula 

S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For discharge Q and coefficient of transmissibility T, the relationship, is (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1) (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) (C) S2 - S1 = (2.3Q/4 ) loge (t2/t1) (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Description : S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For  discharge Q and coefficient of transmissibility T, the relationship, is  (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1)  (B) S2 - S1 ... - S1 = (2.3Q/4 ) loge (t2/t1)  (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Last Answer : (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) 

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Last Answer : (A) 0.5

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be __________ metres. (A) 2 (B) 4 (C) 8 (D) 5.5

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be __________ metres. (A) 2 (B) 4 (C) 8 (D) 5.5

Last Answer : (A) 2

An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Description : An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Last Answer : Answer: Option D

If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Description : If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Last Answer : Answer: Option B

The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Description : The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Last Answer : Answer: Option D

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Last Answer : Answer: Option C

The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Description : The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Last Answer : Answer: Option A

An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch. (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Description : An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch. (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Last Answer : Answer: Option D

When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Description : When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Last Answer : Answer: Option A

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2

Description : The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2

Last Answer : Answer: Option D

The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Description : The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Last Answer : Answer: Option B