The carryover factor in a prismatic member whose far end is fixed is (A) 0 (B) 1/2 (C) 3/4 (D) 1

The carryover factor in a prismatic member whose far end is fixed is
(A) 0
(B) 1/2
(C) 3/4
(D) 1
by

1 Answer

Answer :

(B) 1/2
by

Related questions

The stiffness factor for a prismatic beam of length L and moment of inertia I, is (A) IE/L (B) 2EI/L (C) 3EI/L (D) 4EI/L

Description : The stiffness factor for a prismatic beam of length L and moment of inertia I, is  (A) IE/L (B) 2EI/L (C) 3EI/L (D) 4EI/L

Last Answer : (A) IE/L

The zero of the graduated circle of a prismatic compass is located at (A) North end (B) East end (C) South end (D) West end

Description : The zero of the graduated circle of a prismatic compass is located at  (A) North end  (B) East end  (C) South end  (D) West end 

Last Answer : (C) South end

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ends are hinged or pin jointed (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Last Answer : (D) Both the ends are fixed

Why zero is marked at south end on a graduated circle of prismatic compass?

Description : Why zero is marked at south end on a graduated circle of prismatic compass?

Last Answer : As bearing of any line is measured with respective north direction, while observing north direction, reading should be 00 0'. Therefore when object vane is bisecting north direction, at the same ... get bearings with respective north direction always, zero is marked at south end of magnetic needle.

An angle of 45° with a chain line may be set out with (A) Optical square (B) Open cross staff (C) French cross staff (D) Prismatic square

Description : An angle of 45° with a chain line may be set out with  (A) Optical square  (B) Open cross staff  (C) French cross staff  (D) Prismatic square

Last Answer : (C) French cross staff

Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane (C) Its graduations are in whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Description : Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane ( ... whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Last Answer : (D) It is provided with a prism to facilitate reading of its graduated circle

In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Description : In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Last Answer : (D) An optical square

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The three moments equation is applicable only when (A) The beam is prismatic (B) There is no settlement of supports (C) There is no discontinuity such as hinges within the span (D) The spans are equal

Description : The three moments equation is applicable only when (A) The beam is prismatic (B) There is no settlement of supports (C) There is no discontinuity such as hinges within the span (D) The spans are equal

Last Answer : (C) There is no discontinuity such as hinges within the span

If the stress produced by a prismatic bar is equal to the working stress, the area of the cross￾section of the prismatic bar, becomes (A) Zero (B) Infinite (C) Maximum (D) Minimum

Description : If the stress produced by a prismatic bar is equal to the working stress, the area of the cross￾section of the prismatic bar, becomes  (A) Zero  (B) Infinite  (C) Maximum  (D) Minimum

Last Answer : (B) Infinite 

The ratio of elongations of a conical bar due to its own weight and that of a prismatic bar of the same length, is (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : The ratio of elongations of a conical bar due to its own weight and that of a prismatic bar of the  same length, is  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (B) 1/3 

If all the dimensions of a bar are increased in the proportion n : 1, the proportion with which the maximum stress produced in the prismatic bar by its own weight, will increase in the ratio (A) 1 : n (B) n : 1 (C) 1 : (1/n) (D) 1 : n

Description : If all the dimensions of a bar are increased in the proportion n : 1, the proportion with which the maximum stress produced in the prismatic bar by its own weight, will increase in the ratio (A) 1 : n (B) n : 1 (C) 1 : (1/n) (D) 1 : n

Last Answer : (B) n : 1

Which one of the following statements is not correct ? (a) A surveyor’s compass has two sight vanes (b) A prismatic compass has an object vane and an eye vane (c) A trough compass is an accessory to a plane table (d) In a prismatic compass the graduations on the aluminimum disc rotate and the index remains stationary

Description : Which one of the following statements is not correct ? (a) A surveyor's compass has two sight vanes (b) A prismatic compass has an object vane and an eye vane (c) A trough compass ... table (d) In a prismatic compass the graduations on the aluminimum disc rotate and the index remains stationary

Last Answer : (a) A surveyor’s compass has two sight vanes

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) Both ends are hinged or pin jointed (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) ... (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Last Answer : (d) Both the ends are fixed

A cantilever is a beam whose (a) Both ends are supported either on rollers or hinges (b) One end is fixed and other end is free (c) Both ends are fixed (d) Whose both or one of the end has overhang

