As the temperature is lowered towards the absolute zero, the value of the quantity (∂∆F/∂T) approaches (A) Zero (B) Unity (C) Infinity (D) None of these

As the temperature is lowered towards the absolute zero, the value of the quantity (∂∆F/∂T) approaches
(A) Zero
(B) Unity
(C) Infinity
(D) None of these
by

1 Answer

Answer :

(A) Zero
by

Related questions

As the temperature is lowered towards the absolute zero, the value of ∂(∆F)/∂T, then approaches (A) Unity (B) Zero (C) That of the heat of reaction (D) Infinity

Description : As the temperature is lowered towards the absolute zero, the value of ∂(∆F)/∂T, then approaches (A) Unity (B) Zero (C) That of the heat of reaction (D) Infinity

Last Answer : B) Zero

What is the entropy of a pure substance at a temperature of absolute zero?  a. unity  b. zero  c. infinity  d. undefined

Description : What is the entropy of a pure substance at a temperature of absolute zero?  a. unity  b. zero  c. infinity  d. undefined

Last Answer : zero

Gibbs free energy of a pure fluid approaches __________ as the pressure tends to zero at constant temperature. (A) Infinity (B) Minus infinity (C) Zero (D) None of these

Description : Gibbs free energy of a pure fluid approaches __________ as the pressure tends to zero at constant temperature. (A) Infinity (B) Minus infinity (C) Zero (D) None of these

Last Answer : (B) Minus infinity

Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : C) Either (A) or (B)

What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Description : What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Last Answer : (A) Zero

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

When the feed to a distillation column is a saturated liquid, slope of thefeed line is(A) Zero(B) Unity(C) Infinity(D) None of these

Description : When the feed to a distillation column is a saturated liquid, slope of thefeed line is (A) Zero (B) Unity (C) Infinity (D) None of these

Last Answer : (C) Infinity

What is the reflux ratio at total reflux? (A) Zero (B) Infinity (C) Unity

Description : What is the reflux ratio at total reflux? (A) Zero (B) Infinity (C) Unity

Last Answer : (B) Infinity

The conductivity in free space medium is a) Infinity b) Unity c) Zero d) Negative

Description : The conductivity in free space medium is a) Infinity b) Unity c) Zero d) Negative

Last Answer : c) Zero

The potential difference in an open circuit is a) Zero b) Unity c) Infinity d) Circuit does not exist open

Description : The potential difference in an open circuit is a) Zero b) Unity c) Infinity d) Circuit does not exist open

Last Answer : c) Infinity

For a test charge placed at infinity, the electric field will be a) Unity b) +∞ c) Zero d) -∞

Description : For a test charge placed at infinity, the electric field will be a) Unity b) +∞ c) Zero d) -∞

Last Answer : c) Zero

What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Description : What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Last Answer : (a) Zero

The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Description : The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Last Answer : (c) unity

While dissolving a gas into a liquid at a constant temperature, the ratio of the concentration of the gas in the solution phase and in the gaseous phase is (A) Infinity (B) Unity (C) Constant (D) Negative

Description : While dissolving a gas into a liquid at a constant temperature, the ratio of the concentration of the gas in the solution phase and in the gaseous phase is (A) Infinity (B) Unity (C) Constant (D) Negative

Last Answer : (C) Constant

A demand curve, which is parallel to the horizontal axis, showing quantity, has the price elasticity equal to - (1) Zero (2) One (3) Less than one (4) Infinity

Description : A demand curve, which is parallel to the horizontal axis, showing quantity, has the price elasticity equal to - (1) Zero (2) One (3) Less than one (4) Infinity

Last Answer : (4) Infinity Explanation: Price elasticity of demand measures consumer response to price changes. If consumers are relatively sensitive to price changes, demand is elastic: if they are relatively ... keeps changing with the price. So the coefficient of price elasticity of demand is infinity.

A demand curve, which is parallel to the horizontal axis, showing quantity, has the price elasticity equal to (1) Zero (2) One (3) Less than one (4) Infinity

Description : A demand curve, which is parallel to the horizontal axis, showing quantity, has the price elasticity equal to (1) Zero (2) One (3) Less than one (4) Infinity

Last Answer : Infinity

Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Description : Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Last Answer : (A) 0

When the number of sides of a polygon tends to infinity, it approaches _______.

