Description : If the depth of water in an open channel is greater than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow
Last Answer : Answer: Option C
Description : 12. The flow at critical depth in an open channel is called torrential flow. A) Yes B) No
Last Answer : B
Description : The critical depth meter is used to measure (A) Velocity of flow in an open channel (B) Depth of flow in an open channel (C) Hydraulic jump (D) Depth of channel
Description : In open channel flow in a rectangular channel, the ratio between the critical depth and the initial depth, when a hydraulic jump occurs is (A) 0.5 (B) 0.84 (C) 1.84 (D) 1.25
Last Answer : (C) 1.84
Description : The discharge in an open channel corresponding to critical depth is (A) Zero (B) Minimum (C) Maximum (D) None of these
Description : The velocity at which the flow changes from laminar flow to turbulent flow is called (A) Critical velocity (B) Velocity of approach (C) Sub-sonic velocity (D) Super-sonic velocity
Last Answer : Answer: Option A
Description : f = 16/NRe , is valid for (A) Turbulent flow (B) Laminar flow through an open channel (C) Steady flow (D) None of these
Last Answer : (D) None of these
Description : 11. The velocity at which the turbulent flow starts is known as higher critical velocity. A) Yes B) No
Last Answer : A
Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)
Description : Normal depth in open channel flow is the depth of flow corresponding to (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Uniform flow
Last Answer : Answer: Option D
Description : 15. The depth of water in a channel corresponding to the minimum specific energy is known as critical depth. A) Agree B) Disagree
Description : The critical depth in a channel can be produced (A) By raising the bottom of the channel (B) By lowering the bottom of the channel (C) By decreasing the width of the channel (D) Both (a) and (c) of above
Description : Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff
Last Answer : (D) Prandtl & Grashoff
Description : The flow in a pipe is turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these
Description : For pipes, turbulent flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000
Description : The flow in a pipe is neither laminar nor turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these
Last Answer : Answer: Option B
Description : __________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber
Last Answer : (C) Froude
Description : The ratio of width to depth for the most economical rectangular section in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2
Last Answer : (D) 2
Description : If 'x' is the depth of flow in an open channel of large width, then the hydraulic radius is equal to (A) x (B) x/2 (C) x/3 (D) 2x/3
Last Answer : (A) x
Description : The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2
Description : Normal depth in open channel flow is the depth of flow in the channel (A) Corresponding to uniform flow (B) Measured normal to the channel bed (C) Corresponding to steady flow (D) None of these
Last Answer : (A) Corresponding to uniform flow
Description : The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is (A) 0.1 (B) 0.55 (C) 0.95 (D) 1.85
Last Answer : (C) 0.95
Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only
Last Answer : (b) 1, 2, 3 & 4
Description : For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m
Last Answer : (d) 2 m
Description : If the depth of actual neutral axis of a doubly reinforced beam (A) Is greater than the depth of critical neutral axis, the concrete attains its maximum stress earlier (B) Is less ... critical neutral axis; the concrete and steel attain their maximum stresses simultaneously (D) All the above
Description : A hydraulic jump in a control meter will be formed above the control, if its original (A) Depth is more than critical depth (B) Depth is less than the critical depth (C) Depth is equal to critical depth (D) None of these
Description : The depth of neutral axis for a balanced section is --------- the depth of critical neutral axis [ A ] equal [ B ] always greater than [ C ] always less than [ D ] may be sometimes greater than
Last Answer : [ A ] equal
Description : The depth of neutral axis for over reinforced section is ----------- the depth of critical neutral axis [ A ] Equal to [ B ] Greater than [ C ] Less than [ D ] None of the above
Last Answer : [ B ] Greater than
Description : The depth of neutral axis for under reinforced section is --------- the depth of critical neutral axis [ A ] Equal to [ B ] Greater than [ C ] Less than [ D ] None of the above
Last Answer : [ C ] Less than
Description : 02. A flow in which each liquid particle does not have a definite path and the paths of individual particles also cross each other is called turbulent flow. A) Agree B) Disagree
Description : A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow
Description : A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow
Description : A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow
Description : A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady
Description : A flow in which __________ force is dominating over the viscosity is called turbulent flow. (A) Elastic (B) Surface tension (C) Viscous (D) Inertia
Description : The flow in which each liquid particle has a definite path and their paths do not cross each other is called (A) One dimensional flow (B) Streamline flow (C) Steady flow (D) Turbulent flow
Description : The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow
Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow
Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow
Description : The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : My dress is tranquil when I tread the earth, or dwell at home, or drift on the water. Sometimes my wings and this wide sky lift me over the dwellings of men, and then strong clouds carry me over ... , Illustriously sing when I am not near the earth and stream, a sailing spirit.What am I? -Riddles
Last Answer : A swan.
Description : Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain ... of Peninsular India are perennial (d) There are many streams which become torrential during rainy season
Last Answer : Ans: (c)
Description : Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain
Last Answer : (A) Partial condensation of steam
Description : Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of (A) Grashoff number (B) Grashoff number & Reynolds number (C) Reynolds number (D) Grashoff number & Prandtl number
Last Answer : Option D
Description : When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Description : The continuity equation is connected with (A) Open channel/pipe flow (B) Compressibility of fluids (C) Conservation of mass (D) Steady/unsteady flow