Description : A cantilever is a beam whose (a) Both ends are supported either on rollers or hinges (b) One end is fixed and other end is free (c) Both ends are fixed (d) Whose both or one of the end has overhang

Last Answer : b) One end is fixed and other end is free

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

According to IS: 4561978, the column or the strut is the member whose effective length is greater than (A) The least lateral dimension (B) 2 times the least lateral dimension (C) 3 times the least lateral dimension (D) 4 times the least lateral dimension

Description : According to IS: 4561978, the column or the strut is the member whose effective length is greater than (A) The least lateral dimension (B) 2 times the least lateral dimension (C) 3 times the least lateral dimension (D) 4 times the least lateral dimension

Last Answer : Answer: Option C

The equivalent length of a column fixed at one end and free at the other end, is (A) 0.5 l (B) 0.7 l (C) 2 l (D) 1.5 l

Description : The equivalent length of a column fixed at one end and free at the other end, is (A) 0.5 l (B) 0.7 l (C) 2 l (D) 1.5 l

Last Answer : (C) 2 l

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Description : The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Last Answer : Answer: Option C

(Unanswered question from 2008) How does prismatic paint work?

Description : (Unanswered question from 2008) How does prismatic paint work?

Last Answer : answer:They start with a base coat of regular paint, then apply a very thin layer consisting of a transparent carrier filled with minute flakes (of mica, I think) coated with titanium oxides. These ... the sweet spot, the coated flakes work their magic and throw the interference color at your eye.

How does prismatic paint work?

Description : How does prismatic paint work?

Last Answer : I love it, yet I have no idea how it works either. Well not in any way that I can explain.

Which one of the following is used to remove Astigmatism for a human eye? (1) Concave lens (2) Convex lens (3) Cylindrical lens (4) Prismatic lens

Description : Which one of the following is used to remove Astigmatism for a human eye? (1) Concave lens (2) Convex lens (3) Cylindrical lens (4) Prismatic lens

Last Answer : (3) Cylindrical lens Explanation: In Astigmatism, eye cannot see objects in two orthogonal directions clearly simultaneously. This abnormality is removed by using cylindrical lens.

Which one of the following is used to remove Astigmatism for a human eye? (1) Concave lens (2) Convex lens (3) Cylindrical lens (4) Prismatic lens

Description : Which one of the following is used to remove Astigmatism for a human eye? (1) Concave lens (2) Convex lens (3) Cylindrical lens (4) Prismatic lens

Last Answer : (3) Cylindrical lens Explanation: A cylindrical lens is a lens which focuses light into a line instead of a point, as a spherical lens would.

The best soil structure for agriculture purpose is a. Platyb. Spheroid Al c. Blocky d. Prismatic

Description : The best soil structure for agriculture purpose is a. Platyb. Spheroid Al c. Blocky d. Prismatic

Last Answer : b. Spheroid Al

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

In a robot the ‘Translotry Joints’ known as ____________1. Revolute  2. Prismatic  3. Cylindrical  4. Spherical

Description : In a robot the ‘Translotry Joints’ known as ____________ 1. Revolute  2. Prismatic  3. Cylindrical  4. Spherical

Last Answer : 2

In a robot the ‘Rotary Joints’ known as ____________.  1. revolute  2. Prismatic  3. Cylindrical  4. Spherical

Description : In a robot the ‘Rotary Joints’ known as ____________.  1. revolute  2. Prismatic  3. Cylindrical  4. Spherical

Last Answer : 1

Which kind of motion get with the help of prismatic joint in robotics. (A) Rotary motion (B) Linear motion

Description : Which kind of motion get with the help of prismatic joint in robotics. (A) Rotary motion (B) Linear motion

Last Answer : B

Form which of the following is the type of joint in robotics. (A) Prismatic joint (B) Round joint (C) Revolute joint (D) Both (A) & (C)

Description : Form which of the following is the type of joint in robotics. (A) Prismatic joint (B) Round joint (C) Revolute joint (D) Both (A) & (C)

Last Answer : D

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

The survey instrument used for reconnaissance survey (a) Theodelite & Dumpty level (b) Prismatic compass & Aneriod barometer* (c) All the above (d) None of them

Description : The survey instrument used for reconnaissance survey (a) Theodelite & Dumpty level (b) Prismatic compass & Aneriod barometer* (c) All the above (d) None of them

Last Answer : (b) Prismatic compass & Aneriod barometer*

Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Description : Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Last Answer : (b) Dumpy level *

List any eight component parts of prismatic compass with their function in brief.