Description : When the number of sides of a polygon tends to infinity, it approaches _______.

Last Answer : When the number of sides of a polygon tends to infinity, it approaches _______.

When testing a capacitor with an analog type ohmmeter, a good capacitor will be indicated when _____________. A. there is no meter deflection B. the meter deflects to a low resistance value and remains there C. the meter deflects to a low resistance value and slowly increases towards infinity D. the meter deflects to a low resistance value and increases rapidly to a higher value, but stays fairly low

Description : When testing a capacitor with an analog type ohmmeter, a good capacitor will be indicated when _____________. A. there is no meter deflection B. the meter deflects to a low resistance value and ... deflects to a low resistance value and increases rapidly to a higher value, but stays fairly low

Last Answer : Answer: C

When the voltage and the current developed in an AC circuit reach their peak values at the same time, the power factor is considered to be _____________. A. lagging B. leading C. unity D. infinity

Description : When the voltage and the current developed in an AC circuit reach their peak values at the same time, the power factor is considered to be _____________. A. lagging B. leading C. unity D. infinity

Last Answer : Answer: C

the exit gradient in the absence of a downstream cut-off is (A) 0 (B) Unity (C) Infinity (D) Very large

Description : the exit gradient in the absence of a downstream cut-off is (A) 0 (B) Unity (C) Infinity (D) Very large

Last Answer : Answer: Option C

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Description : In fluid flow, cavitation is caused, if the (A) Fluid velocity decreases to zero (B) Total energy decreases (C) Both (A) and (B) (D) Flow pressure approaches its vapor pressure at the prevailing temperature

Last Answer : (D) Flow pressure approaches its vapor pressure at the prevailing temperature

A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared with paint. The yellow pencil is held steady while the boy slides the blue pencil down 1 inch, continueing to press it against the yellow one. He returns the blue pencil to its former position, then again it slides down 1 inch. He continues until he has lowered the blue pencil 5 times and raised it 5 times- 10 moves in all.Supposed that during this time the paint neither dries nor diminishes in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Description : A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared ... in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Last Answer : At the start, 1inch of the yellow pencil gets smeared with wet paint. As the blue pencil is moved downward, a second inch of the blue pencils smears a second inch of the yellow pencil. Each pair ... of moves will smear 5 inches. This together with the initial inch, makes 6 inches for each pencil.

In a parallel flow heat exchanger, if the outlet temperature of hot and cold fluids are the same, then the log mean temperature difference (LMTD) is (A) Minimum (B) Maximum (C) Zero (D) Infinity

Description : In a parallel flow heat exchanger, if the outlet temperature of hot and cold fluids are the same, then the log mean temperature difference (LMTD) is (A) Minimum (B) Maximum (C) Zero (D) Infinity

Last Answer : (C) Zero

Cp of a gas at its critical temperature and pressure (A) Becomes zero (B) Becomes infinity (C) Equals 1 kcal/kmol °K (D) Equals 0.24 kcal/kmol °K

Description : Cp of a gas at its critical temperature and pressure (A) Becomes zero (B) Becomes infinity (C) Equals 1 kcal/kmol °K (D) Equals 0.24 kcal/kmol °K

Last Answer : (B) Becomes infinity

At constant temperature and pressure, for one mole of a pure substance, the ratio of the free energy to the chemical potential is (A) Zero (B) One (C) Infinity (D) Negative

Description : At constant temperature and pressure, for one mole of a pure substance, the ratio of the free energy to the chemical potential is (A) Zero (B) One (C) Infinity (D) Negative

Last Answer : (B) One

The surface tension of a liquid, at critical temperature is (A) Indeterminate (B) Zero (C) Infinity (D) Same as that at any other temperature

Description : The surface tension of a liquid, at critical temperature is (A) Indeterminate (B) Zero (C) Infinity (D) Same as that at any other temperature

Last Answer : Option B

The surface tension of a liquid, at critical temperature is (A) Indeterminate (B) Zero (C) Infinity (D) Same as that at any other temperature

Description : The surface tension of a liquid, at critical temperature is (A) Indeterminate (B) Zero (C) Infinity (D) Same as that at any other temperature

Last Answer : Option B

The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Description : The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Last Answer : (C) 0

Asymptote in a logistic growth curve is obtained when (a) K = N (b) K > N(c) K < N (d) the value of ‘r’ approaches zero

Description : Asymptote in a logistic growth curve is obtained when (a) K = N (b) K > N (c) K < N (d) the value of ‘r’ approaches zero

Last Answer : (a) K = N

Asymptote in a logistic growth curve is obtained when : (1) K = N (2) K > N (3) K < N (4) The value of 'r' approaches zero

Description : Asymptote in a logistic growth curve is obtained when : (1) K = N (2) K > N (3) K < N (4) The value of 'r' approaches zero

Last Answer : (1) K = N

When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Description : When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Last Answer : decreases

For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Last Answer : Answer : a

Where will the image be formed if he shifts the candle towards the lens at a position of 35 cm? (a) At focus (b) Between focus and pole (c) At infinity (d) Between f 2 and f 1

Description : Where will the image be formed if he shifts the candle towards the lens at a position of 35 cm? (a) At focus (b) Between focus and pole (c) At infinity (d) Between f 2 and f 1

Last Answer : (c) At infinity

The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Description : The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Last Answer : a) Absolute permeability

The total permeability in a conductor is a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Description : The total permeability in a conductor is a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Last Answer : c) Product of absolute and relative permeability

In metals, the total permittivity is a) Absolute permittivity b) Relative permittivity c) Product of absolute and relative permittivity d) Unity

Description : In metals, the total permittivity is a) Absolute permittivity b) Relative permittivity c) Product of absolute and relative permittivity d) Unity

Last Answer : a) Absolute permittivity

Which parameter is unity in air medium? a) Permittivity b) Absolute permeability c) Relative permeability d) Permeability

Description : Which parameter is unity in air medium? a) Permittivity b) Absolute permeability c) Relative permeability d) Permeability

Last Answer : c) Relative permeability

In free space, which parameter will be unity? a) Permittivity b) Absolute permittivity c) Relative permittivity d) Permeability

Description : In free space, which parameter will be unity? a) Permittivity b) Absolute permittivity c) Relative permittivity d) Permeability

Last Answer : c) Relative permittivity

As complete saturation of an adsorbent is approached, the differential heat of adsrop-tion approaches (A) That of normal condensation (B) Integral heat of adsorption (C) Zero (D) None of these

Description : As complete saturation of an adsorbent is approached, the differential heat of adsrop-tion approaches (A) That of normal condensation (B) Integral heat of adsorption (C) Zero (D) None of these

Last Answer : (A) That of normal condensation

Voids ratio of a soil mass can (A) Never be greater than unity (B) Be zero (C) Take any value greater than zero (D) Take values between 0 and 1 only

Description : Voids ratio of a soil mass can (A) Never be greater than unity (B) Be zero (C) Take any value greater than zero (D) Take values between 0 and 1 only

Last Answer : (C) Take any value greater than zero

“If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure.  a. Charle’s Law  b. Boyle’s Law  c. Dalton’s Law  d. Amagat’s Law

Description : “If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure.  a. Charle’s Law  b. Boyle’s Law  c. Dalton’s Law  d. Amagat’s Law

Last Answer : Boyle’s Law

At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Description : At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Last Answer : (B) Number of plates is infinity

. In a shell and tube heat exchanger, the tube side heat transfer co￾efficient just at the entrance of the tube is (A) Infinity (B) Zero (C) Same as average heat transfer co-efficient for tube side (D) None of these

Description : . In a shell and tube heat exchanger, the tube side heat transfer co￾efficient just at the entrance of the tube is (A) Infinity (B) Zero (C) Same as average heat transfer co-efficient for tube side (D) None of these

Last Answer : (A) Infinity

Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Description : Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Last Answer : (B) Zero

Pressure-enthalpy chart is useful in refrigeration. The change in internal energy of an ideal fluid used in ideal refrigeration cycle is (A) Positive (B) Negative (C) Zero (D) Infinity

Description : Pressure-enthalpy chart is useful in refrigeration. The change in internal energy of an ideal fluid used in ideal refrigeration cycle is (A) Positive (B) Negative (C) Zero (D) Infinity

Last Answer : C) Zero