Description : List any eight component parts of prismatic compass with their function in brief.

Last Answer : Component parts of compass with their function. Sr.No Component Function 1 Circular metal box  To protect needle and pivot. 2 Steel pivot To carry magnetic ... prism to eye sight of observer 14 Magnetic needle To obtain the north direction. 

Explain the temporary adjustments of prismatic compass.

Description : Explain the temporary adjustments of prismatic compass.

Last Answer : Temporary Adjustments of Prismatic Compass 1. Fixing the compass to the tripod The compass is fixed on a tripod by rotating screw head of tripod stand. 2. Centering the compass The prismatic compass ... prism is moved using focusing stud so that readings on graduated ring will be seen clearly. 

State temporary adjustments of prismatic compass

Description : State temporary adjustments of prismatic compass

Last Answer : a) Setting the prismatic compass over prefixed survey station b) Centering the compass over nail point of station using plumb bob c) Leveling of compass in horizontal plane using level tube d) Focusing of prism by raising and lowering the focussing stud

Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Description : Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Last Answer : i) Prism: Reading printed on horizontal face of compass ring can be read from vertical position  ii) Lifting pin: When the instrument not in use the sight vane passes against the lifting pin which lift ... piece of hard glass provided on top of pivoted point, to reduce wear and tear of the point

State any eight component parts with its functions of prismatic compass.

Description : State any eight component parts with its functions of prismatic compass. 

Last Answer : Component parts of prismatic compass are as follows. 1. Break pin - It is used to stop the oscillations of aluminum ring. 2. Lifting pin - It lifts the magnetic needle when sight vane is folded. ... and sighting vane when the compass is not in use to protect the compass from dirt, dust etc.

State the meaning of local attraction and state its effect on prismatic compass and how it taken care of.

Description : State the meaning of local attraction and state its effect on prismatic compass and how it taken care of. 

Last Answer : Local attraction: It is the deviation or deflection of magnetic needle from its normal position under influence of external magnetic forces is called as local attraction.  Effect on prismatic compass: ... compass. 3) If local attraction still persists, it is corrected by mathematical calculation. 

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Draw labeled sketch of prismatic compass.

Description : Draw labeled sketch of prismatic compass.

Last Answer : Sketch of prismatic compass :

State the function of reflecting mirror in prismatic compass.

Description : State the function of reflecting mirror in prismatic compass. 

Last Answer : Function of reflecting mirror is to get image of an object located above or below the instrument level while bisection.

Write the values of stiffness factor for beams. i) Simply supported at both ends ii)/fixed at one end simply supported at other end

Description : Write the values of stiffness factor for beams. i) Simply supported at both ends ii)/fixed at one end simply supported at other end 

Last Answer : i)Stiffness factor for a beam Simply supported at both the ends = 3EI /L  ii) Stiffness factor for a beam fixed at one end and simply supported at other end = 4EI/L

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Description : The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Last Answer : Answer: Option B

While selecting the location of an intake for collecting surface water, the factor considered, is (A) The intake point should be near as far as possible to the treatment plant (B) The intake point should be in purer zone of the water source (C) The intake point in meandering rivers should be on concave banks (D) All the above

Description : While selecting the location of an intake for collecting surface water, the factor considered, is (A) The intake point should be near as far as possible to the treatment plant (B) The intake point should ... (C) The intake point in meandering rivers should be on concave banks (D) All the above

Last Answer : (D) All the above

P = /L² is the equation for Euler's crippling load if (A) Both the ends are fixed (B) Both the ends are hinged (C) One end is fixed and other end is free (D) One end is fixed and other end is hinged

Description : P = /L² is the equation for Euler's crippling load if  (A) Both the ends are fixed  (B) Both the ends are hinged  (C) One end is fixed and other end is free  (D) One end is fixed and other end is hinged

Last Answer : (B) Both the ends are hinged

While using three moments equation, a fixed end of a continuous beam is replaced by an additional span of (A) Zero length (B) Infinite length (C) Zero moment of inertia(D) None of the above

Description : While using three moments equation, a fixed end of a continuous beam is replaced by an additional span of (A) Zero length (B) Infinite length (C) Zero moment of inertia (D) None of the above

Last Answer : (A) Zero length